Redline Original Remote Control User Manual

Introduction

This manual provides detailed instructions for the Redline original remote control, designed for seamless operation with various Redline TS series satellite receivers and compatible televisions. Please read this manual thoroughly to ensure proper setup and optimal performance of your remote control.

Image 1: The Redline Original Remote Control. This image displays the full remote control, featuring a black body with various function buttons, a central navigation pad with an 'OK' button, and numerical keys. The Redline logo is visible at the bottom.

Setup

1. Battery Installation

The Redline remote control requires two AAA batteries (not included). Follow these steps to install them:

1. Locate the battery compartment cover on the back of the remote control.
2. Press down on the tab and slide the cover off.
3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Slide the battery compartment cover back into place until it clicks securely.

Note: Always use new batteries and replace both batteries at the same time. Do not mix old and new batteries or different types of batteries.

2. Initial Use

This remote control operates using infrared (IR) technology. No pairing is required for the Redline receiver. Simply point the remote control directly at your Redline receiver or compatible television to operate it.

3. TV Programming (If Applicable)

This remote control is programmable for TV control. Refer to the specific instructions provided with your Redline receiver or the remote control's packaging for details on how to program the 'TV CONTROL' section buttons for your television model. This typically involves entering a code or using an auto-search function.

Operating Instructions

Familiarize yourself with the various buttons and their functions:

• Power Button (●): Turns the receiver or TV on/off.
• Numerical Buttons (0-9): Used to directly enter channel numbers or other numerical inputs.
• SAT Button: Switches between satellite modes or inputs.
• TV/Radio Button: Toggles between TV and Radio channels.
• MENU Button: Accesses the main menu of the receiver.
• OK Button: Confirms selections or displays channel information.
• Navigation Buttons (Up, Down, Left, Right): Navigates through menus and lists.
• VOL +/- Buttons: Adjusts the volume level.
• CH +/- Buttons: Changes the channel up or down.
• INFO Button: Displays program information.
• EPG Button: Accesses the Electronic Program Guide.
• TXT Button: Opens Teletext (if available).
• AUDIO Button: Selects audio tracks or languages.
• SUBTL Button: Activates or deactivates subtitles.
• RECALL Button: Switches to the previously viewed channel.
• FAV Button: Accesses your list of favorite channels.
• IPTV Button: Directly accesses IPTV functions (if supported by your receiver).
• EXIT Button: Exits current menu or screen.
• Media Control Buttons (<<, <, ||, >, >>, SLOW): Controls media playback functions such as rewind, play/pause, fast forward, next track, previous track, and slow motion.
• TV CONTROL Section (VOL+, VOL-, AV, OK, ^, v, <, >, Power): These buttons are designed to control a paired television. Their functionality depends on successful TV programming.

For specific functions related to your Redline receiver model, refer to your receiver's user manual.

Maintenance

Cleaning the Remote Control

To clean your remote control, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Do not use abrasive cleaners, alcohol, or chemical solvents, as these can damage the remote's surface and internal components.

Battery Replacement

Replace batteries when the remote control's response becomes sluggish or stops working. Always replace both batteries simultaneously with new AAA batteries. Dispose of used batteries according to local regulations.

Troubleshooting

• Remote control not responding:
  • Check if the batteries are inserted correctly with the correct polarity.
  • Replace old batteries with new ones.
  • Ensure there are no obstructions between the remote control and the receiver/TV.
  • Make sure you are within the operating range (up to 10 meters).
  • Point the remote control directly at the IR sensor of your device.
• Some buttons not working:
  • Clean the remote control, especially around the non-working buttons, to remove any dirt or debris that might be preventing contact.
  • If only TV control buttons are not working, ensure the remote is correctly programmed or compatible with your specific TV model. Refer to the 'TV Programming' section.

Specifications

Warranty and Support

Specific warranty information for this product is typically provided at the point of purchase or with the original product packaging. For technical support or warranty claims, please contact your retailer or the official Redline customer service channels.