Siljoy 42 Inch Gold Fandelier Ceiling Fan with Light

1. Introduction

Thank you for choosing the Siljoy 42 Inch Gold Fandelier Ceiling Fan with Light. This instruction manual provides essential information for the safe installation, operation, and maintenance of your new ceiling fan. Please read this manual thoroughly before installation and keep it for future reference.

2. Safety Information

• Always disconnect power at the main circuit breaker before installation or servicing.
• Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
• Ensure the mounting structure can support the weight of the fan (approximately 24 pounds).
• Mount the fan with the lowest moving parts at least 2.3 meters (7.5 feet) above the floor.
• Do not bend fan blade holders during installation or cleaning.
• Avoid placing objects in the path of the fan blades.
• Use only replacement parts specified by the manufacturer.

3. Package Contents

Verify that all components are present and undamaged before beginning installation.

Image: All components of the Siljoy Fandelier Ceiling Fan laid out for inspection.

• Fan Motor Base with Retractable Blades
• Crystal Light Shade
• Downrods (5-inch and 10-inch options)
• Canopy
• Mounting Bracket
• Remote Control
• Hardware Bag (screws, wire nuts, R-pin, crystal clips)
• Crystal Balls (37 pieces)
• Instruction Manual
• Adapter Cover
• Spare Parts

4. Setup & Installation

Follow these steps for proper installation. Refer to the detailed installation videos for visual guidance.

4.1 Prepare the Fan Assembly

1. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Remove the screws from the fan motor base to prepare for attaching the light shade.
3. Attach the crystal light shade to the fan motor base using the provided screws. Do not fully tighten until all screws are in place.
4. Select the desired downrod length (5-inch or 10-inch). Secure the downrod to the fan motor base by tightening the screws and inserting the R-pin.
5. Slide the decorative cup and canopy onto the downrod, ensuring the fan wires pass through.

4.2 Mounting to the Ceiling

6. Secure the mounting bracket to the ceiling electrical box using appropriate screws. Ensure the bracket is firmly attached and can support the fan's weight.
7. Carefully lift the fan assembly and hang it onto the mounting bracket.
8. Connect the electrical wires: Match the fan's wires to the ceiling wires (e.g., black to black, white to white, ground to ground) using wire nuts.
9. Insert the controller into the mounting bracket, hide the wires, and secure the hanging cup.
10. Slide the canopy up to cover the mounting bracket and secure it.

4.3 Attaching Crystal Balls

11. Using the provided white gloves, attach the crystal balls to the designated hooks on the light fixture.

Installation Videos

5. Operating Instructions

Your Siljoy Fandelier offers multiple functions for comfort and ambiance, controllable via remote or a dedicated app.

5.1 Remote Control Functions

Image: Remote control and diagram of fan features including 6 wind speeds, dimming, and timer.

• Power On/Off: Use the 'ON/OFF' button for the light and 'FAN OFF' for the fan. An 'ALL OFF' button is also available.
• Light Control:
  • Brightness Adjustment: Use the brightness +/- buttons to dim or brighten the LED light (425-6120 Lumens).
  • Color Temperature: Adjust the light color from 2700K (Warm White) to 4500K (Neutral White) and 6500K (Cool White) using the color temperature buttons.
  • Night Mode: Activate a softer light setting for nighttime use.
• Fan Speed: Select from 6 wind speed settings (buttons 1-6) to suit your comfort level.
• Forward/Reverse Function: Use the 'F/R' button to switch between summer (downward airflow for cooling) and winter (upward airflow for air circulation) modes.
• Timer: Set the fan to turn off automatically after 2 hours using the '2H' button.

5.2 App Control

Image: Screenshots of the mobile application interface for controlling the fan and light.

The fan can also be controlled via a dedicated mobile application. Ensure Bluetooth is enabled on your phone. To pair, turn the ceiling fan light on and off 5 times. The app allows control over light color temperature, brightness, wind speed, wind direction, night light mode, and timing. Download the app from http://www.jasonghost.com/fanlamppro/.

5.3 Retractable Blades

The fan features invisible retractable blades that extend when the fan is on and retract when it is turned off, maintaining a sleek chandelier appearance.

6. Maintenance

Regular cleaning will help maintain the appearance and performance of your fandelier.

• Always turn off the power before cleaning.
• Use a soft, damp cloth to wipe down the fan motor base and retractable blades. Avoid harsh chemicals or abrasive cleaners.
• For the crystal components, use a soft, lint-free cloth. A mild glass cleaner can be used sparingly if needed.
• Periodically check all connections and screws to ensure they are secure.

7. Troubleshooting

If you experience issues with your fandelier, consult the following common problems and solutions:

• Fan does not operate:
  • Check that the power is on at the circuit breaker.
  • Ensure all wire connections are secure.
  • Verify remote control batteries are functional and correctly inserted.
• Light does not turn on:
  • Confirm power supply and wire connections.
  • The LED panel is replaceable; if the light source is faulty, it may need replacement.
• Fan is noisy:
  • Ensure all mounting screws are tight.
  • Check that the canopy is properly seated against the ceiling.
  • Verify that no wires are rubbing against the fan motor or canopy.
• Remote control not working:
  • Replace batteries.
  • Ensure there are no obstructions between the remote and the fan receiver.
  • Re-pair the remote with the fan if necessary (refer to app control pairing instructions).

8. Specifications

9. Warranty and Support

For warranty information or technical support, please contact Siljoy customer service through your original purchase platform. Keep your purchase receipt as proof of purchase.