Introduction
This manual provides essential instructions for the safe and effective use of your PLAY GLOW BALL 70 MM 150 GR. Please read this manual thoroughly before operating the product and retain it for future reference.
Product Overview
The PLAY GLOW BALL is a durable, illuminated ball designed for various activities. It features a new shell for enhanced grip and resistance to impacts. The integrated LED unit provides vibrant illumination.
This image shows the PLAY GLOW BALL, a 70 mm diameter, 150 gram ball, in its green variant. It highlights the smooth shell designed for grip and durability.
Setup
Battery Installation and Activation
- Locate the battery chamber: The battery chamber is recessed within the ball.
- Access the screw cap: Identify the covering screw cap, which sits below the surface of the ball.
- Unscrew the cap: Carefully turn the screw cap counter-clockwise to open the battery compartment.
- Insert batteries: Insert the 3 x L1142 batteries into the compartment, ensuring correct polarity.
- Secure the cap: Replace the screw cap and turn it clockwise until it is securely tightened.
- Activate the glow: The ball will illuminate once the batteries are correctly installed and the cap is tightened.
Important: The ball comes with 3 x L1142 batteries pre-installed, providing approximately four to five hours of glow. These batteries are commonly available in hardware shops or supermarkets for replacement.
Operating Instructions
Turning On/Off
- To turn the GLOW BALL on, ensure the battery cap is securely tightened. The LED unit will activate.
- To turn the GLOW BALL off, slightly loosen the battery cap. This disconnects the power, and the light will extinguish.
LED Features
The new LED units offer 7 bright colors, plus Strobe and Fade modes, providing excellent light diffusion for outdoor performances.
Usage Precautions
To prevent damage to the screw cap, it is recommended not to juggle or drop the balls when they are switched off. A direct impact on the cap when loose or off might damage the plastic thread.
Maintenance
Cleaning
Wipe the GLOW BALL with a damp cloth to remove dirt and debris. Avoid using harsh chemicals or abrasive cleaners, as these may damage the plastic shell.
Battery Replacement
When the glow dims significantly, it is time to replace the batteries. Follow the battery installation steps outlined in the 'Setup' section to replace the 3 x L1142 batteries.
Storage
Store the GLOW BALL in a cool, dry place away from direct sunlight when not in use. For extended storage, it is advisable to loosen the battery cap or remove the batteries to prevent drainage and potential corrosion.
Troubleshooting
- Ball does not glow:
- Check if the battery cap is securely tightened.
- Verify that the batteries are inserted with correct polarity.
- Replace the batteries if they are depleted.
- Glow is dim or inconsistent:
- The batteries may be low. Replace them with new L1142 batteries.
- Screw cap is damaged:
- Avoid dropping or juggling the ball when it is switched off, as this can cause damage to the plastic thread of the screw cap.
Specifications
- Model: GLOW BALL 70 MM 150 GR
- Diameter: 70 mm
- Weight: 150 gr
- Material: Plastic
- Batteries: 3 x L1142 (included)
- Battery Life: Approximately 4-5 hours
- Recommended Age: 12 years and up
- ASIN: B0799PGXXD
- UPC: 634547881404
Warranty Information
No specific warranty information is provided in the product details. For any warranty-related inquiries, please refer to the retailer or the official PLAY brand website.
Support
For further assistance or questions not covered in this manual, please visit the official PLAY brand website or contact the retailer from whom the product was purchased. Keep your purchase receipt for any support inquiries.
