1. Introduction
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your EVGA SuperNOVA 750 G+ Power Supply. The EVGA SuperNOVA G+ series offers high performance and value, featuring 80 PLUS Gold efficiency, fully modular cabling, and a fluid-dynamic bearing fan for quiet operation.
2. Safety Information
Please read and understand all safety instructions before installing or operating the power supply. Failure to do so may result in personal injury or damage to the product and other components.
- Ensure the power supply is disconnected from the AC power outlet before installation or maintenance.
- Do not open the power supply casing. There are no user-serviceable components inside, and opening it voids the warranty and poses a risk of electric shock.
- Install the power supply in a well-ventilated area, away from heat sources and moisture.
- Use only the modular cables provided with this EVGA power supply. Using incompatible cables may cause damage.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
3. Package Contents
Verify that all items are present in the package:
- EVGA SuperNOVA 750 G+ Power Supply
- Modular Cable Set (various types for motherboard, CPU, PCIe, SATA, Peripherals)
- AC Power Cord
- Power ON Self Tester
- Mounting Screws
- User Manual (this document)
Figure 3.1: Overview of included modular cables and accessories.
4. Product Overview
The EVGA SuperNOVA 750 G+ is a fully modular power supply designed for high efficiency and stable power delivery to your computer components.
Figure 4.1: EVGA SuperNOVA 750 G+ Power Supply with packaging.
Figure 4.2: Angled view of the power supply, highlighting its compact design and fan.
Figure 4.3: Rear panel of the power supply with AC input and power switch.
Figure 4.4: Modular cable connection panel, indicating various output ports.
Figure 4.5: Power supply specification label with electrical ratings.
5. Setup and Installation
Follow these steps to properly install your EVGA SuperNOVA 750 G+ Power Supply into your computer system.
- Preparation: Ensure your computer is completely powered off and unplugged from the wall outlet. Open your computer case to access the power supply mounting area.
- Mounting the PSU: Carefully slide the EVGA SuperNOVA 750 G+ into the power supply bay of your computer case. Secure it using the provided mounting screws.
- Cable Connection:
- Connect the 24-pin ATX cable to the motherboard.
- Connect the 4+4-pin or 8-pin EPS/CPU cable(s) to the motherboard's CPU power connector(s).
- Connect the 6+2-pin PCIe cables to your graphics card(s) as required.
- Connect SATA power cables to your storage drives (HDDs, SSDs) and optical drives.
- Connect peripheral (Molex) cables to any other components requiring them (e.g., case fans, fan controllers).
Note: Only connect the cables you need to reduce cable clutter and improve airflow.
- Power ON Self Tester: Before installing the PSU into your system, you can use the included Power ON Self Tester to verify basic functionality. Plug the 24-pin ATX cable into the tester, then plug the AC power cord into the PSU and a wall outlet. If the PSU fan spins, it indicates basic functionality. Disconnect the AC power and remove the tester before proceeding with full system installation.
- Finalizing: Route cables neatly to ensure proper airflow. Close your computer case. Connect the AC power cord to the power supply and then to a wall outlet.
No official seller videos are available for the setup process. Please refer to the detailed instructions above.
6. Operating Instructions
Once installed, the EVGA SuperNOVA 750 G+ Power Supply operates automatically to provide stable power to your system. Ensure the power switch on the rear of the PSU is in the 'ON' (I) position before powering on your computer.
- The power supply's fan will operate as needed to maintain optimal temperatures. The fluid-dynamic bearing fan is designed for quiet operation.
- The 80 PLUS Gold certification ensures high energy efficiency, reducing wasted heat and electricity consumption.
7. Maintenance
Proper maintenance helps ensure the longevity and optimal performance of your power supply.
- Dust Cleaning: Periodically clean dust from the power supply's fan intake and exhaust grilles using compressed air. Ensure the power supply is unplugged before cleaning.
- Cable Management: Ensure cables are not obstructing airflow within the computer case.
- Environmental Conditions: Operate the power supply within recommended temperature and humidity ranges.
8. Troubleshooting
If you encounter issues with your power supply, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Power supply does not turn on. |
|
|
| System unstable or crashes. |
|
|
| Loud fan noise. |
|
|
If issues persist after following these steps, please contact EVGA customer support.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | EVGA |
| Model Name | 120-GP-0750-X1 |
| Series | 120-GP-0750-X1 |
| Output Wattage | 750 Watts |
| 80 PLUS Rating | Gold certified (90% efficiency at 115VAC / 92% at 220-240VAC) |
| Form Factor | ATX |
| Fan Size/Bearing | 135mm Fluid Dynamic Bearing |
| Protections | OVP, UVP, OCP, OPP, SCP, OTP |
| Dimensions (LxWxH) | 6.7 x 5.9 x 3.4 inches (170 x 150 x 86 mm) |
| Item Weight | 7 pounds (3.17 kg) |
| Connector Type | 24-pin (fully modular) |
10. Warranty and Support
The EVGA SuperNOVA 750 G+ Power Supply comes with a World Leading 10-Year Warranty, demonstrating EVGA's commitment to quality and reliability.
For technical support, warranty claims, or further assistance, please visit the official EVGA website or contact their customer service department. Keep your proof of purchase for warranty purposes.
EVGA Support: www.evga.com/support/
