Armitron Men's 20/4664 Multifunction Stainless Steel Bracelet Watch User Manual
Model: 20/4664
Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Armitron Men's 20/4664 Multifunction Stainless Steel Bracelet Watch. Please read this manual carefully to ensure proper use and to maximize the lifespan of your timepiece.
Product Overview
Key Features
- Gold-tone stainless steel case and five-link bracelet.
- Striped textured dial with logo.
- Japanese quartz movement with analog display.
- Protective mineral crystal lens.
- Unidirectional bezel with engraved Arabic numerals.
- Multifunction subdials for day, date, and 24-hour time.
- Luminous hour and minute hands, sweeping second hand.
- Fold-over push-button clasp with safety closure.
- Water-resistant to 50 meters (165 feet).
Watch Components
Familiarize yourself with the main components of your watch:
- Crown: Used for setting time and date.
- Pushers: (If applicable) Used for adjusting specific subdial functions.
- Subdials: Display day, date, and 24-hour time.
- Bezel: Unidirectional rotating ring around the crystal.
Figure 1: Front view of the Armitron Men's 20/4664 Multifunction Stainless Steel Bracelet Watch, showcasing the gold-tone case, textured dial, and three subdials.
Figure 2: Side view of the watch, highlighting the crown and the profile of the case and bracelet.
Figure 3: Rear view of the watch, displaying the stainless steel case back and the open fold-over clasp of the bracelet.
Figure 4: The Armitron watch displayed on a wrist, illustrating its size and appearance when worn.
Figure 5: A visual guide comparing various watch case sizes, from 14-16mm to 50-54mm, to help understand the watch's dimensions relative to other common sizes.
Setup
Setting the Time
- Pull the crown out to position 2 (the outermost position). The second hand will stop.
- Rotate the crown clockwise or counter-clockwise to set the hour and minute hands to the desired time. Ensure AM/PM is correctly set if the watch has a 24-hour indicator.
- Push the crown back into position 0 (normal operating position) to start the watch.
Setting the Date and Day
The watch features subdials for date and day. These are typically adjusted via the crown in an intermediate position or using dedicated pushers.
- Pull the crown out to position 1 (the first click).
- Rotate the crown to adjust the date subdial.
- If there are additional pushers on the side of the watch case, use them to adjust the day subdial. Press the appropriate pusher repeatedly until the correct day is displayed.
- Once set, push the crown back into position 0.
Note: Avoid setting the date or day between 9 PM and 3 AM, as this can interfere with the automatic date change mechanism.
Bracelet Adjustment
The stainless steel bracelet can be adjusted for a comfortable fit. This usually involves removing or adding links. It is recommended to have this procedure performed by a professional jeweler to prevent damage to the bracelet or clasp.
Operating the Multifunction Subdials
Your Armitron 20/4664 watch is equipped with three subdials:
- Day Subdial: Indicates the current day of the week (e.g., MON, TUE).
- Date Subdial: Displays the current day of the month (1-31).
- 24-Hour Subdial: Shows the current time in a 24-hour format, useful for distinguishing AM/PM. This subdial operates in conjunction with the main time display.
These subdials operate automatically once the main time and date/day are set. No further manual adjustment is typically required unless the watch has stopped or the date/day needs correction after an irregular month length.
Maintenance
Cleaning
To maintain the appearance of your watch, wipe the case and bracelet regularly with a soft, dry cloth. For stainless steel, a slightly damp cloth can be used, followed by a dry one. Avoid using harsh chemicals or abrasive materials.
Water Resistance
This watch is water-resistant to 50 meters (165 feet). This rating means it is suitable for short periods of recreational swimming. It is not suitable for diving, snorkeling, or prolonged water activities. Do not operate the crown or pushers while the watch is wet or submerged, as this can compromise the water resistance.
Battery Replacement
The watch is powered by a product-specific battery. When the watch stops or the second hand begins to skip, it indicates a low battery. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch not running | Battery depleted; Crown not pushed in. | Replace battery (professionally); Push crown fully into position 0. |
| Time/Date incorrect | Needs adjustment. | Refer to "Setting the Time" and "Setting the Date and Day" sections. |
| Condensation inside crystal | Water resistance compromised. | Have the watch inspected and repaired by a professional immediately to prevent further damage. |
Specifications
- Model Number: 20/4664CHGP
- Movement: Japanese Quartz
- Case Material: Gold-tone Stainless Steel
- Case Diameter: 43.5mm
- Crystal: Mineral
- Water Resistance: 50 meters (165 feet)
- Bracelet: Gold-tone Adjustable Link Stainless Steel
- Clasp: Fold-over Push-button with Safety Closure
- Battery: 1 Product Specific battery (included)
- Package Dimensions: 9.8 x 8 x 7.4 cm
- Item Weight: 300 g
Warranty Information
Armitron watches typically come with a limited manufacturer's warranty covering defects in materials and workmanship. Please refer to the warranty card included with your purchase or visit the official Armitron website for specific terms and conditions regarding your model.
Customer Support
For further assistance, technical support, or service inquiries, please contact Armitron customer service. Contact details can usually be found on the official Armitron website or on the packaging materials.
