Bones Reds
Bones Reds Bearings Instruction Manual
Model: Reds | Brand: Bones
1. Product Overview
Bones Reds Bearings are precision skate bearings designed for optimal performance and durability in skateboards, longboards, and roller skates. They are engineered to provide a smooth and fast ride, featuring a single, non-contact, removable rubber shield for easy cleaning and reduced friction. Each set is pre-lubricated with Speed Cream racing lubricant and includes all necessary components for installation.
This image displays the Bones Reds Bearings product, including the packaging box, eight individual bearings, four black spacers, and eight silver washers, all essential components for skateboard or roller skate wheel assembly.
2. What's Included
Each Bones Reds Bearings package contains the following items:
- 8 x Bones Reds Bearings
- 4 x Spacers
- 8 x Washers
3. Key Features
- Single, non-contact, removable rubber shield: Facilitates easy cleaning and minimizes friction for enhanced speed.
- High speed Nylon ball retainer: Provides increased strength and contributes to higher rotational speeds.
- Pre-lubricated with Speed Cream racing lubricant: Ensures optimal performance directly out of the box.
- Skate Rated clearances, tolerances, materials, and lubricant: Engineered for superior performance and extended durability in skateboarding applications.
4. Setup and Installation
Proper installation of your Bones Reds Bearings is crucial for optimal performance and longevity. Follow these general steps or refer to the instructional video for a visual guide.
- Remove the old bearings from your wheels, if applicable.
- Place one bearing into the wheel hub.
- Insert a spacer into the wheel, between the two bearing seats.
- Press the second bearing into the other side of the wheel hub. Ensure both bearings are seated flush.
- Place a washer on the axle, then slide the wheel onto the axle.
- Add another washer to the outside of the wheel, then secure with the axle nut. Do not overtighten; the wheel should spin freely with minimal side-to-side play.
This video demonstrates the proper assembly process for Bones Bearings, showing how to install the bearings into skateboard wheels, including the use of spacers and washers. It provides a visual guide for users to correctly set up their bearings.
5. Operating Instructions
Bones Reds Bearings are designed for immediate use. They come pre-lubricated and do not require a break-in period. For optimal performance, ensure your wheels are properly installed and the axle nuts are tightened correctly, allowing the wheels to spin freely without excessive wobble.
6. Maintenance
Regular maintenance extends the life and performance of your Bones Reds Bearings. The removable rubber shield allows for easy cleaning and re-lubrication.
Cleaning Procedure:
- Carefully remove the bearings from your wheels.
- Gently pry off the single rubber shield using a thin, non-metallic tool to avoid damage.
- Clean the bearings using a specialized bearing cleaner or a non-corrosive solvent. Agitate the bearings in the cleaning solution to remove dirt and debris.
- Allow the bearings to dry completely. Avoid spinning dry bearings as this can cause wear.
- Apply 2-3 drops of a high-quality skate bearing lubricant, such as Bones Speed Cream, to each bearing.
- Re-install the rubber shield, ensuring it is securely seated.
- Re-install the bearings into your wheels.
This diagram illustrates the internal components of a Bones Reds bearing in an exploded view. It clearly labels the outer race, the individual ball bearings, the high-speed nylon ball retainer, the inner race, and the removable rubber shield, providing insight into the bearing's construction.
7. Troubleshooting
If you experience issues with your Bones Reds Bearings, consider the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bearings feel slow or sticky | Accumulated dirt, lack of lubrication, or overtightened axle nuts. | Clean and re-lubricate bearings (see Maintenance section). Check axle nut tightness; wheels should spin freely with minimal side-to-side play. |
| Unusual noise (grinding, squeaking) | Dirt inside bearings, damaged components, or insufficient lubrication. | Clean and re-lubricate bearings. Inspect for visible damage. If noise persists after cleaning and lubrication, bearings may need replacement. |
| Wheel wobble or excessive play | Loose axle nut, missing washers/spacers, or improperly seated bearings. | Ensure axle nuts are snug but not overtightened. Verify all washers and spacers are present and correctly installed. Re-seat bearings firmly into the wheel hubs. |
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | Bones |
| Model | Reds |
| Material | Alloy Steel, Nylon |
| Bearing Number | 8 |
| Bearing Type | Ball Bearing |
| Included Components | 8 REDS bearings, 4 Spacers, 8 Washers |
| Compatible Lubricant | Skate-rated lubricant (e.g., Bones Speed Cream) |
| Specification Met | Skate Rated |
| Item Weight | 2.88 ounces |
| Item Dimensions (L x W x H) | 5 x 2 x 1 inches |
9. Warranty Information
Bones Bearings products are manufactured to high-quality standards. For specific warranty details regarding your Bones Reds Bearings, please refer to the official Bones Bearings website or contact their customer support directly. Keep your proof of purchase for any warranty claims.
10. Customer Support
For further assistance, technical questions, or support regarding your Bones Reds Bearings, please visit the official Bones Bearings website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.
You can also visit the Bones Store on Amazon for additional product information and resources.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.