SLLEA AC/DC Adapter (Compatible with Sony MDR-RF811, MDR-RF811RK)

SLLEA AC/DC Adapter Instruction Manual

For Sony MDR-RF811 / MDR-RF811RK Wireless Stereo Headphone Systems

1. Introduction

This manual provides essential instructions for the safe and effective use of your SLLEA AC/DC Adapter. This adapter is designed to provide power to compatible devices, specifically the Sony MDR-RF811 and MDR-RF811RK rechargeable headband wireless stereo headphone systems. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

  • Ensure the adapter's voltage and current ratings match your device's requirements before connecting.
  • Do not expose the adapter to water, moisture, or extreme temperatures.
  • Avoid dropping or subjecting the adapter to strong impacts.
  • Do not attempt to disassemble or modify the adapter. This may cause damage and void any warranty.
  • Unplug the adapter from the power outlet when not in use for extended periods.
  • Keep out of reach of children.

3. Product Overview

The SLLEA AC/DC Adapter is a reliable power supply unit designed for specific electronic devices. It features a compact design for portability and ease of use.

SLLEA AC/DC Adapter with power plug and DC connector

Figure 1: SLLEA AC/DC Adapter. This image shows the black adapter unit with a standard US two-prong plug on one end and a DC barrel connector on the other, connected by a black cable.

Key Features:

  • Input Voltage: 100 - 240 VAC, 50/60Hz (Worldwide Voltage Use).
  • Cable Length: Approximately 4 feet (1.2 meters).
  • Safety Certifications: CE certified.
  • Protection Features: Over Voltage Protection, Over Heat Protection.
  • Connector Type: Round DC barrel connector.

4. Setup Instructions

Follow these steps to properly set up your SLLEA AC/DC Adapter:

  1. Verify Compatibility: Before connecting, confirm that your device (e.g., Sony MDR-RF811RK) requires the specific voltage and current output provided by this SLLEA adapter. Refer to your device's original manual or specifications.
  2. Connect to Device: Carefully insert the DC barrel connector of the adapter into the power input port of your compatible device. Ensure a snug and secure fit.
  3. Connect to Power Outlet: Plug the AC prongs of the adapter into a standard 100-240V wall outlet.
  4. Power On Device: Once connected, you can power on your device as per its own operating instructions.

Important Note: Always connect the adapter to the device first, then to the wall outlet.

5. Operating Instructions

The SLLEA AC/DC Adapter functions as a power supply. Its operation is straightforward:

  • Once properly connected to both the power outlet and your device, the adapter will supply the necessary power.
  • For charging rechargeable devices like the Sony MDR-RF811RK headphones, the adapter will facilitate the charging process. Refer to your device's manual for specific charging indicators and times.
  • The adapter is designed for continuous use within its specified operating parameters.

Disconnection: To disconnect, first power off your device (if applicable), then unplug the adapter from the wall outlet, and finally disconnect the DC connector from your device.

6. Maintenance

Proper maintenance ensures the longevity and safe operation of your adapter:

  • Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
  • Inspection: Periodically inspect the cable and connectors for any signs of wear, fraying, or damage. If any damage is observed, discontinue use immediately and replace the adapter.

7. Troubleshooting

If you encounter issues with your SLLEA AC/DC Adapter, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Device not receiving power.
  • Adapter not fully plugged in.
  • Wall outlet is not active.
  • Device power port issue.
  • Adapter or cable damage.
  • Ensure adapter is securely plugged into both the device and the wall outlet.
  • Test the wall outlet with another device.
  • Check the device's power port for debris or damage.
  • Inspect the adapter and cable for visible damage. If damaged, replace.
Adapter feels excessively hot.
  • Overload or short circuit.
  • Poor ventilation.
  • Immediately unplug the adapter and device. Allow to cool. Ensure device compatibility.
  • Ensure the adapter is in a well-ventilated area.
Device not charging (for rechargeable devices).
  • Device battery issue.
  • Incorrect adapter.
  • Consult your device's manual for battery troubleshooting.
  • Double-check that this adapter is specifically designed for your device's charging requirements.

If the problem persists after trying these solutions, contact customer support.

8. Specifications

BrandSLLEA
Input Voltage100-240V AC, 50/60Hz
Compatible DevicesSony MDR-RF811, Sony MDR-RF811RK, Sony MDRRF811RK Rechargeable Headband Wireless Stereo Headphone System
Connector TypeRound DC Barrel Connector
Cable LengthApprox. 4 feet (1.2 meters)
ColorBlack
Special FeatureTravel-friendly design

9. Warranty and Support

For information regarding warranty coverage, returns, or technical support, please refer to the purchase documentation or contact the seller directly. Keep your purchase receipt as proof of purchase.

Manufacturer: SLLEA

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.