Tecnolite HLED-202/30/N

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Tecnolite HLED-202/30/N Outdoor LED Wall Sconce Instruction Manual

Model: HLED-202/30/N

1. Introduction

Thank you for choosing the Tecnolite HLED-202/30/N Outdoor LED Wall Sconce. This manual provides essential information for the safe installation, operation, and maintenance of your new luminaire. Please read these instructions carefully before installation and retain them for future reference.

2. Safety Information

  • Electrical Safety: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply is disconnected at the circuit breaker before installation, maintenance, or cleaning.
  • Product Integrity: Do not modify or alter the luminaire. Any modifications may void the warranty and create safety hazards.
  • Outdoor Use: This luminaire is designed for both indoor and outdoor use with an IP55 rating, providing protection against limited dust ingress and low-pressure water jets. Ensure all connections are properly sealed to maintain this rating.
  • Handling: Handle the product with care to avoid damage to the integrated LED components or glass.

3. Package Contents

Verify that all components are present before beginning installation:

  • 1 x Tecnolite HLED-202/30/N Luminaire
  • 1 x Instruction Manual

4. Setup and Installation

This luminaire is designed for wall mounting and requires a wired electrical connection. Professional installation is highly recommended.

  1. Preparation: Turn off the main power supply at the circuit breaker before starting any electrical work.
  2. Mounting Location: Select a suitable wall location that can support the weight of the fixture (approximately 1.9 kg) and allows for proper wiring.
  3. Mounting the Bracket: Secure the mounting bracket to the wall using appropriate screws and anchors (not included, typically supplied by the installer based on wall type). Ensure the bracket is level and firmly attached.
  4. Wiring: Connect the luminaire's electrical wires to your household wiring. Follow standard electrical color codes: Live (usually black or brown), Neutral (usually white or blue), and Ground (usually green/yellow or bare copper). Ensure all connections are secure and insulated with wire nuts or appropriate connectors.
  5. Attaching the Fixture: Carefully attach the luminaire body to the mounting bracket, ensuring all wires are tucked safely inside the junction box and not pinched. Secure the fixture with the provided screws or fasteners.
  6. Final Check: Once the luminaire is securely mounted and wired, restore power at the circuit breaker.
Diagram showing the dimensions of the Tecnolite HLED-202/30/N wall sconce, with a height of 330mm and width of 130mm.

Image 1: Product dimensions. The sconce measures 330mm (13 inches) in height and 130mm (5.1 inches) in width.

Graphic indicating 'Choose with Integrated LED' with an illustration of an integrated LED light fixture.

Image 2: This fixture features an integrated LED light source, meaning the LED components are built directly into the unit and are not designed to be replaced by the user.

5. Operating Instructions

The Tecnolite HLED-202/30/N wall sconce operates via a standard wall switch connected to its electrical circuit. There is no integrated switch on the fixture itself.

  • Turning On/Off: Use the connected wall switch to turn the luminaire on or off.
  • Light Output: The integrated LED provides a warm soft light, ideal for creating an inviting ambiance in outdoor or indoor spaces.
Tecnolite HLED-202/30/N wall sconce installed on an outdoor patio wall, illuminating the area with warm light.

Image 3: The Tecnolite HLED-202/30/N sconce provides ambient lighting for outdoor living spaces.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your luminaire.

  • Cleaning: Disconnect power before cleaning. Use a soft, damp cloth to wipe the exterior of the fixture. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or LED components.
  • Inspection: Periodically inspect the luminaire for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician.
  • LED Care: The integrated LED is designed for long life and does not require bulb replacement. Do not attempt to open the sealed LED compartment.

7. Troubleshooting

If you encounter issues with your luminaire, refer to the following common troubleshooting steps:

ProblemPossible CauseSolution
Luminaire does not turn onNo power supply
Loose wiring connection
Faulty wall switch
Check circuit breaker and wall switch. Ensure power is restored. Verify all wiring connections are secure (consult an electrician if unsure). Test the wall switch.
Light is dim or flickersIncorrect voltage
Loose connection
Damaged LED driver
Verify the luminaire is receiving the correct voltage (127V). Check wiring connections. If the problem persists, the integrated LED driver may be faulty; contact support.
Water inside the fixtureImproper sealing during installation
Damage to the fixture
Immediately disconnect power. Inspect all seals and connections for proper installation. If damage is present, the fixture may need replacement. Ensure proper sealing for IP55 rating.

If these steps do not resolve the issue, please contact Tecnolite customer support.

8. Specifications

FeatureDetail
Model NumberHLED-202/30/N
BrandTecnolite
ManufacturerTECNOLITE
ColorBlack
StyleVintage
FinishPainted
Power SourceWired Electric
Voltage127 Volts
Wattage4 Watts (Integrated LED)
Luminous Flux800 Lumens
Light ColorWarm Soft Light
Bulb TypeIntegrated LED
Installation MethodWall Mount
IP RatingIP55 (Protected against limited dust ingress and low-pressure water jets)
UsageIndoor and Outdoor
Dimensions (L x W x H)13 x 13 x 33 cm (5.1 x 5.1 x 13 inches)
Weight1.9 Kilograms
Batteries RequiredNo

9. Warranty and Support

Tecnolite offers a warranty for its products. This LED product comes with:

  • Warranty: Up to 5 years warranty on LED products. Please refer to your purchase documentation or the official Tecnolite website for specific terms and conditions.
Graphic indicating 'Up to 5 Years Warranty on LED Products'.

Image 4: Tecnolite provides up to a 5-year warranty on its LED products, ensuring quality and reliability.

For technical support, warranty claims, or further assistance, please visit the official Tecnolite store or contact their customer service:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.