Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your EinCar Double Din Car Stereo. Please read this manual thoroughly before using the product to ensure proper functionality and safety. This system integrates GPS navigation, DVD playback, Bluetooth connectivity, and various multimedia features to enhance your driving experience.
Product Features
- High quality digital stereo FM/AM tuner (RDS) with automatic/semi-automatic station search.
- Support for RCA AV connector type rear view camera signal input, with automatic switching to parking image when reverse gear is engaged. A backup camera is included.
- 6.2" LCD capacitive 5-point touch screen display with 7-color button backlight for crisp images and rapid touch response.
- Bluetooth connectivity for hands-free phone calls and music streaming from smartphones.
- Steering Wheel Control compatibility (does not support CANBUS function).
- USB inputs for connection to digital devices such as flash drives and portable media players.
- Dual TF Card ports: one for map data (8 GB Map Card included) and another for entertainment.
- Supports 1080P video playback.
- Wireless remote control included.
- Multi-language support and customizable car logo display.
Package Contents
Upon opening the package, verify that all components are present and in good condition. The standard package for your EinCar Double Din Car Stereo includes:
- EinCar Double Din Car Stereo Unit
- Power Wiring Harness
- GPS Antenna
- USB Cable
- Remote Control
- Mounting Brackets and Screws
- User Manual (this document)
- Backup Camera (included as a gift)
- 8GB TF Map Card (pre-inserted in one of the TF card slots)
For a visual overview of the package contents, please refer to the official unboxing video provided by the seller:
Setup and Installation
Professional installation is recommended for optimal performance and safety. Ensure the vehicle's battery is disconnected before beginning installation.
1. Pre-Installation Check
- Verify the unit's dimensions (L 178mm x H 100mm) fit your car's dashboard opening.
- Ensure all necessary wiring harnesses and accessories are available.
2. Wiring Connections
Connect the main power harness to your vehicle's wiring. Pay close attention to the following specific connections:
- Power (Yellow): Constant 12V power.
- Accessory (Red): Switched 12V power (ignition).
- Ground (Black): Connect to a secure chassis ground point.
- Reverse (Pink): Connect this wire from the unit's harness to the vehicle's reverse light wire. This enables automatic display of the backup camera when reverse gear is engaged.
- Parking Brake (Green): For safety, this wire typically requires connection to the parking brake circuit. To enable video playback while the vehicle is in motion (for passenger viewing only), this wire can be connected to a ground source (e.g., a screw on the radio chassis). Note: Check local laws regarding video playback while driving.
- Speaker Wires: Connect according to the provided wiring diagram, ensuring correct polarity for each speaker.
3. GPS Antenna Installation
Mount the GPS antenna in a location with a clear view of the sky, such as on the dashboard or under the windshield, away from metal obstructions that could interfere with the signal.
4. Backup Camera Installation
Install the backup camera at the rear of your vehicle. Connect the camera's video output (yellow RCA) to the unit's camera input. The camera's power wire should be connected to the vehicle's reverse light power, and its ground wire to a chassis ground. Ensure the small red wire protruding from the RCA cable near the camera end is also connected to the reverse light power, and the red wire near the head unit end is connected to the unit's "Reverse (Pink)" wire.
Operating Instructions
1. Power On/Off
Press the POWER button on the front panel to turn the unit on or off. The unit will typically power on automatically with the vehicle's ignition.
2. Radio Operation
Press the RADIO button to enter FM/AM mode. Use the touch screen controls to scan for stations, save presets, and adjust settings like LOC (Local/Distant) and EQ (Equalizer).
3. Bluetooth Connectivity
Press the BT button to access the Bluetooth menu. Enable Bluetooth on your smartphone and search for "CarBT" (or similar name). The default pairing PIN is 0000. Once paired, you can make/receive hands-free calls and stream audio.
4. DVD/CD Playback
Insert a DVD or CD into the disc slot. The unit will automatically switch to DVD mode and begin playback. Use the on-screen controls for playback functions (play, pause, skip, etc.).
5. GPS Navigation
Press the MAP button to launch the GPS navigation software. The pre-installed 8GB map card contains regional map data. Follow the on-screen prompts to set destinations, view routes, and access navigation settings. Ensure the GPS antenna is properly installed for accurate positioning.
6. USB and SD Card Playback
Insert a USB flash drive into the USB port or an SD card into the designated slot. The unit will detect compatible media files (audio, video, images) and allow you to browse and play them through the respective media player interfaces.
7. Steering Wheel Control (SWC)
If your vehicle supports analog steering wheel controls, connect the SWC wires from the unit's harness to your vehicle's SWC wires. Access the "Steering Wheel Control" settings in the unit's menu to program the buttons. This unit does not support CANBUS systems.
8. Calendar Function
Access the calendar function from the main menu to view the current date and time. Time settings can usually be adjusted within the system's general settings.
Maintenance
- Screen Cleaning: Use a soft, lint-free cloth to gently wipe the touchscreen. For stubborn smudges, slightly dampen the cloth with water or a screen-safe cleaner. Avoid abrasive materials or harsh chemicals.
- Disc Care: Handle DVDs and CDs by their edges. Keep them clean and free of scratches to ensure smooth playback.
- Software Updates: Periodically check the manufacturer's website for any available software or map updates to ensure optimal performance and up-to-date navigation data.
- General Cleaning: Keep the unit's exterior free of dust and debris. Ensure ventilation slots are not blocked.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Incorrect wiring; Blown fuse; Vehicle ignition off. | Check power and ground connections. Inspect vehicle's fuse box and unit's inline fuse. Ensure ignition is on. |
| No sound from speakers. | Speaker wires incorrectly connected; Volume too low; Mute activated. | Verify speaker wiring polarity and connections. Increase volume. Check if mute function is active. |
| Backup camera not displaying. | Reverse trigger wire not connected; Camera power issue; Incorrect video input. | Ensure the unit's "Reverse (Pink)" wire is connected to the vehicle's reverse light circuit. Verify camera power and ground. Check RCA video cable connection. |
| GPS signal lost or inaccurate. | GPS antenna obstructed or improperly placed; Map data outdated. | Relocate GPS antenna to a clear area. Check antenna connection. Update map data if available. |
| Bluetooth pairing issues. | Incorrect PIN; Device not in pairing mode; Interference. | Ensure correct PIN (0000). Put phone in pairing mode. Restart both devices. |
| Touch screen unresponsive or inaccurate. | Software glitch; Screen calibration needed. | Perform a system reset (refer to manual for reset button location, usually a small pinhole). Calibrate the touchscreen via settings if available. |
Specifications
- Product Dimensions: 6.69 x 9.45 x 11.02 inches
- Item Weight: 4.84 pounds
- Model Number: aTT.1W.6032GNN+FCAM1
- Wireless Communication: Bluetooth
- GPS: GPS Enabled
- Display Resolution: 1024x600
- Screen Size: 6.2 Inches
- Display Type: LCD
- Human Interface Input: Touchscreen, Microphone, Buttons
- Media Type Support: SD, USB, DVD/CD
- Manufacturer: EGood CO., LTD.
- Color: 3 UIs 7 Color Buttons Car DVD GPS Stereo + Camera
Warranty and Support
For warranty information, technical support, or service inquiries, please contact EinCar customer service through the retailer where the product was purchased or visit the official EinCar website. Please have your model number (aTT.1W.6032GNN+FCAM1) and purchase details ready when contacting support.
For additional resources and frequently asked questions, you may visit the manufacturer's support page or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.