HOT TOOLS Pro Artist Black Gold Curling Iron, 1-1/4 inch Instruction Manual

Introduction

Thank you for choosing the HOT TOOLS Pro Artist Black Gold Curling Iron. This manual provides essential information for the safe and effective use of your new styling tool. Please read all instructions carefully before use and retain for future reference.

The Black Gold 1-1/4 inch Salon Curling Iron features a 24K gold, titanium, and Micro-Shine finish styling surface. This design allows hair to glide effortlessly along the barrel, reducing friction and potential damage. The tool is engineered to provide even heat distribution, preventing hot or cold spots for consistent styling results.

Important Safety Information

WARNING: To reduce the risk of burns, electrocution, fire, or injury to persons, observe the following precautions:

• Always unplug the appliance immediately after using.
• Do not use while bathing or in a shower.
• Do not place or store the appliance where it can fall or be pulled into a tub or sink.
• Do not place in or drop into water or other liquid.
• If an appliance falls into water, unplug it immediately. Do not reach into the water.
• This appliance is for household use only.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water.
• Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
• Never use while sleeping.
• Never drop or insert any object into any opening.
• Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
• The appliance is hot when in use. Do not let eyes or bare skin touch heated surfaces.
• Do not place the heated appliance directly on any surface while it is hot or plugged in. Use the integrated safety stand.
• Do not use an extension cord with this appliance.
• Do not touch the hot barrel. Always use the cool tip for handling.
• Unplug before cleaning or storing.

Refer to the product manual included with the product for all safety warnings.

Product Components

Familiarize yourself with the parts of your HOT TOOLS Pro Artist Black Gold Curling Iron.

• Black Gold Styling Surface: Provides even heat distribution and a smooth glide.
• Cool Tip: Designed for safe handling during styling.
• Thumb Grip: For secure and comfortable operation.
• Temperature Control Dial: Allows selection of various heat settings.
• Power Cord: 9-foot professional swivel cord for flexibility.
• Safety Stand: Integrated stand to rest the hot iron safely.

Setup and Preparation

1. Unpack: Carefully remove the curling iron from its packaging. Ensure all components are present and undamaged.
2. Placement: Place the curling iron on a heat-resistant surface, ensuring it is stable and away from water.
3. Plug In: Insert the plug into a standard electrical outlet. The curling iron features universal dual voltage, making it suitable for travel with an appropriate adapter (not included).
4. Power On: Turn the curling iron on using the power switch or by rotating the temperature dial to your desired setting. The indicator light will illuminate.
5. Heat Up: Allow the curling iron to heat up. The Pulse Technology ensures rapid heating and consistent temperature maintenance.

Operating Instructions

Temperature Settings

The curling iron offers variable temperature settings up to 455°F, suitable for various hair types and textures. Use the temperature control dial to select the appropriate heat level.

• Lower Settings (e.g., 280°F - 350°F): Ideal for fine, thin, or damaged hair.
• Medium Settings (e.g., 350°F - 400°F): Suitable for normal or medium hair.
• Higher Settings (e.g., 400°F - 455°F): Recommended for thick, coarse, or hard-to-curl hair.

Always start with a lower temperature and increase if necessary to prevent heat damage.

Curling Procedure

1. Prepare Hair: Ensure hair is clean, dry, and detangled. Apply a heat protectant spray.
2. Section Hair: Divide hair into manageable sections, typically 1-2 inches wide, using clips.
3. Position Iron: Open the clamp and place a section of hair between the clamp and the barrel, starting near the roots or mid-shaft, depending on the desired curl type.
4. Wrap Hair: Close the clamp and wrap the hair around the barrel, away from your face. Ensure the hair lies flat against the barrel for even heat distribution. Use the cool tip for support.
5. Hold: Hold the iron in place for 5-10 seconds. The exact time depends on your hair type and desired curl intensity.
6. Release: Open the clamp and gently slide the curling iron out of the curl. Allow the curl to cool completely before touching or styling to set the shape.
7. Repeat: Continue with remaining sections of hair.

Automatic Shut-off

For safety, the curling iron is equipped with a 2-hour automatic shut-off feature. If left unattended for two hours, the appliance will power down.

Care and Maintenance

1. Cleaning: Ensure the curling iron is unplugged and completely cool before cleaning. Wipe the barrel and handle with a soft, damp cloth. Do not use abrasive cleaners or immerse the appliance in water.
2. Storage: Store the curling iron in a cool, dry place, away from children. Do not wrap the cord around the appliance, as this can damage the cord.
3. Cord Care: Regularly inspect the power cord for any signs of damage. If the cord is damaged, discontinue use and contact customer support.

Troubleshooting

If troubleshooting steps do not resolve the issue, please contact customer support.

Product Specifications

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product or visit the official HOT TOOLS website. Keep your purchase receipt as proof of purchase for any warranty claims.

Manufacturer: Helen of Troy

For further assistance, you may contact HOT TOOLS customer service directly.