Coaster Home Furnishings Dorian Full Size Panel Bed User Manual

1. Product Overview

The Coaster Home Furnishings Dorian Full Size Panel Bed (Model 300762F) is an upholstered bed designed for comfort and style. It features a padded headboard, a low footboard, and a sturdy wooden frame with reinforced batten slats. The bed is finished in a rich brown faux leather upholstery with sleek black legs.

Image 1.1: Front view of the Coaster Dorian Full Size Panel Bed, showcasing the brown faux leather upholstery and padded headboard.

Key Features:

• Size: Full
• Upholstery: Faux Leather
• Color: Brown
• Headboard: Padded, Upholstered
• Frame: Sturdy wooden frame with reinforced batten slats
• Dimensions: 81.25"L x 58"W x 45.75"H
• Weight Limit: 600 Pounds

2. Safety Information

Please read all instructions carefully before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• Keep all small parts and packaging materials away from children.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not use power tools for assembly unless specifically instructed, as this may overtighten or damage components.
• Do not stand on the bed frame.
• Distribute weight evenly across the bed. The maximum weight limit is 600 pounds.
• Avoid placing the bed near heat sources or direct sunlight to prevent material degradation.

Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

3. Setup and Assembly

Assembly is required for this product. It is recommended that two adults assemble the bed. Clear a spacious area for assembly and lay out all components on a soft, clean surface to prevent scratches.

3.1. Package Contents

Verify that all parts are present before beginning assembly. Refer to the included parts list in your physical manual for detailed component identification.

• Headboard
• Footboard
• Side Rails (2)
• Center Support Rail
• Slats and Slat Supports
• Hardware Pack (bolts, washers, nuts, Allen wrench)

3.2. Assembly Steps

1. Attach Side Rails to Headboard: Align the side rails with the pre-drilled holes on the headboard. Insert bolts and tighten them securely using the provided Allen wrench. Do not overtighten.
2. Attach Side Rails to Footboard: Repeat the process from step 1 to attach the other end of the side rails to the footboard. Ensure the bed frame is square and stable.
3. Install Center Support Rail: Position the center support rail between the headboard and footboard, attaching it to the designated brackets. Secure with bolts.
4. Place Slats: Evenly space the wooden slats across the side rails and center support rail. Secure each slat to the frame using the provided screws. Ensure all slats are firmly attached to provide adequate mattress support.
5. Final Check: Once all components are assembled, double-check that all bolts and screws are tightened.

Image 3.1: Diagram illustrating the structural components and dimensions of the bed frame, including headboard, footboard, side rails, and slat system.

4. Operating Instructions

This bed frame is designed to support a full-size mattress. No box spring is required due to the slat support system, but it can be used if desired for additional height or support.

4.1. Mattress Placement

• Carefully place your full-size mattress onto the assembled slat system.
• Ensure the mattress is centered on the frame.

4.2. Weight Distribution

To ensure the longevity of the bed frame, distribute weight evenly. Avoid concentrating heavy loads on a single point.

5. Care and Maintenance

Proper care and maintenance will extend the life and appearance of your Coaster Dorian Panel Bed.

5.1. Upholstery Care (Faux Leather)

• Cleaning Code: X - This code indicates that the fabric should only be cleaned by vacuuming or light brushing. Do not use water or solvent-based cleaners.
• For general cleaning, gently vacuum the upholstery with a soft brush attachment to remove dust and debris.
• For spills, immediately blot with a clean, dry cloth. Do not rub, as this can spread the stain.
• Avoid harsh chemicals, abrasive cleaners, or direct sunlight, which can damage the faux leather.

5.2. Frame Care

• Wipe the wooden and metal components with a soft, damp cloth. Dry immediately.
• Periodically check all bolts and screws and re-tighten them to ensure stability.

6. Troubleshooting

If you encounter any issues with your bed, refer to the following common problems and solutions:

If the problem persists, please contact Coaster Fine Furniture customer support.

7. Product Specifications

8. Warranty Information

This Coaster Fine Furniture product comes with a limited warranty. For specific details regarding coverage, duration, and claims process, please refer to the warranty card included with your purchase or visit the official Coaster Fine Furniture website.

Typical limited warranties cover manufacturing defects in materials and workmanship under normal use. Damage resulting from improper assembly, misuse, abuse, or accidents is generally not covered.

9. Customer Support

For assistance with assembly, missing parts, or any other inquiries, please contact Coaster Fine Furniture customer support:

• Website: Visit the Coaster Fine Furniture Support Page for FAQs and contact options.
• Phone: Refer to your product packaging or the official website for the most current customer service phone number.
• When contacting support, please have your model number (300762F) and proof of purchase readily available.