Anchor Audio Beacon 2 Portable Sound System User Manual

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your Anchor Audio Beacon 2 Portable Sound System. Please read this manual thoroughly before using the system to ensure optimal performance and longevity.

The Anchor Audio Beacon 2 is a highly portable all-in-one PA system designed for mid-size events. It features a line array configuration with multiple speakers and subwoofers, offering clear and powerful audio output. Its compact, foldable design with built-in wheels and a retractable handle ensures easy transport.

Product Overview

Figure 1: The Beacon 2 system in its folded, compact configuration, ready for transport. This view highlights the integrated wheels and retractable handle.

Figure 2: The Beacon 2 system fully unfolded and extended, showcasing its line array speaker configuration for optimal sound dispersion during operation.

Figure 3: Detailed view of the rear control panel, showing various inputs, outputs, volume controls, and the AIR Companion Transmitter section.

Setup

Unfolding the System

1. Place the Beacon 2 on a flat, stable surface.
2. Release the latches securing the speaker array.
3. Carefully extend the speaker array upwards until it locks into place. Ensure all sections are securely seated.

Powering On

• Ensure the system's internal batteries are charged. Connect the power cable to a standard AC outlet if charging is needed or for continuous operation.
• Locate the main power switch on the rear panel (refer to Figure 3).
• Flip the switch to the 'ON' position. The power indicator light should illuminate.

Operating Instructions

Connecting Microphones

• The Beacon 2 supports up to four wireless microphones via its two dual wireless mic receivers.
• For wired microphones, connect them to the universal microphone jacks on the rear panel.
• Adjust the individual volume controls for each microphone input as needed.

Bluetooth Streaming

1. Activate Bluetooth on your smartphone or tablet.
2. On the Beacon 2's rear panel, press the Bluetooth pairing button. The Bluetooth indicator light will flash.
3. Select "Anchor Audio Beacon 2" from the list of available devices on your smart device.
4. Once paired, the Bluetooth indicator light will become solid. You can now stream audio wirelessly.

Auxiliary Inputs

The system includes 3.5mm and 1/4-inch aux inputs for connecting external audio sources such as laptops, MP3 players, or other audio devices. Use the corresponding volume controls to adjust the input level.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior surfaces of the system. Avoid using abrasive cleaners or solvents.
• Battery Care: For optimal battery life, fully charge the system after each use. If storing for extended periods, charge the battery every 3-6 months.
• Storage: Store the Beacon 2 in its folded, compact position in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically inspect cables, connectors, and the speaker array for any signs of wear or damage.

Troubleshooting

Specifications

• Model: BEA2-XU4
• Output Wattage: 200 Watts
• Speakers: 8 x 4-inch top speakers, 3 x 8-inch subwoofers
• Connectivity: Bluetooth, 2x Universal Microphone Jacks, 3.5mm Aux Input, 1/4-inch Aux Input
• Wireless Microphones: Supports up to 4 wireless mics (via 2 dual receivers)
• Power Source: Internal Rechargeable Batteries, AC Power
• Item Weight: 52.1 Pounds (23.6 kg)
• Product Dimensions (Folded): Approximately 31.7 x 20.2 x 15.9 inches (80.5 x 51.3 x 40.4 cm)
• Manufacturer: Anchor Audio
• UPC: 819941015376

Warranty and Support

For warranty information and technical support, please refer to the official Anchor Audio website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Anchor Audio Official Website: www.anchoraudio.com

For further assistance, you may also contact the seller, Sticky the Skunk Productions, through the Amazon platform.