LKPower AC Adapter for Tenvis IProbot3 Camera

1. Introduction

This manual provides essential information for the safe and effective use of your LKPower AC Adapter, model 180110507. This adapter is designed to provide reliable power to your Tenvis IProbot3 Wireless IR WiFi IP Network Camera, enabling its operation from standard electrical power outlets. It converts alternating current (AC) from the wall outlet into direct current (DC) required by your device.

2. Safety Information

• Ensure the adapter's input voltage range (AC 100-240V) matches your local power supply.
• Do not expose the adapter to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the adapter to severe impact.
• Do not attempt to open or modify the adapter. This may void the warranty and pose safety risks.
• Unplug the adapter from the power outlet when not in use for extended periods.
• This adapter features built-in over-voltage and over-heat protection for enhanced safety.
• Keep out of reach of children.

3. Package Contents

• 1 x LKPower AC Adapter (Model: 180110507)

4. Setup

Follow these steps to set up your AC adapter:

1. Connect to Device: Insert the DC output plug of the AC adapter into the power input port of your Tenvis IProbot3 Wireless IR WiFi IP Network Camera. Ensure a secure connection.
2. Connect to Power Outlet: Plug the AC input prongs of the adapter into a standard electrical wall outlet.
3. Verify Power: Once connected, your camera should receive power. Refer to your camera's manual for indicators of successful power connection.

Figure 4.1: LKPower AC Adapter showing the main unit, cable, and DC output plug.

Figure 4.2: The AC adapter connected to a power strip, illustrating a typical setup.

5. Operating Instructions

The LKPower AC Adapter operates automatically once connected to a power source and your compatible device. It provides continuous power to your Tenvis IProbot3 camera. No user intervention is required during operation.

6. Maintenance

To ensure the longevity and proper functioning of your AC adapter:

• Cleaning: Disconnect the adapter from both the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Storage: Store the adapter in a cool, dry place away from direct sunlight and excessive heat when not in use. Avoid tightly coiling the cable to prevent damage.
• Inspection: Periodically inspect the cable and adapter housing for any signs of damage, such as cuts, fraying, or cracks. If damage is observed, discontinue use and replace the adapter.

7. Troubleshooting

If your device is not receiving power, consider the following:

• No Power to Device:
  • Ensure the adapter is securely plugged into a functional wall outlet. Test the outlet with another device.
  • Verify that the DC plug is fully inserted into your Tenvis IProbot3 camera's power input port.
  • Check the adapter's cable for any visible damage. If damaged, replace the adapter.
• Intermittent Power:
  • Ensure all connections are firm and stable. Loose connections can cause intermittent power.
  • Avoid placing the cable where it can be bent sharply or pinched.

If issues persist after performing these checks, contact customer support.

8. Specifications

Figure 8.1: Front and side views of the LKPower AC Adapter.

Figure 8.2: Physical dimensions of the adapter unit and cable length. The adapter measures approximately 2.6 inches (length) x 1.6 inches (width) x 1.2 inches (height). The cable length is approximately 76 inches.

9. Warranty Information

Specific warranty terms for the LKPower AC Adapter may vary depending on the retailer and region of purchase. For detailed warranty information, including coverage period and claims process, please refer to the documentation provided at the time of purchase or contact your retailer directly. You may also visit the official LKPower website for general warranty policies.

10. Support

For technical assistance, troubleshooting guidance, or any other inquiries regarding your LKPower AC Adapter, please contact:

• Your Retailer: For immediate support and return/exchange policies.
• LKPower Customer Service: Refer to the manufacturer's official website for contact details, including email and phone support.