1. Introduction
This manual provides comprehensive instructions for the LKPower AC Adapter, model 180115046. This adapter is specifically designed to supply power to or charge the battery of your SPRACHT WS-4010 Aura BluNote A2DP Bluetooth Speaker. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your device.
The LKPower AC adapter converts standard AC electrical power from wall outlets into the DC power required by your compatible device. It is engineered with quality materials and tested to meet the necessary power requirements.
2. Product Overview
The LKPower AC Adapter is a replacement power supply unit featuring a compact design for portability and ease of use. It is designed to provide reliable power to your SPRACHT WS-4010 Aura BluNote Speaker.
Key Features:
- High-quality replacement AC wall power charger adapter.
- Wide input voltage range: AC 100-240V 50/61Hz (suitable for worldwide use).
- Incorporates over-voltage protection to safeguard your device.
- Includes over-heat protection for safe operation.
- Tested units ensure reliable performance.
Product Components:



3. Setup
- Verify Compatibility: Ensure that your SPRACHT WS-4010 Aura BluNote Speaker requires an AC adapter with the specifications provided by this LKPower adapter (Model 180115046).
- Connect to Device: Insert the barrel connector of the LKPower AC Adapter's output cable into the DC input port of your SPRACHT WS-4010 Aura BluNote Speaker. Ensure a secure connection.
- Connect to Power Outlet: Plug the two-prong AC plug of the adapter into a standard electrical wall outlet (AC 100-240V, 50/60Hz).
- Power On: Once connected, your speaker should begin to receive power or charge its internal battery, depending on its design.

4. Operating Instructions
Once the LKPower AC Adapter is properly connected to both the power outlet and your SPRACHT WS-4010 Aura BluNote Speaker, it will automatically begin to supply power. No further user interaction is typically required for the adapter itself.
- Use the adapter to power your speaker directly from an electrical outlet.
- If your speaker has a rechargeable battery, the adapter will charge the battery while connected and powered.
- Always ensure the adapter is plugged into a functional power outlet.
5. Maintenance
To ensure the longevity and optimal performance of your LKPower AC Adapter, follow these simple maintenance guidelines:
- Cleaning: Disconnect the adapter from both the power outlet and your device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
- Handling: Avoid dropping the adapter or subjecting it to strong impacts. Do not pull the cable to unplug the adapter from the wall; always grasp the plug itself.
- Inspection: Periodically inspect the cable and connectors for any signs of wear, fraying, or damage. If any damage is observed, discontinue use immediately and replace the adapter.
6. Troubleshooting
If you encounter issues with your LKPower AC Adapter, please refer to the following troubleshooting steps:
- No Power to Device:
- Ensure the adapter is securely plugged into a working wall outlet. Test the outlet with another device.
- Verify the barrel connector is fully inserted into your speaker's DC input port.
- Check the adapter's cable for any visible damage or kinks.
- Confirm that your speaker is powered on and functioning correctly with its original power source (if available).
- Adapter Feels Hot:
- It is normal for AC adapters to become warm during operation. However, if the adapter is excessively hot to the touch, disconnect it immediately.
- Ensure the adapter is in a well-ventilated area and not covered by anything that could trap heat.
- Verify that the adapter's specifications match your device's power requirements to avoid overloading.
- Intermittent Power:
- Check all connections for looseness.
- Inspect the cable for internal breaks by gently flexing it while the device is connected (exercise caution).
If these steps do not resolve the issue, please contact customer support for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | LKPower |
| Model Number | 180115046 |
| Input Voltage | AC 100-240V |
| Input Frequency | 50/60Hz |
| Compatible Devices | SPRACHT WS-4010 Aura BluNote A2DP Bluetooth Speaker |
| Power Source | Corded Electric |
| Main Power Connector Type | 2 Pin (US Standard) |
| Cable Length | Approximately 76 inches (193 cm) |
| Special Features | Over Voltage Protection, Over Heat Protection |
Note: Specifications are subject to change without notice.
8. Warranty and Support
For warranty information or technical support regarding your LKPower AC Adapter, please refer to the documentation provided with your purchase or contact the manufacturer directly. Ensure you have your model number (180115046) and purchase details available when seeking support.
Manufacturer: LKPower