1. Introduction
Thank you for choosing the Ryobi 18-Volt ONE+ Compact Blower. This manual provides essential information for the safe assembly, operation, and maintenance of your new tool. Please read this manual thoroughly before using the product and retain it for future reference. This compact and lightweight blower is designed for clearing dust and debris from workshops, jobsites, and other areas requiring focused airflow.
2. General Safety Information
WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
2.1 Important Safety Precautions
- Always wear eye protection when operating the blower.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Use the correct power tool for your application. Do not force the tool.
- Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
- Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation.
- Use the power tool, accessories, and tool bits in accordance with these instructions, taking into account the working conditions and the work to be performed.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Product Components
The Ryobi 18-Volt ONE+ Compact Blower consists of the main blower unit and a detachable nozzle. The battery and charger are sold separately unless specified in the product package.
3.1 Key Features
- Compact and Lightweight Design: Easy to handle and maneuver for various cleaning tasks.
- Maximum Air Speed up to 160 MPH: Provides powerful airflow for efficient debris removal.
- Variable Speed Trigger with 3 Speed Settings: Allows adjustment of airflow intensity to suit different applications.
- Integrated Rubber Nozzle: Designed to protect surfaces from scratches during operation.
- Part of the RYOBI ONE+ System: Compatible with any RYOBI ONE+ 18-Volt battery.
4. Setup and Assembly
4.1 Attaching the Nozzle
- Align the nozzle with the blower outlet.
- Push the nozzle firmly onto the blower until it clicks into place, ensuring a secure connection.
4.2 Battery Installation and Charging
- Ensure the blower is turned off before inserting or removing the battery.
- Insert a charged Ryobi 18-Volt ONE+ battery pack into the battery port on the blower until it locks securely.
- To remove the battery, press the release tabs on the sides of the battery pack and pull it out.
- To charge the battery, connect the charger to a power outlet and insert the battery pack into the charger. Follow the charger's instructions for proper charging.
5. Operating Instructions
5.1 Starting and Stopping the Blower
- Ensure the battery is properly installed.
- To start the blower, press and hold the variable speed trigger.
- To stop the blower, release the variable speed trigger.
5.2 Adjusting Air Speed
The blower features a variable speed trigger with three distinct speed settings:
- Low Speed: Ideal for delicate tasks or areas where minimal airflow is required.
- Medium Speed: Suitable for general cleaning and light debris.
- High Speed (up to 160 MPH): For heavy-duty clearing of stubborn debris.
To adjust the speed, use the speed selector switch located on the handle. The trigger also allows for fine-tuning of the airflow within each selected speed range.
5.3 Recommended Uses
This blower is versatile for various tasks:
- Clearing sawdust and wood chips from workbenches and floors.
- Removing leaves and light debris from patios, driveways, and garages.
- Cleaning out car interiors or engine bays.
- Drying wet surfaces or equipment.
6. Maintenance
Regular maintenance ensures optimal performance and extends the life of your Ryobi blower.
6.1 Cleaning
- Always remove the battery pack before cleaning.
- Wipe the exterior of the blower with a clean, damp cloth. Do not use strong detergents or solvents.
- Ensure the air intake and exhaust vents are free from debris to prevent overheating.
6.2 Storage
- Store the blower in a dry, well-ventilated area, out of reach of children.
- Remove the battery pack from the blower before storing for extended periods.
7. Troubleshooting
If you encounter issues with your blower, refer to the following table for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Blower does not start | Battery not charged or improperly installed. | Ensure battery is fully charged and correctly inserted. |
| Reduced airflow | Air intake/exhaust blocked or nozzle loose. | Clear any obstructions and ensure nozzle is securely attached. |
| Blower stops unexpectedly | Battery overheating or low charge. | Allow battery to cool down or recharge. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | RYOBI |
| Model Number | P755 |
| Power Source | Battery Powered (18-Volt ONE+ System) |
| Voltage | 18 Volts |
| Maximum Air Speed | 160 Miles per Hour |
| Form Factor | Handheld |
| Item Weight | 2.5 Pounds |
| Product Dimensions | 19.8"L x 5.25"W x 10"H |
| Material | Plastic |
| UPC | 033287174447 |
9. Warranty and Support
This product may be eligible for protection plans. For specific warranty details, please refer to the documentation included with your product packaging or visit the official RYOBI website. For technical support or service inquiries, please contact RYOBI customer service.
Protection plans are available for purchase separately:
- 2-Year Protection Plan
- 3-Year Protection Plan
