Creative 5390660192135

Creative Pebble 2.0 USB-Powered Desktop Speakers

Instruction Manual

Introduction

The Creative Pebble 2.0 USB-Powered Desktop Speakers are designed to provide clear and immersive audio for your PC or laptop. Featuring custom-tuned far-field drivers and passive radiators, these speakers deliver excellent audio quality with enhanced bass reproduction. Their compact and modern design makes them suitable for any home, office, or workspace setup.

Creative Pebble 2.0 USB-Powered Desktop Speakers in white

Image: Creative Pebble 2.0 USB-Powered Desktop Speakers (White).

Setup Guide

Setting up your Creative Pebble 2.0 speakers is straightforward. Follow these steps for optimal connection:

Power Connection: Connect the USB cable from the speakers to an available USB port on your computer or laptop. For optimal performance and maximum volume, it is recommended to connect the speakers to a 5V 2A USB-A power adapter (not included) or a 10W USB-C port/adapter if available, as some computer USB ports may not provide sufficient power.
Audio Connection: Plug the 3.5mm AUX cable into the headphone jack or line-out port of your computer, laptop, or other audio source. Ensure the connection is secure.
Placement: Position the speakers on your desk or desired surface. The 45° elevated drivers are designed to project sound directly towards you for an immersive personal listening experience.

Creative Pebble 2.0 speakers set up next to a computer monitor

Image: Creative Pebble 2.0 speakers positioned on a desk next to a computer monitor, demonstrating typical setup.

Creative Pebble 2.0 speakers showing 45 degree elevated drivers

Image: A pair of Creative Pebble speakers highlighting their 45-degree elevated drivers, optimized for personal listening.

Operating Instructions

Power On/Off and Volume Control: The main speaker features a conveniently located rotary knob on the front. Rotate this knob clockwise to turn the speakers on and increase the volume. Rotate counter-clockwise to decrease the volume and turn the speakers off.
Audio Projection: The unique 45° elevated drivers are designed to direct sound upwards and towards your ears, providing a more immersive and personal listening experience, especially when placed on a desktop.
Passive Radiators: The rear-facing passive radiators enhance bass reproduction. For optimal bass performance, experiment with placing the back of the speakers a few inches away from a wall or solid surface to allow the passive radiators to function effectively.

Close-up of Creative Pebble 2.0 speaker volume knob

Image: Close-up view of the volume control knob on the Creative Pebble 2.0 speaker, indicating easy access for adjustments.

Creative Pebble 2.0 speakers showing passive radiators on the back

Image: Rear view of the Creative Pebble 2.0 speakers, highlighting the passive radiators designed for enhanced bass.

Maintenance and Care

Cleaning: Use a soft, dry cloth to clean the exterior of the speakers. Avoid using abrasive cleaners, solvents, or strong chemicals, as these can damage the finish.
Handling: Handle the speakers with care. The passive radiators on the back are delicate; avoid pressing on them or poking holes in the rubber ring, as this can impair their function.
Storage: When not in use for extended periods, store the speakers in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Problem	Possible Cause	Solution
No sound or low volume	Volume knob is too low. Audio cable not fully connected. Insufficient power from USB port. Computer audio settings incorrect.	Increase volume using the knob on the speaker and your computer. Ensure the 3.5mm AUX cable is securely plugged into both the speakers and the audio source. Try connecting the USB power cable to a dedicated 5V 2A USB-A power adapter or a 10W USB-C port for maximum output. Check your computer's sound output settings to ensure the correct device is selected.
Sound distortion	Volume set too high. Input audio source is distorted.	Reduce the volume on both the speakers and your audio source. Test with a different audio source or file to rule out source issues.
Speakers not recognized by computer	Loose USB connection. Driver issues (rare for plug-and-play).	Ensure the USB power cable is firmly connected. Try a different USB port. Restart your computer.

Product Specifications

Feature	Detail
Brand	Creative
Model Name	Pebble 2.0
Item Model Number	5390660192135
Speaker Type	Computer
Connectivity Technology	Wired (USB for power, 3.5mm AUX for audio)
Audio Output Mode	Stereo (2.0 Channel)
Speaker Maximum Output Power	4.4 Watts (RMS)
Frequency Response	100 Hz - 17,000 Hz
Signal-to-Noise Ratio	86 dB
Input Voltage	5 Volts
Product Dimensions	4.57"D x 4.8"W x 4.53"H (per speaker)
Item Weight	1.4 Pounds
Color	White

Creative Pebble 2.0 speaker with 4.4 inches dimension indicated

Image: Creative Pebble 2.0 speaker illustrating its compact 4.4-inch width, ideal for small desk spaces.

Warranty Information

The Creative Pebble 2.0 USB-Powered Desktop Speakers come with a Limited Warranty. For detailed information regarding the terms, conditions, and duration of your warranty, please refer to the official Creative website or the warranty card included with your product. Retain your proof of purchase for warranty claims.

Support and Resources

For further assistance, updated drivers, FAQs, or to access the full user guide, please visit the official Creative support channels:

Official User Guide (PDF): Download User Guide
Creative Support Website: creative.com/qr/pebble
Creative Brand Store: Visit Creative Store on Amazon

For direct customer support, please refer to the contact information provided in your product packaging or on the official Creative website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.