Logitech G433 7.1 Wired Gaming Headset User Manual

Introduction

Thank you for choosing the Logitech G433 7.1 Wired Gaming Headset. This headset is designed to deliver immersive audio experiences for gaming across multiple platforms, including PC, PlayStation, Xbox, and Nintendo Switch. Featuring DTS Headphone:X 7.1 surround sound, it provides precise positional audio, enhancing your gaming and entertainment. This manual will guide you through the setup, operation, and maintenance of your new headset.

Safety Information

• Hearing Safety: To prevent possible hearing damage, do not listen at high volume levels for long periods.
• Ventilation: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Water and Moisture: Do not use this apparatus near water.
• Cleaning: Clean only with a dry cloth.
• Power Sources: Only use attachments/accessories specified by the manufacturer.

Package Contents

Your Logitech G433 headset package should include the following items:

• Logitech G433 7.1 Wired Gaming Headset
• Detachable boom microphone with micro-pop filter
• PC cable with inline volume and mute controls
• Console/mobile cable
• PC splitter for separate microphone and headphone jacks
• USB DAC for DTS Headphone:X 7.1 surround sound (PC only)
• Additional microfiber ear pads
• Headset carry bag

Product Overview

The G433 headset is designed for versatility and comfort. It features a detachable boom microphone, allowing you to use it as a gaming headset or as a pair of headphones for music and movies. The earcups are equipped with breathable sports mesh earpads, and the fabric is hydrophobic and stain-resistant.

Setup

Connecting to PC (with 7.1 Surround Sound)

1. Connect the PC cable (with inline volume/mute) to the headset's 3.5mm jack.
2. Connect the USB DAC to an available USB port on your PC.
3. Plug the PC cable's 3.5mm connector into the USB DAC.
4. For 7.1 surround sound, download and install the Logitech G HUB software from the official Logitech website.
5. Insert the detachable boom microphone into the headset's microphone port.

Connecting to PC (Stereo Audio)

1. Connect the PC cable (with inline volume/mute) to the headset's 3.5mm jack.
2. If your PC has separate audio and microphone jacks, use the included PC splitter. Connect the green plug to the headphone jack and the pink plug to the microphone jack on your PC.
3. If your PC has a single combined audio/mic jack, plug the PC cable's 3.5mm connector directly into it.
4. Insert the detachable boom microphone into the headset's microphone port.

Connecting to PlayStation 4 / PlayStation 4 Pro

1. Connect the console/mobile cable to the headset's 3.5mm jack.
2. Plug the other end of the console/mobile cable into the 3.5mm jack on your PS4/PS4 Pro controller.
3. Insert the detachable boom microphone into the headset's microphone port.
4. Adjust audio settings on your PS4/PS4 Pro: Go to Settings > Devices > Audio Devices > Output to Headphones > All Audio.

Connecting to Xbox One / Xbox One S

1. Connect the console/mobile cable to the headset's 3.5mm jack.
2. Plug the other end of the console/mobile cable into the 3.5mm jack on your Xbox One/Xbox One S controller. (Note: Older Xbox One controllers may require the Xbox One Stereo Headset Adapter, sold separately).
3. Insert the detachable boom microphone into the headset's microphone port.

Connecting to Nintendo Switch

1. Connect the console/mobile cable to the headset's 3.5mm jack.
2. Plug the other end of the console/mobile cable into the 3.5mm audio jack on your Nintendo Switch console.
3. Insert the detachable boom microphone into the headset's microphone port.

Operating

Audio Controls

• Inline Volume Wheel: Rotate the wheel on the PC cable or console/mobile cable to adjust the audio volume.
• Inline Mute Switch: Flip the switch on the PC cable or console/mobile cable to mute or unmute the microphone.

DTS Headphone:X 7.1 Surround Sound (PC Only)

To enable and customize DTS Headphone:X 7.1 surround sound, ensure you are connected via the USB DAC and have the Logitech G HUB software installed. The software allows you to:

• Activate 7.1 surround sound.
• Adjust individual channel volumes.
• Create custom audio profiles for different games or media.
• Access advanced equalizer settings.

Refer to the Logitech G HUB software's in-app help for detailed instructions on configuring surround sound and other audio settings.

Maintenance

Cleaning

• Headset Body: Wipe the headset with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
• Earpads: The sports mesh earpads are removable and can be gently hand-washed with mild soap and water. Ensure they are completely dry before reattaching them to the headset.
• Microphone: Gently wipe the microphone and pop filter with a dry cloth.

Storage

When not in use, store the headset in a cool, dry place, away from direct sunlight and extreme temperatures. Use the included carry bag to protect the headset during travel or storage.

Troubleshooting

Specifications

Warranty and Support

Logitech products are manufactured to the highest quality standards. For information regarding warranty coverage, technical support, and frequently asked questions, please visit the official Logitech support website. You can find detailed warranty terms and conditions, as well as contact information for customer service, by navigating to the support section for your specific product model.

Online Support: support.logi.com