1. Introduction
Product Overview
This manual provides instructions for the safe and efficient use of your LKPower AC Adapter. This adapter is designed to provide reliable power to compatible Uniden radio scanners, including models USC230, UBC69XLT, and BC-95XLTB. It converts standard AC wall power into the DC power required by your device.
The LKPower AC adapter is manufactured with high-quality materials and tested to ensure compatibility and performance.

Image: Front and side view of the LKPower AC adapter, highlighting its design and labeling.
2. Safety Information
Important Safety Instructions
- Read all instructions before using the product.
- Do not expose the adapter to rain or moisture.
- Do not disassemble the adapter. Refer servicing to qualified personnel.
- Ensure the voltage and current ratings of the adapter match your device's requirements.
- Avoid placing the adapter in areas with poor ventilation.
- Disconnect the adapter from the power outlet when not in use for extended periods.
- Keep out of reach of children.
3. Setup
Connecting the AC Adapter
- Verify Compatibility: Ensure your device (e.g., Uniden USC230, UBC69XLT, BC-95XLTB Radio Scanner) requires the power specifications provided by this adapter.
- Connect to Device: Plug the DC output connector of the AC adapter into the power input port of your radio scanner.
- Connect to Power Outlet: Insert the AC input plug of the adapter into a standard electrical wall outlet (AC 100-240V, 50/60Hz).
- Power On Device: Once connected, your device should receive power or begin charging its battery.

Image: The AC adapter connected to a power strip, illustrating a typical setup.
4. Operating
Using Your AC Adapter
The LKPower AC adapter is designed for continuous operation when connected to a compatible device and a power outlet. It provides a stable power supply for operating your radio scanner or charging its internal battery.
Powering Your Device
Once properly connected as described in the "Setup" section, the adapter will automatically supply power to your device. There are no additional controls on the adapter itself.
Disconnecting
To disconnect, first power off your device if applicable, then unplug the AC adapter from the wall outlet, and finally disconnect the DC connector from your device.
5. Maintenance
Care and Storage
- Cleaning: Use a soft, dry cloth to clean the adapter. Do not use liquid cleaners or aerosols.
- Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cable Care: Avoid sharp bends or kinks in the power cord. Do not place heavy objects on the cord.
- Inspection: Periodically inspect the adapter and its cord for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use and replace the adapter.
6. Troubleshooting
Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on/charging | Adapter not properly plugged in | Ensure both the AC plug and DC connector are securely inserted. |
| Device not powering on/charging | Power outlet is not active | Test the outlet with another device or try a different outlet. |
| Device not powering on/charging | Adapter or device malfunction | Disconnect and reconnect. If issue persists, contact support or consider replacing the adapter. |
| Adapter feels warm | Normal operation | It is normal for the adapter to feel warm during use. If it becomes excessively hot or emits smoke/odor, unplug immediately and discontinue use. |
7. Specifications
Technical Details
- Input: AC 100-240V, 50/60Hz, 0.3A (Worldwide AC Input)
- Output: Compatible with Uniden USC230, UBC69XLT, BC-95XLTB Radio Scanners
- Protection Features: Over Voltage Protection, Over Heat Protection
- Model Number: 180130186
- Brand: LKPower
- Special Feature: Travel
- Cable Length: Approximately 76 inches (193 cm)
- Dimensions (Adapter Body): Approximately 2.6 inches (length) x 1.6 inches (width) x 1.2 inches (height)

Image: Dimensions of the AC adapter and its cable length.
8. Warranty and Support
Return Policy
This product is subject to a 30-day return policy for refund or replacement, as per the seller's terms. Please refer to your purchase documentation for specific details regarding returns.
Manufacturer
Manufactured by LKPower.
Customer Support
For technical assistance or warranty inquiries, please contact the seller, GreatComputerParts, through the platform where the purchase was made.