1. Introduction
The Mikado MD-82 BL 2.0 Wooden Speaker is a versatile multimedia speaker system designed to provide high-quality audio. It features support for SD cards, USB memory devices, and an integrated FM radio tuner, offering multiple options for audio playback. This manual provides detailed instructions for the safe and efficient use of your speaker system.
Package Contents
- Mikado MD-82 BL Speaker Unit
- User Manual (This Document)
- Warranty Certificate
- Power Cable
- Remote Control
Figure 1.1: Front view of the Mikado MD-82 BL Wooden Speaker. The image shows the speaker's wooden enclosure, front-facing speaker grilles, and control panel.
2. Safety Instructions
Please read and follow these safety instructions carefully to prevent damage to the device and ensure safe operation.
- Do not expose the speaker to water, moisture, or extreme temperatures.
- Ensure proper ventilation around the speaker to prevent overheating.
- Use only the power adapter supplied with the device or one specified by the manufacturer.
- Do not open the speaker casing. Refer all servicing to qualified personnel.
- Keep the speaker away from strong magnetic fields.
- Avoid placing heavy objects on top of the speaker.
- Clean the speaker with a soft, dry cloth. Do not use liquid cleaners or aerosols.
3. Setup
Follow these steps to set up your Mikado MD-82 BL speaker system.
- Unpack the Speaker: Carefully remove all components from the packaging. Retain the packaging for future transport or storage.
- Placement: Place the speaker on a stable, flat surface. Ensure there is adequate space around the unit for ventilation.
- Connect Power: Connect the power cable to the speaker's power input port, then plug the other end into a standard electrical outlet.
- Connect Audio Sources (Optional):
- USB Drive: Insert a USB flash drive into the designated USB port.
- SD Card: Insert an SD card into the designated SD card slot.
- External Audio Device (AUX): Connect an external audio device (e.g., smartphone, MP3 player) to the AUX input port using a 3.5mm audio cable (not included).
4. Operating Instructions
Power On/Off
Press the POWER button on the speaker's control panel or the remote control to turn the speaker on or off.
Mode Selection
Press the MODE button on the control panel or remote control to cycle through available input sources: FM Radio, USB, SD Card, and AUX.
USB/SD Card Playback
- Insert your USB drive or SD card into the corresponding slot.
- Select USB or SD mode using the MODE button.
- The speaker will automatically begin playing audio files.
- Use the PLAY/PAUSE, NEXT, and PREVIOUS buttons on the speaker or remote control to manage playback.
FM Radio Operation
- Select FM mode using the MODE button.
- To automatically scan and save available FM stations, press and hold the PLAY/PAUSE button. The speaker will scan and store stations.
- Use the NEXT and PREVIOUS buttons to navigate through saved stations.
Volume Control
Adjust the volume using the VOLUME +/- buttons on the speaker's control panel or the remote control.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your speaker.
- Cleaning: Disconnect the power before cleaning. Use a soft, dry, lint-free cloth to wipe the speaker's exterior. Do not use abrasive cleaners, waxes, or solvents.
- Storage: If storing the speaker for an extended period, disconnect it from power and store it in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ventilation: Ensure that the ventilation openings are not blocked by dust or debris.
6. Troubleshooting
Refer to the table below for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected; Power outlet not working | Check power cable connection; Try a different outlet |
| No sound | Volume too low; Incorrect mode selected; Audio source issue | Increase volume; Select correct input mode (USB, SD, FM, AUX); Check audio source device |
| USB/SD card not playing | Card/drive not inserted correctly; Incompatible file format; Corrupted files | Reinsert card/drive; Ensure files are in a supported format (e.g., MP3); Try a different card/drive |
| Poor FM reception | Weak signal; Interference | Relocate the speaker; Perform an auto-scan again; Extend the antenna if available |
| Remote control not working | Batteries depleted; Obstruction between remote and speaker | Replace remote control batteries; Ensure clear line of sight to the speaker's IR receiver |
7. Specifications
Detailed technical specifications for the Mikado MD-82 BL speaker.
| Feature | Detail |
|---|---|
| Brand | Mikado |
| Model Number | MD-82 BL |
| Speaker Maximum Output Power | 15 Watt |
| Frequency Response | 22 KHz |
| Connectivity Technology | USB |
| Mounting Type | Tabletop Mount |
| Speaker Type | Stereo |
| Control Method | Remote |
| Surround Sound Channel Configuration | 1+1 |
| Product Weight | 20.36 Kilograms |
| Compatible Devices | Desktop Computer |
| Power Source | Battery Powered |
| Connectivity Protocol | Free Control |
| Manufacturer | Mikado |
| Country of Origin | China |
8. Warranty and Support
Warranty Information
This product is covered by a 2-year manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and material faults under normal use conditions. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or the Mikado customer support service. Refer to the contact information provided with your purchase documentation or visit the official Mikado website for support details.