1. Introduction
Thank you for purchasing the Z-Lite 426-1S-CH Willow 1-Light Wall Sconce. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image 1.1: Z-Lite 426-1S-CH Willow 1-Light Wall Sconce in Silver finish. The fixture features a rectangular backplate, a horizontal arm, and a cylindrical clear glass shade enclosing a white inner diffuser. The overall design is modern and metropolitan.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, and the National Electric Code (NEC).
- Consult a qualified electrician if you are unsure about the installation process.
- This fixture is intended for indoor use only.
- Ensure the fixture is properly grounded.
- Do not exceed the maximum wattage specified for the bulb.
- The fixture is UL Listed, indicating compliance with safety standards.
3. Package Contents
Carefully unpack your fixture and check that all parts are included. Keep all packaging materials until you are sure all parts are present and in good condition.
- Wall Sconce Fixture (1)
- Glass Shade (1)
- Mounting Hardware Kit (includes mounting plate, screws, wire nuts) (1 set)
- Instruction Manual (1)
4. Tools Required (Not Included)
- Phillips Head Screwdriver
- Flat Head Screwdriver
- Wire Strippers
- Electrical Tape
- Pliers
- Safety Glasses
5. Setup and Installation
Follow these steps to install your Z-Lite Willow Wall Sconce:
- Turn off Power: Before starting, ensure the power to the circuit at the main fuse box or circuit breaker is completely off.
- Prepare Mounting Plate: Attach the mounting plate to the junction box using the provided screws. Ensure the plate is securely fastened.
- Wire Connections:
- Connect the black wire from the fixture to the black (Live) wire from the junction box using a wire nut.
- Connect the white wire from the fixture to the white (Neutral) wire from the junction box using a wire nut.
- Connect the green or bare copper ground wire from the fixture to the ground wire from the junction box (or to the green ground screw on the mounting plate) using a wire nut.
- Carefully tuck all wires into the junction box.
- Mount Fixture: Align the fixture's backplate with the mounting plate and secure it with the provided screws.
- Install Bulb: Insert one E26 Medium base bulb (not included) into the socket. Do not exceed the maximum wattage of 100 Watts.
- Attach Glass Shade: Carefully place the glass shade over the bulb and secure it according to the fixture's design (typically by tightening retaining rings or screws).
- Restore Power: Turn the power back on at the main fuse box or circuit breaker.
Image 5.1: Technical line drawing illustrating the dimensions of the Z-Lite Willow Wall Sconce. The fixture measures 8 inches in height, 4.5 inches in width, and extends 6 inches from the wall.
6. Operating Instructions
Once installed, the Z-Lite Willow Wall Sconce operates like any standard wall-mounted light fixture. It is controlled by the wall switch connected to its circuit.
- Turning On/Off: Use the wall switch to turn the light fixture on or off.
- Dimmable Feature: This fixture is dimmable. If connected to a compatible dimmer switch (sold separately), you can adjust the light intensity. Ensure the bulb used is also dimmable.
- Bulb Type: Uses one E26 Medium base bulb. Maximum wattage is 100 Watts. LED bulbs are recommended for energy efficiency.
7. Maintenance
Regular maintenance will help preserve the appearance and functionality of your fixture.
- Cleaning: To clean, wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, polishes, or solvents as they may damage the finish.
- Bulb Replacement: Ensure the power is off and the bulb has cooled before attempting to replace it. Unscrew the old bulb and screw in a new E26 Medium base bulb, not exceeding 100 Watts.
8. Troubleshooting
If your fixture is not operating correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Z-Lite |
| Model Name | 426-1S-CH |
| Collection | Willow |
| Color | Silver (Fixture), Clear (Shade) |
| Material | Alloy Steel (Fixture), Glass (Shade) |
| Style | Metropolitan |
| Fixture Form | Sconce |
| Product Dimensions (L x W x H) | 6" x 4.5" x 8" |
| Item Weight | 1.65 Pounds |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Installation Type | Surface Mount |
| Special Feature | Dimmable |
| Light Source Type | LED Compatible (Bulb not included) |
| Finish Type | Chrome |
| Number of Light Sources | 1 |
| Voltage | 120 Volts |
| Maximum Compatible Wattage | 100 Watts |
| Bulb Base | E26 Medium |
| Specification Met | UL Listed |
10. Warranty and Support
This Z-Lite product is covered by a manufacturer's warranty. Please refer to the warranty documentation included with your purchase or visit the official Z-Lite website for detailed warranty terms and conditions.
For technical support, missing parts, or warranty claims, please contact Z-Lite customer service. Contact information can typically be found on the manufacturer's website or on the product packaging.
