Adesso 3565-01

Download PDF
Contents

Adesso Presley Torchiere Floor Lamp

Model: 3565-01

Introduction

Thank you for purchasing the Adesso Presley Torchiere Floor Lamp. This classic and sophisticated floor lamp is designed to illuminate your home with a unique glow. Its slim silhouette and black nickel finish contribute to a modern style that can fit seamlessly into various room settings. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new lamp.

Adesso Presley Torchiere Floor Lamp

Image: The Adesso Presley Torchiere Floor Lamp, showcasing its black nickel finish and upward-facing shade.

Safety Information

Please read all safety instructions carefully before assembly and use. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • This lamp operates on 120 volts. Ensure your power supply matches this requirement.
  • Use only a 150 Watt incandescent or CFL bulb with an E26 base.
  • To reduce the risk of electric shock, always unplug the lamp from the electrical outlet before cleaning or changing the light bulb.
  • Do not use with a dimmer switch unless specifically rated for the lamp and bulb type.
  • Keep away from water and moisture. This lamp is for indoor use only and is not water resistant.
  • All Adesso lighting products are ETL listed, meaning they have been tested and approved to meet government-regulated safety standards for the USA.
UL and ETL safety certification logos

Image: Logos indicating UL and ETL safety certifications, confirming the product meets safety standards.

Package Contents

Please check the package carefully to ensure all components are present and undamaged.

  • 1 x Adesso Presley Torchiere Floor Lamp (Model: 3565-01)
  • Note: The light bulb is not included in the packaging and must be purchased separately.

Setup and Assembly

The Adesso Presley Torchiere Floor Lamp (Model 3565-01) is designed for minimal assembly. No complex assembly is required.

  1. Carefully remove all components from the packaging.
  2. Place the lamp base on a flat, stable surface.
  3. Insert a compatible 150 Watt (max) 3-way incandescent or CFL bulb with an E26 base into the socket.
  4. Plug the lamp into a standard 120V electrical outlet.
Adesso Presley Torchiere Floor Lamp assembled

Image: The fully assembled Adesso Presley Torchiere Floor Lamp, ready for use.

Operating Instructions

The Presley Torchiere Floor Lamp features a convenient 3-way rotary switch for versatile lighting control.

  • Power On/Off and Brightness Control: Locate the rotary switch below the shade. Rotate the switch clockwise to cycle through the brightness settings: Low, Medium, High, and Off.
  • 3-Way Bulb Compatibility: For the 3-way functionality (Low, Medium, High) to work, you must use a 3-way light bulb. If a standard (non-3-way) bulb is used, the lamp will function as a simple on/off switch at its highest setting.
  • Smart Outlet Compatibility: This lamp is compatible with smart outlets. When connected to a smart outlet, the lamp will function as a simple on/off switch, turning on to its highest setting when power is supplied by the smart outlet.
Adesso Presley Torchiere Floor Lamp in a living room setting

Image: The Adesso Presley Torchiere Floor Lamp illuminating a corner in a room, demonstrating its functional placement.

Maintenance

Proper care will ensure the longevity and appearance of your lamp.

  • Cleaning: Always unplug the lamp before cleaning. Use a soft, dry cloth to wipe down the metal and plastic surfaces. Do not use abrasive cleaners, polishes, or chemicals, as these may damage the finish.
  • Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled completely before attempting to replace it. Screw the new E26 base bulb firmly into the socket.
  • Shade Care: The clear plastic outer shade and frosted inner shade can be gently wiped with a damp cloth if needed, then dried immediately.

Troubleshooting

If you encounter any issues with your lamp, please refer to the following common solutions:

ProblemPossible CauseSolution
Lamp does not turn on.No power to outlet; Bulb is loose or burnt out; Switch is faulty.Check if outlet is working; Tighten or replace bulb; Contact customer support if switch is faulty.
3-way function not working.Using a standard (non-3-way) bulb.Replace with a 3-way compatible light bulb.
Lamp flickers.Loose bulb; Incompatible bulb type; Unstable power supply.Tighten bulb; Ensure bulb is compatible (incandescent/CFL); Check power source.

Specifications

Detailed technical specifications for the Adesso Presley Torchiere Floor Lamp.

  • Model Number: 3565-01
  • Brand: Adesso
  • Lamp Type: Floor Lamp (Torchiere)
  • Dimensions: 8"D x 8"W x 72"H
  • Item Weight: 5.77 Pounds
  • Material: Metal, Plastic
  • Color: Black Nickel
  • Shade Color: Black (outer), Frosted (inner)
  • Shade Material: Plastic
  • Light Source Type: Incandescent / CFL
  • Wattage: 150 Watts (Max)
  • Bulb Base: E26
  • Voltage: 120 Volts
  • Switch Type: Rotary (3-Way)
  • Special Feature: 3-Way, Smart Outlet Compatible
  • Indoor/Outdoor Usage: Indoor
  • Assembly Required: No
  • Certifications: ETL Listed
Comparison of Torchiere Floor Lamp and 3-Arm Floor Lamp

Image: A visual comparison highlighting the features of the Torchiere Floor Lamp (left) versus a 3-Arm Floor Lamp (right), emphasizing the unique design of the Presley model.

Warranty and Support

Adesso stands behind the quality of its products. For information regarding warranty coverage or technical support, please visit the official Adesso website or contact their customer service department. Keep your purchase receipt as proof of purchase.

You can find more information and contact details on the Adesso Store Page.

© 2023 Adesso. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.