Introduction
The Rowenta Pro Master Xcel steam iron is engineered for efficient and professional-quality ironing at home. It features a Microsteam 400D soleplate for optimal steam distribution and a powerful steam output to tackle stubborn creases. Designed for user comfort, it includes an ergonomic handle, a large water tank with a transparent window, and safety features like auto-off.
Key Features:
- Microsteam 400D Soleplate: Provides superior steam distribution with 400 active holes for ultra-fast ironing.
- Powerful Steam Output: Delivers a 200 g/min steam boost to effectively smooth tough creases.
- High-Precision Tip: Designed for easy access to difficult areas like collars and seams.
- Durable Construction: Made with high-quality stainless steel and an integrated anti-calc system for long-lasting performance.
- Easy Refills: Features a transparent 12 oz water tank window for convenient monitoring and refilling.
- Auto-Off Feature: Enhances safety by automatically shutting off the iron when left unattended.
Setup
1. Unpacking:
Carefully remove the iron and all accessories from the packaging. Retain packaging for future storage or transport.
2. Filling the Water Tank:
- Ensure the iron is unplugged and cooled down.
- Open the water inlet cover located at the front of the iron.
- Fill the 12 oz water tank with tap water up to the "MAX" line. Distilled water is recommended to prevent mineral buildup, especially in hard water areas.
- Close the water inlet cover securely.
Image: Front view of the Rowenta DW8260 iron, showing the water inlet cover and overall design.
Operating Instructions
1. Powering On and Temperature Selection:
- Plug the iron into a suitable electrical outlet (1750-Watts).
- Turn the temperature dial to select the appropriate heat setting for your fabric type (e.g., Linen, Cotton, Wool, Silk, Synthetic). Refer to garment care labels for guidance.
- The indicator light will illuminate while the iron is heating up and turn off when the selected temperature is reached.
Image: Close-up of the iron's control panel, highlighting the temperature dial and steam buttons.
2. Steam Functions:
- Continuous Steam: Once the iron reaches the desired temperature (usually higher settings), steam will be continuously emitted from the soleplate. Adjust the steam output using the steam control slider.
- Steam Boost (Shot of Steam): For stubborn wrinkles, press the "Steam Boost" button (often located under the handle or on top). This delivers a powerful burst of steam (200 g/min). Wait a few seconds between bursts to allow the iron to reheat.
- Spray Function: Press the "Spray" button to mist water onto the fabric, which can help in smoothing out creases before ironing.
- Vertical Steaming: The iron can be used vertically to steam hanging garments, drapes, or upholstery. Hold the iron a few inches away from the fabric and press the "Steam Boost" button.
Image: The iron in action, demonstrating its powerful steam output on a garment.
3. Auto-Off Safety Feature:
For safety, the iron will automatically shut off if left unattended. If left horizontally, it will shut off after approximately 30 seconds. If left vertically on its heel rest, it will shut off after approximately 8 minutes. To restart, simply move the iron.
Maintenance
1. Cleaning the Soleplate:
To clean the soleplate, use a damp cloth and a non-abrasive cleaner. Do not use metallic pads or abrasive cleaning agents as they can damage the soleplate.
2. Anti-Calc System (Self-Clean):
The iron features an integrated anti-calc system to prevent mineral buildup. For optimal performance, perform the self-clean function regularly (e.g., once a month, depending on water hardness).
- Fill the water tank to the MAX line.
- Set the temperature to maximum and plug in the iron.
- Once the indicator light turns off, unplug the iron.
- Hold the iron horizontally over a sink.
- Press and hold the "Self Clean" button (if available, otherwise refer to manual for specific anti-calc procedure) while gently shaking the iron. Hot water and steam will flush out mineral deposits.
- Release the button when the tank is empty.
- Allow the iron to cool completely before storing.
3. Storage:
Always empty the water tank after each use. Store the iron upright on its heel rest to prevent damage to the soleplate.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Iron does not heat up. | Not plugged in; Auto-off activated; Temperature dial set to minimum. | Check power connection; Move the iron to reactivate; Adjust temperature dial to desired setting. |
| No steam or insufficient steam. | Water tank empty; Temperature too low for steam; Steam vents clogged. | Fill water tank; Increase temperature setting; Perform self-clean function. |
| Water leaks from soleplate. | Temperature too low for steam (water condenses); Water tank overfilled; Water inlet cover not closed properly. | Increase temperature setting; Do not overfill past MAX line; Ensure water inlet cover is sealed. |
| Iron leaves marks on fabric. | Soleplate is dirty; Incorrect temperature for fabric. | Clean the soleplate; Adjust temperature according to fabric type. |
Specifications
- Brand: Rowenta
- Model: DW8260 (Pro Master Xcel Steam Iron)
- Wattage: 1750 Watts
- Soleplate Material: Microsteam 400D Stainless Steel
- Steam Output: 200 g/min steam boost
- Water Tank Capacity: 12 oz (approximately 350 ml)
- Special Features: Auto Shutoff, Anti-Calc System, High-Precision Tip
- Product Dimensions: 12 x 5 x 7 inches
- Item Weight: 3.5 pounds
- Manufacturer: Groupe SEB
- UPC: 014501164628
Official Product Videos
Product Overview Video
This video provides a general overview of the Rowenta Steam Iron, demonstrating its features and ease of use. It highlights the design and basic functionalities.
IRONDAY 1700W Steam Iron for Clothes 14.07oz Water Tank
This video showcases the IRONDAY steam iron, which shares similar features and wattage with the Rowenta DW8260, including water tank capacity and steam capabilities. It provides a visual demonstration of ironing various garments.
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your product or visit the official Rowenta website. Keep your proof of purchase for warranty claims.
Manufacturer: Groupe SEB
