1. Introduction
This manual provides essential information for the safe and efficient use of your Reality Marc Table Lamp. Please read these instructions carefully before assembly and operation, and retain them for future reference.
Safety Information
- Ensure the power supply is disconnected before installation, cleaning, or maintenance.
- This product is designed for indoor use only (IP20 rating).
- Do not exceed the maximum wattage of 25 Watts for the E27 bulb.
- Keep the lamp away from water and moisture.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
2. Package Contents
Please check that all components are present and undamaged:
- 1x Marc Table Lamp (with grey metal shade and grey natural wood base)
- 1x Power cable with in-line switch
- Bulb not included (requires 1x E27, max. 25W incandescent bulb)
Image 1: The Reality Marc Table Lamp, featuring a grey metal shade and a grey natural wood base. The lamp is shown from a front-side angle, highlighting its industrial style and adjustable head.
3. Setup Instructions
Follow these steps to set up your Marc Table Lamp:
- Unpack: Carefully remove all components from the packaging.
- Placement: Place the lamp on a stable, flat surface suitable for table mounting. Ensure there is adequate space around the lamp for heat dissipation and to prevent accidental knocking.
- Install Bulb: Screw an E27 incandescent bulb (max. 25 Watts) into the lamp holder. Do not overtighten. Ensure the bulb is securely seated.
- Connect Power: Insert the power plug into a suitable 230 Volt wall socket.
Image 2: Technical drawing illustrating the dimensions of the Marc Table Lamp. It shows the lamp's height (210mm), width (195mm), depth (125mm), and the diameter of the shade (120mm), along with the power cable length (1200mm) and the position of the in-line switch.
4. Operating Instructions
The Marc Table Lamp is simple to operate:
- Turning On/Off: Locate the in-line switch on the power cable. Press the switch to turn the lamp on or off.
- Adjusting Light Direction: The lamp features an adjustable arm. Gently loosen the knob on the side of the lamp head, adjust the shade to your desired angle for reading or ambient lighting, and then tighten the knob to secure it in place.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your lamp.
Cleaning
- Always disconnect the lamp from the power supply before cleaning.
- Wipe the lamp with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or polishing agents as they may damage the finish.
Bulb Replacement
- Ensure the lamp is unplugged and the bulb has cooled down completely before attempting to replace it.
- Carefully unscrew the old E27 bulb.
- Screw in a new E27 incandescent bulb (max. 25 Watts).
6. Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power supply. Bulb is faulty or loose. Switch is off. | Check if the plug is securely in the socket. Replace or tighten the bulb. Ensure the in-line switch is in the 'on' position. |
| Light flickers. | Loose bulb connection. Faulty bulb. | Tighten the bulb. Replace the bulb. |
| Lamp gets too hot. | Incorrect bulb wattage. | Ensure the bulb wattage does not exceed 25 Watts. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | RL LIVE YOUR LIGHT |
| Manufacturer | Reality Leuchten |
| Model Number | R50721011 Marc |
| Dimensions (L x W x H) | 12.5 x 19.5 x 21 cm |
| Weight | 414 g |
| Material | Metal (shade), Natural Wood (base) |
| Color | Grey |
| Style | Industrial |
| Finish Type | Powder coating |
| IP Rating | IP20 |
| Number of Bulbs | 1 |
| Bulb Type | Incandescent (not included) |
| Cap Type | E27 |
| Max Wattage | 25 Watts |
| Voltage | 230 Volts |
| Switch Style | In-line |
| Special Features | Adjustable arm |
| Country of Origin | China |
8. Warranty Information
For warranty details, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
9. Support
If you require further assistance or have questions not covered in this manual, please contact your retailer or the manufacturer, Reality Leuchten, for support.
