Smartby RMT-AH200U Replacement Remote Control User Manual

1. Introduction

This manual provides comprehensive instructions for the Smartby RMT-AH200U replacement remote control. Designed for ease of use, this remote is compatible with various Sony Sound Bar models, including HT-CT390, SA-CT390, SA-WRT3, SA-WCT390, HT-RT3, HT-RT40, and HT-RT4. No programming is required; simply insert batteries to begin operation.

2. Product Overview

Figure 1: Front view of the Smartby RMT-AH200U replacement remote control.

The Smartby RMT-AH200U remote control is a direct replacement for the original Sony RMT-AH200U, offering full functionality without the need for complex setup. Its ergonomic design ensures comfortable handling.

Key Features:

• No programming required; ready to use with batteries.
• Direct replacement for Sony RMT-AH200U.
• Compatible with various Sony Sound Bar models (HT-CT390, SA-CT390, SA-WRT3, SA-WCT390, HT-RT3, HT-RT40, HT-RT4).
• Comfortable and lightweight design.

3. Setup

Battery Installation:

1. Locate the battery compartment on the back of the remote control.
2. Slide open the battery compartment cover.
3. Insert two (2) AAA alkaline batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Close the battery compartment cover securely.

The remote is now ready for immediate use with your compatible Sony Sound Bar.

4. Operating Instructions

The RMT-AH200U remote control provides access to all essential functions of your Sony Sound Bar. Below is a general guide to common button functions:

Figure 2: Detailed view of the remote control buttons.

• Power Button (⏻): Turns the sound bar on or off.
• INPUT: Selects the audio input source (e.g., TV, HDMI, Bluetooth).
• DIMMER: Adjusts the brightness of the sound bar's display.
• MENU: Accesses the sound bar's menu settings.
• BACK: Returns to the previous menu or setting.
• ENTER: Confirms a selection in the menu.
• Directional Arrows (↑↓←→): Navigates through menu options.
• Volume Up (+): Increases the main volume.
• Volume Down (-): Decreases the main volume.
• Mute (🔇): Mutes or unmutes the sound.
• SW + / SW -: Adjusts the subwoofer volume level.
• CLEAR AUDIO+: Activates or deactivates the Clear Audio+ sound mode.
• VOICE: Enhances dialogue clarity.
• SOUND FIELD: Selects different sound field modes (e.g., Standard, Cinema, Music).
• NIGHT: Activates or deactivates Night Mode for reduced dynamic range.
• Playback Controls (⏮, ⏯, ⏭): Controls media playback (e.g., skip track, play/pause).

5. Troubleshooting

If the remote control does not function as expected, please follow these troubleshooting steps:

1. Remove Batteries: Take out the batteries from the remote control.
2. Drain Residual Power: Press every button on the remote for at least 3 seconds, one by one, to drain any residual power.
3. Insert New Batteries: Insert brand-new batteries into the remote, ensuring correct polarity.
4. Check Sound Bar: If the remote still does not work, the issue might be with the sound bar itself. Unplug the sound bar from the power outlet and hold down its power button for 15 seconds. Then, plug the sound bar back in and power it on.

If these steps do not resolve the issue, please refer to the support section.

6. Specifications

7. Warranty and Support

For any questions, technical assistance, or warranty information regarding your Smartby RMT-AH200U replacement remote control, please contact the manufacturer directly. Keep your purchase receipt for warranty claims.

For further assistance, you may also visit the Smartby Store on Amazon.