Manuals+

LKPower 180115835

LKPower AC Adapter for Trimble TDS Nomad Series - Instruction Manual

Model: 180115835

1. Introduction

Thank you for choosing the LKPower AC Adapter. This power supply is designed to provide reliable power to your Trimble TDS Nomad N324, 800B, 900B, EGL-SYN3GEB-SG, and 800GLC Collector devices, allowing you to operate your device or charge its battery from standard electrical outlets. Our adapters are manufactured with high-quality materials and tested to ensure compatibility and performance.

Key Features:

  • High-quality replacement AC wall power charger adapter.
  • Input: AC 100-240V 50/61Hz Auto (Worldwide AC Input).
  • Built-in Over Voltage Protection and Over Heat Protection.
  • Tested units in great working condition.

2. Safety Information

Please read and follow these safety instructions carefully to prevent injury or damage to your device and adapter:

  • Use the adapter only with compatible devices as specified.
  • Do not expose the adapter to water, rain, or excessive moisture.
  • Avoid using the adapter in extremely hot or cold environments.
  • Do not disassemble, modify, or attempt to repair the adapter. Refer servicing to qualified personnel.
  • Ensure the power outlet is easily accessible and unplug the adapter during lightning storms or when unused for long periods.
  • Do not place heavy objects on the power cord or adapter.
  • Keep out of reach of children.

3. Package Contents

Your LKPower AC Adapter package typically includes the following components:

  • 1 x LKPower AC Adapter Unit
  • 1 x AC Power Cord
LKPower AC Adapter Unit

Image 3.1: LKPower AC Adapter Unit. This image shows the main adapter block with its output cable.

AC Power Cord

Image 3.2: AC Power Cord. This image displays the detachable power cord that connects the adapter to the wall outlet.

4. Setup Instructions

Follow these steps to properly set up your AC adapter:

  1. Connect the AC Power Cord: Take the AC power cord and connect its female end firmly into the input port of the LKPower AC Adapter unit.
  2. Connect to Device: Plug the output connector (barrel connector) of the AC adapter into the power input port of your Trimble TDS Nomad device. Ensure a secure connection.
  3. Connect to Power Outlet: Insert the two-prong plug of the AC power cord into a standard wall electrical outlet (AC 100-240V).
  4. Verify Connection: Once connected, the adapter's indicator light (if present) should illuminate, and your device should begin charging or power on.
AC Adapter connected to device and power outlet

Image 4.1: Adapter in Use. This image illustrates the AC adapter connected to a wall outlet and a device, demonstrating a typical setup.

5. Operating Instructions

Once properly set up, the LKPower AC Adapter operates automatically:

  • Powering the Device: The adapter will supply continuous power to your Trimble TDS Nomad device when connected to a live electrical outlet.
  • Charging the Battery: If your device has a rechargeable battery, the adapter will charge it while simultaneously powering the device. The charging status will typically be indicated by your device's own battery indicator.
  • Disconnection: To disconnect, first unplug the adapter from the wall outlet, then disconnect it from your device.

6. Maintenance

Proper care and maintenance will extend the life of your AC adapter:

  • Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the adapter and cables. Do not use liquid cleaners or aerosols.
  • Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly winding the cables to prevent damage.
  • Inspection: Periodically inspect the adapter and cables for any signs of damage, such as frayed wires, bent pins, or cracked casing. If damage is found, discontinue use immediately and replace the adapter.

7. Troubleshooting

If you encounter issues with your LKPower AC Adapter, refer to the following common troubleshooting steps:

Problem Possible Cause Solution
Device not powering on or charging.
  • No power from outlet.
  • Loose connection.
  • Damaged adapter or cable.
  • Incompatible device.
  • Test the outlet with another device.
  • Ensure all connections (wall, adapter, device) are secure.
  • Inspect adapter and cables for visible damage. Replace if damaged.
  • Verify adapter compatibility with your device model.
Adapter feels excessively hot.
  • Poor ventilation.
  • Overload or internal fault.
  • Ensure the adapter is in a well-ventilated area.
  • Disconnect immediately. Do not use if it remains excessively hot.
Indicator light not on.
  • No power from outlet.
  • Adapter fault.
  • Check wall outlet.
  • If outlet is working, the adapter may be faulty and needs replacement.

If the problem persists after trying these steps, please contact customer support.

8. Specifications

Detailed technical specifications for the LKPower AC Adapter (Model: 180115835):

Brand LKPower
Model Number 180115835
Input Voltage AC 100-240V
Frequency Range 50/61Hz (Auto)
Power Source Corded Electric
Connector Type Barrel Connector
Main Power Connector Type 2 Pin (US Standard)
Compatible Devices Trimble TDS Nomad N324, 800B, 900B, EGL-SYN3GEB-SG, 800GLC Collector
Special Feature Travel-friendly design, Over Voltage Protection, Over Heat Protection
AC Adapter dimensions and cable length

Image 8.1: Adapter Dimensions. This image provides detailed measurements for the adapter unit and its cables, including cable length (127.8 inch total), adapter dimensions (4.2 inch length), and plug dimensions.

9. Warranty and Support

LKPower products are designed for reliability and performance. While specific warranty details are not provided in this manual, most LKPower products come with a standard manufacturer's warranty covering defects in materials and workmanship.

For warranty claims, technical support, or any questions regarding your LKPower AC Adapter, please contact the retailer where you purchased the product or visit the official LKPower website for customer service contact information.

Please have your product model number (180115835) and purchase information ready when contacting support.