1. Introduction
Thank you for choosing the Reality Leuchten Marc Table Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read these instructions carefully before assembly and operation, and retain them for future reference.
2. Safety Information
- Always disconnect the lamp from the power supply before cleaning, maintenance, or changing the light bulb.
- Ensure the power cord is not damaged or pinched. Do not operate the lamp with a damaged cord or plug.
- This lamp is designed for indoor use only. Do not expose it to moisture or extreme temperatures.
- Use only light bulbs with the specified wattage and base type (E27, max. 25 Watt). Exceeding the maximum wattage can cause overheating and damage.
- Keep the lamp away from flammable materials.
- Do not attempt to modify or repair the lamp yourself. Contact qualified personnel for service.
3. Package Contents
Please check that all parts are present and undamaged:
- 1 x Marc Table Lamp unit (with integrated power cable)
Note: Light bulb is not included in the package. An E27 bulb, max. 25 Watt, is required.
4. Setup and Assembly
The Marc Table Lamp requires minimal assembly.
- Carefully remove all packaging materials.
- Place the lamp on a stable, flat surface.
- Insert an E27 light bulb (max. 25 Watt) into the lamp holder by screwing it clockwise until secure. Do not overtighten.
- Connect the power plug to a suitable wall outlet.
Figure 1: Product dimensions and components. Dimensions are approximately 12.5 x 19.5 x 21 cm.
5. Operating Instructions
To operate your Marc Table Lamp:
- Ensure the lamp is properly assembled and connected to a power source.
- Locate the inline switch on the power cable.
- Press the switch to turn the lamp ON or OFF.
- The lamp shade can be individually tilted to direct the light as desired. Gently adjust the shade by loosening the side knobs, positioning the shade, and then tightening the knobs to secure it.
Figure 2: The Marc Table Lamp in operation, showcasing its adjustable shade.
6. Maintenance
To ensure the longevity and appearance of your lamp:
- Before cleaning, always unplug the lamp from the power outlet.
- Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Regularly check the power cord for any signs of wear or damage.
- When changing the light bulb, ensure the lamp is cool and unplugged.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power, faulty bulb, loose connection. | Check if the plug is fully inserted. Test the outlet with another device. Replace the light bulb. Ensure the bulb is screwed in tightly. |
| Light flickers. | Loose bulb, incompatible bulb, unstable power supply. | Tighten the light bulb. Try a different bulb. Check the power outlet. |
| Lamp gets too hot. | Bulb wattage too high. | Ensure the bulb wattage does not exceed 25 Watt. Replace with a lower wattage bulb if necessary. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | R50721031 Marc |
| Product Dimensions | 12.5 x 19.5 x 21 cm (Depth x Width x Height) |
| Weight | 414 Grams |
| Lamp Base | E27 |
| Max. Wattage | 25 Watt |
| Finish Type | White Matt |
| Color | White |
| Special Features | Adjustable shade |
| Components Included | Power cable |
| Batteries Required | No |
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact the manufacturer directly. Keep your proof of purchase for warranty claims.
For further assistance, please visit the official RL LIVE YOUR LIGHT website or contact their customer service.
