ANVIL ALL COLORS

ANVIL TSA Approved Luggage Lock Instruction Manual

Model: ALL COLORS

Brand: ANVIL

Introduction

The ANVIL TSA Approved Luggage Lock provides enhanced security for your belongings during travel and storage. Designed with a 4-digit combination, it offers 10,000 possible combinations for superior protection. Its easy-read password window ensures convenience, while its TSA approval allows security agents to inspect your luggage without damaging the lock.

Four ANVIL TSA Approved Luggage Locks in yellow, red, black, and purple, showcasing their design and 4-digit combination dials.

Image: A set of ANVIL TSA Approved Luggage Locks in various colors, highlighting their compact design and combination dials.

Key Features

  • 4-Digit Combination: Offers 10,000 unique combinations for enhanced security.
  • TSA Approved: Allows TSA agents to inspect luggage without cutting or damaging the lock.
  • Durable Construction: Features an ultra-durable zinc alloy body and hardened steel shackle for resilience against rough handling.
  • Easy-Read Dials: High contrast white-on-black dial numerals and a clear combination window ensure easy reading, even in low light.
  • Resettable Combination: Easily set and change your personal combination as many times as needed.
  • Versatile Use: Suitable for luggage, backpacks, gym lockers, student lockers, and more.
  • Impact-Resistant Coating: An added coating helps absorb shocks and prevent dents.
Collage showing multiple uses for the ANVIL TSA lock, including on a gym locker, backpack, suitcase on a conveyor belt, and a gun case.

Image: Various applications of the ANVIL lock, demonstrating its versatility for securing different items.

Close-up of the ANVIL lock's combination window, showing the clear white-on-black numbers for easy reading.

Image: A detailed view of the lock's combination window, emphasizing its design for clear visibility and accurate dialing.

Setup: Setting Your Combination

Your ANVIL TSA Approved Luggage Lock comes with a default combination of 0-0-0-0. Follow these steps to set your personalized combination:

  1. Ensure the lock is set to the default code 0-0-0-0 and the shackle is open. The default code is located on the side of the lock.
  2. Lift the silver shackle, rotate it 90 degrees clockwise (from position A to B in the figure), press down firmly, then rotate another 90 degrees (total 180 degrees). The shackle should remain pressed down.
  3. While holding the shackle down, set your new code by moving the dials to your desired 4-digit combination. For example, 1-2-3-4.
  4. Turn the shackle back to its original closed position. Your new combination has now been set.

To change your combination again, repeat these steps, starting with your current set combination.

Four step-by-step diagrams illustrating how to set the combination on the ANVIL TSA lock, showing shackle rotation and dial setting.

Image: Visual guide for setting or resetting the 4-digit combination on the lock.

Operating the Lock

To open the lock, align the dials to your set 4-digit combination and pull the shackle upwards. To close the lock, press the shackle down into the lock body and scramble the dials to secure it.

The lock features a TSA keyway at the bottom, identifiable by the red Travel Sentry diamond logo. This allows authorized TSA agents to open your lock using a master key for inspection without causing damage, ensuring your luggage remains secure and intact.

A TSA agent inspecting luggage with an ANVIL TSA lock, demonstrating the lock's TSA acceptance and keyway.

Image: A TSA agent demonstrating the use of the TSA keyway on an ANVIL lock during luggage inspection.

Image showing ANVIL locks used on various types of bags, including a suitcase and a duffel bag, emphasizing their widespread applicability.

Image: Examples of the ANVIL lock in use on different types of luggage, illustrating its practical application.

Maintenance

The ANVIL TSA Approved Luggage Lock is constructed from durable zinc alloy and hardened steel, designed for longevity. To ensure optimal performance and extend the life of your lock:

  • Keep the lock clean and free from dirt or debris, especially around the dials and shackle mechanism.
  • Avoid exposing the lock to extreme temperatures or harsh chemicals, which could affect its finish or internal components.
  • Periodically check the shackle and dials for smooth operation. If they become stiff, a small amount of graphite lubricant can be applied.
  • While the lock features an impact-resistant coating, avoid unnecessary drops or impacts to prevent potential damage.
A person giving a thumbs up next to an ANVIL lock, with text highlighting its ultra-durable zinc alloy body.

