SLLEA AC/DC Adapter User Manual

1. Product Overview

The SLLEA AC/DC Adapter is designed to provide reliable power to your compatible Sony Bluetooth Wireless Stereo Headsets, including models DR-BT140Q and DR-BT160AS. This adapter allows you to operate your device or charge its battery from any standard electrical power outlet, making it ideal for use at home, in the office, or while traveling.

Its lightweight and portable design ensures convenience and ease of use.

Figure 1: The SLLEA AC/DC Adapter, showing the main power brick, integrated power cord, and the device connector.

Figure 2: Side profile of the SLLEA AC/DC Adapter, highlighting its compact design and ventilation grooves.

Figure 3: The SLLEA AC/DC Adapter, illustrating the specific barrel connector type for compatible devices.

2. Important Safety Information and Notices

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Compatibility Check: Before purchasing and using, ensure that the output voltage, current, and plug size of this adapter are compatible with your specific device model. Refer to your device's manual for power requirements.
• Ventilation: If using this item for an extended period, ensure it is placed in a well-ventilated area to prevent overheating. Do not cover the adapter during operation.
• Placement: Do not place the adapter on skin products or other materials that may impede ventilation or cause damage.
• Environmental Conditions: Keep the adapter away from water, excessive heat, and direct sunlight. Use only in dry, indoor environments.
• Protection Features: This adapter is designed with Over Voltage Protection and Over Heat Protection to safeguard both the adapter and your connected device.
• Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

3. Setup

Setting up your SLLEA AC/DC Adapter is straightforward. Follow these steps to connect it to your device and a power source:

1. Verify Compatibility: Double-check that the adapter's connector matches the charging port of your Sony DR-BT140Q or DR-BT160AS headset.
2. Connect to Device: Carefully insert the adapter's output plug into the charging port of your Sony Bluetooth headset. Ensure a firm and secure connection.
3. Connect to Power Outlet: Plug the adapter's AC prongs into a standard electrical wall outlet (100-240VAC, 50/60Hz).
4. Power On: Once connected, your device should begin charging or receive power. Refer to your headset's manual for indicators of charging status.

4. Operating Instructions

The SLLEA AC/DC Adapter operates automatically once connected to a power source and your compatible device. It provides a stable power supply for continuous operation or efficient battery charging.

• Charging: When connected, the adapter will charge your headset's battery. The charging time will vary depending on the battery's current charge level and capacity.
• Direct Power: If your headset supports it, the adapter can also power the device directly, allowing you to use it even when the battery is depleted or removed.
• Disconnecting: To disconnect, first unplug the adapter from the wall outlet, then gently remove the connector from your device.

5. Maintenance

Proper care and maintenance will extend the life of your SLLEA AC/DC Adapter:

• Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly winding the cable to prevent damage.
• Handling: Do not drop, disassemble, or attempt to repair the adapter yourself. This will void the warranty and could pose a safety risk.
• Ventilation: Always ensure adequate ventilation around the adapter during use. Do not operate it in enclosed spaces or on soft surfaces that could block airflow.

6. Troubleshooting

If you encounter issues with your SLLEA AC/DC Adapter, try the following steps:

If the problem persists after trying these solutions, please contact SLLEA customer support for assistance.

7. Specifications

8. Warranty and Support

SLLEA is committed to providing high-quality products and customer satisfaction.

• Warranty: This product comes with a 30 Days Money Back Guarantee, 60 Days Free Exchange With Paid Return Label, and a 701 Days Anytime Worry-Free Warranty.
• Customer Support: If you have any questions, concerns, or require assistance with your SLLEA AC/DC Adapter, please do not hesitate to contact SLLEA customer service. We are here to help.
• Online Resources: For more information about SLLEA products, visit the official SLLEA store on Amazon: SLLEA Amazon Store.