UpBright 10V AC Adapter Instruction Manual

Introduction

This manual provides essential information for the safe and efficient use of your UpBright 10V AC Adapter. This adapter is designed to power and charge compatible Skil and Bosch 7.2V Li-Ion cordless tools. Please read this manual thoroughly before use to ensure proper operation and longevity of your device.

Compatibility

The UpBright 10V AC Adapter is compatible with a range of Skil and Bosch 7.2V Li-Ion tools. Verify your device's model number against the list below to ensure compatibility.

• Skil Models: 2364, F012236400, F0122364AA, 2372-01, F012237200, 2362, F012236200, 2363, F012236300, 2364-02, 2364-02-RT, 2372-01, F0122372AA, 2362-01, 2362-06, 2363
• Bosch Part #: 1619X03241
• Tool Types: 7.2V Li-Ion Cordless Drill Driver, Power Wrench

Important Note: The 7.2V specification refers to the drill's battery voltage, not the charger's output voltage. This adapter provides 10V output. This adapter is designed for direct connection to the tool or battery pack, excluding charging cradles unless specified by the tool manufacturer.

This image illustrates various barrel connector types. Ensure your device's charging port matches the "Without Pin inside" type for proper connection with this adapter. The adapter features a standard barrel round plug tip.

Setup and Connection

1. Inspect the Adapter: Before first use, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
2. Verify Power Requirements: Ensure your power outlet provides 100-240VAC, 50/60Hz, which is compatible with this adapter's input.
3. Connect to Device: Carefully insert the barrel connector tip of the adapter into the charging port of your compatible Skil or Bosch tool. Ensure a snug fit.
4. Connect to Power Outlet: Plug the AC adapter into a standard wall outlet.
5. Charging Indicator: The adapter may feature a charging indicator (e.g., an LED light) to show when it is receiving power or charging. Refer to your tool's manual for specific charging status indicators.

A view of the UpBright 10V AC Adapter, showing the main unit, power cable, and the barrel connector tip. This is the primary component for connecting to your tool.

A detailed close-up of the barrel connector tip, highlighting its design for secure connection to compatible devices.

International Use

For international orders, a suitable outlet adapter (AU, EU, or UK type) may be included to fit your country's power sockets. The main AC adapter supports worldwide input voltage (100-240VAC).

This image displays examples of AU, EU, and UK type outlet adapters that may be provided for international compatibility with the UpBright AC adapter.

Operating Instructions

Once connected, the adapter will begin to supply power to your tool or charge its battery. The charging process is typically managed by the tool's internal circuitry. Always refer to your tool's specific user manual for detailed charging instructions and expected charging times.

• Ensure the adapter is placed in a well-ventilated area during operation.
• Do not cover the adapter while it is in use.
• Disconnect the adapter from the power outlet when not in use for extended periods.

Care and Maintenance

• Cleaning: Disconnect the adapter from all power sources before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
• Handling: Do not drop or subject the adapter to strong impacts. Avoid pulling the cable to disconnect from the wall outlet or device; always grasp the plug or connector directly.

Troubleshooting

If your device is not charging or receiving power, consider the following:

• Check Connections: Ensure the adapter is securely plugged into both the wall outlet and your device.
• Verify Power Outlet: Test the wall outlet with another known working appliance to confirm it is supplying power.
• Device Battery Condition: Rechargeable batteries have a limited lifespan (typically 1 to 3 years). If your tool's battery is old or depleted beyond its capacity to hold a charge, it may not accept a charge even with a functional adapter. This is a battery issue, not an adapter malfunction.
• Adapter Functionality: To confirm if the adapter is working, a voltmeter can be used to check its output voltage. The adapter should output approximately 10V DC.
• Compatibility: Double-check that your device model is listed as compatible with this adapter.

If issues persist after following these steps, please contact UpBright customer support.

Product Specifications

Warranty and Support

Your UpBright AC Adapter comes with the following warranty:

• Refund Policy: 30 days refund period from the date of purchase.
• Exchange Policy: 24 months exchange period for defective units.

For warranty claims or technical assistance, please contact UpBright customer support through the retailer where the product was purchased or visit the official UpBright store page.

This image shows the UpBright AC Adapter alongside a graphic indicating a limited warranty certificate, reinforcing the product's warranty coverage.

You can find more information and support at the UpBright Store.