Image: Emphasizing the robust construction of the ANVIL lock, built with ultra-durable zinc alloy.

A purple ANVIL lock next to a suitcase, with an arrow pointing to the lock's body and text describing its impact-resistant coating.

Image: Highlighting the impact-resistant coating of the ANVIL lock, designed for durability.

Troubleshooting

  • Lock will not open: Ensure all four digits are precisely aligned with your set combination. The dials should click into place. If you have forgotten your combination, unfortunately, there is no master reset button other than knowing the combination. You may need to try common combinations or refer to the setup instructions to attempt a reset if the shackle can be opened.
  • Dials are stiff or hard to turn: This can be caused by dirt or dust accumulation. Clean the dials with a soft cloth. If the issue persists, apply a small amount of silicone-based lubricant or graphite powder to the moving parts of the dials.
  • Shackle does not close properly: Check for any obstructions around the shackle opening. Ensure the shackle is fully inserted and the dials are scrambled after closing to secure the lock.

Specifications

AttributeDetail
ManufacturerANVIL
ModelTSA Approved Luggage Lock
Combination Type4-Digit Resettable
Number of Combinations10,000
Body MaterialZinc Alloy
Shackle MaterialHardened Steel
WeightApproximately 2.50 oz (70.87 grams)
Total Height1.79 in (45.6 mm)
Body Width1.21 in (30.9 mm)
Shackle Clearance (Height)0.91 in (23.2 mm)
Shackle Clearance (Width)0.78 in (20 mm)
Shackle Thickness0.13 in (3.4 mm)
Date First AvailableJanuary 8, 2018
A black ANVIL lock with detailed dimensions overlaid, showing its height, width, and shackle measurements.

Image: Detailed dimensions of the ANVIL lock, including its weight, for precise understanding of its size.

Warranty

ANVIL provides a comprehensive Lifetime Warranty for this product. This warranty covers damage incurred by the TSA and baggage handlers, ensuring peace of mind for your travels. For warranty claims or inquiries, please refer to the support section.

Support

For further assistance, product information, or to explore other ANVIL products, please visit the official ANVIL store:

Visit the ANVIL Store

Related Documents - ALL COLORS

Preview Anvil User Manual: Safe Operation and Maintenance
Comprehensive user manual for Anvil products, detailing product structure, usage guidelines, safety instructions, and maintenance tips for metalworking.
Preview Anvil ANVIL-1 Tree Pruner Use and Care Guide - Safety and Operation Instructions
Comprehensive use and care guide for the Anvil ANVIL-1 tree pruner. Learn how to set cutting angles, operate the pruner safely, and perform maintenance. Includes important safety warnings and cleaning instructions.
Preview Anvil 4 cu ft Poly Tray Wheelbarrow Use and Care Guide
This guide provides instructions for the safe use, care, and assembly of the Anvil 4 cu ft Poly Tray Wheelbarrow. It includes safety warnings, a list of required tools, hardware included, package contents, and step-by-step assembly instructions.
Preview Anvil 12 in. Luxury Vinyl Tile (LVT) Cutter: Use and Care Guide
Anvil 12-inch Luxury Vinyl Tile (LVT) Cutter: Use and Care Manual. This guide details how to safely and effectively operate the Anvil LVT cutter for vinyl plank, WPC, and SPC flooring. Includes features, usage steps, and safety precautions.
Preview Anvil Brand Hinges, Door Hardware, and Accessories Catalog
A comprehensive catalog showcasing a wide range of Anvil brand hardware, including various types of hinges, door stops, locks, latches, security hardware, and related accessories. The catalog details product specifications, materials, finishes, and packaging information.
Preview Anvil 12" Vinyl Flooring Cutter (Model 10-890ANV) - Precision Cutting Tool
Discover the Anvil 12" Vinyl Flooring Cutter (Model 10-890ANV), designed for efficient cutting of LVP, LVT, SPC, and VCT up to 5.5mm. Features include a hardened steel blade, ergonomic handle, safety latch, and built-in ruler for precise cuts.