Introduction
Thank you for purchasing the Hyper Tough 3-Outlet Power Strip. This manual provides important information regarding the safe operation, installation, and maintenance of your new power strip. Please read this manual thoroughly before use and retain it for future reference.
This power strip is designed for indoor use only and features three 3-pronged, 16-gauge outlets with a 1-foot cord, offering flexibility for hard-to-reach outlets.
Safety Information
WARNING: To reduce the risk of electric shock or fire, observe the following safety precautions:
- Do not exceed the electrical ratings of the power strip (125 Volts).
- This product is for indoor use only. Do not use in wet locations or near water.
- Do not plug into another relocatable power tap or extension cord.
- Fully insert plug.
- Keep children away from the power strip.
- Do not disassemble or modify the power strip.
- Avoid overheating. Do not cover the power strip or cord.
- Uncoil cord before use.
Figure 1: Hyper Tough 3-Outlet Power Strip. This image displays the power strip itself, highlighting its three outlets and the attached 1-foot power cord with a 3-pin plug. The cord is uncoiled, ready for use.
Setup
- Unpack the Power Strip: Carefully remove the power strip from its packaging. Inspect the unit and cord for any signs of damage. If damaged, do not use and contact customer support.
Figure 2: Hyper Tough 3-Outlet Power Strip in Packaging. This image shows the product as it appears in its retail packaging, providing a view of both the front and back of the packaging material.
- Uncoil the Cord: Before plugging in, fully uncoil the 1-foot power cord to prevent overheating.
- Select a Location: Choose a dry, indoor location away from water sources, heat, and direct sunlight. Ensure the location allows for proper ventilation around the power strip.
- Plug into Wall Outlet: Insert the power strip's 3-pronged plug firmly into a standard 125V grounded wall outlet. Do not force the plug into an ungrounded outlet.
Operating Instructions
Once the power strip is plugged into a wall outlet, it is ready for use. The Hyper Tough 3-Outlet Power Strip does not feature an on/off switch or surge protection indicator lights; it provides continuous power to connected devices when plugged in.
- Connect Devices: Plug your electronic devices into any of the three 3-pronged outlets on the power strip. Ensure that the total power consumption of all connected devices does not exceed the power strip's maximum rating (125 Volts).
- Cord Management: The 1-foot cord allows for flexible placement. Position the power strip and cord in a way that avoids tripping hazards and prevents the cord from being pinched or damaged.
Maintenance
Regular maintenance ensures the longevity and safe operation of your power strip.
- Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or sprays.
- Inspection: Periodically inspect the power strip, cord, and plug for any signs of wear, damage, or fraying. If any damage is observed, discontinue use immediately and replace the unit.
- Storage: When not in use, store the power strip in a cool, dry place away from direct sunlight and moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to connected devices. | Power strip not fully plugged into wall outlet. | Ensure the power strip's plug is fully inserted into a working wall outlet. |
| Wall outlet is not functioning. | Test the wall outlet with another device to confirm it is receiving power. Check your home's circuit breaker. | |
| Connected device is faulty. | Test the connected device by plugging it directly into a known working wall outlet. | |
| Power strip or cord feels warm. | Overloaded or covered. | Unplug devices and reduce the load. Ensure the power strip is not covered and has adequate ventilation. Discontinue use if it remains excessively warm. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | 3-Outlet Power Strip |
| ASIN | B078WM4SWZ |
| Brand | Hyper Tough |
| Total Power Outlets | 3 |
| Cord Length | 1 ft. (30.5 cm) |
| Wire Gauge | 16 Gauge |
| Plug Type | 3-pronged, Type B (North American) |
| Voltage Rating | 125 Volts |
| Usage Environment | Indoor Use Only |
| Dimensions (Package) | 5 x 2.83 x 1.26 inches |
| Item Weight | 0.81 ounces |
| Manufacturer | Hyper Tough |
| Date First Available | January 8, 2018 |
Warranty and Support
The product information indicates a 2-Year Limited Warranty. For warranty details and support, please refer to the information provided on the product packaging or contact Hyper Tough customer service.
For further assistance or inquiries, please visit the official Hyper Tough website or contact their customer support line. Specific contact details are typically found on the product packaging or manufacturer's website.
Note: Warranty terms and conditions may vary and are subject to the manufacturer's policy. Keep your purchase receipt for warranty claims.