Introduction
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Artemide Athena Floor LED Dimmable Light. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: Artemide Athena Floor LED Dimmable Light. This image shows the complete floor lamp, featuring its minimalist design with a slim black stand, circular base, and a flat circular top that houses the LED light source, illuminating the area above it.
Safety Instructions
- Ensure the power supply is disconnected before installation or maintenance.
- This product is designed for indoor use only. Do not expose to moisture or extreme temperatures.
- Do not attempt to modify or repair the lamp. Contact qualified service personnel for assistance.
- Keep packaging materials away from children.
- Position the lamp on a stable, level surface to prevent tipping.
Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- Artemide Athena Floor LED Dimmable Light unit
- Power Cord
- Instruction Manual (this document)
Setup
- Unpacking: Carefully remove all components from the packaging. Retain packaging for future transport or storage.
- Assembly (if required): The Artemide Athena Floor LED Dimmable Light typically comes pre-assembled. If any minor assembly is needed (e.g., attaching the base to the pole), ensure all connections are secure. Refer to any included assembly diagrams.
- Placement: Choose a suitable indoor location with a stable, level surface. Ensure the power cord can reach an electrical outlet without being stretched or obstructed.
- Power Connection: Insert the power cord plug into a standard 120V AC electrical outlet.
Operating Instructions
The Artemide Athena Floor LED Dimmable Light features an integrated dimmer switch for adjusting light intensity.
- Turning On/Off: Locate the dimmer switch, typically integrated into the lamp's pole or base. Press the switch once to turn the light on or off.
- Dimming: While the light is on, press and hold the dimmer switch to gradually increase or decrease the light intensity. Release the switch when the desired brightness is achieved.
Maintenance
Regular maintenance ensures optimal performance and longevity of your lamp.
- Cleaning: Disconnect the lamp from the power supply before cleaning. Use a soft, dry cloth to wipe the surfaces. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by a dry cloth. Avoid abrasive cleaners or solvents.
- LED Light Source: The LED light source is integrated and not user-replaceable. Do not attempt to open the light head.
- Cord Inspection: Periodically inspect the power cord for any signs of damage. If damaged, discontinue use and contact customer support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Light flickers or dims unexpectedly. |
|
|
If the problem persists after attempting these solutions, please contact Artemide customer support.
Specifications
| Brand | Artemide |
| Model Number | USC-1833035A |
| Lamp Type | Integrated LED |
| LED Type | 38W C.O.B. (integrated) |
| Power Consumption | 44W |
| Delivered Lumens | 3492lm |
| Light Output Ratio | 79.36lm/W |
| Color Temperature (CCT) | 3000K |
| Color Rendering Index (CRI) | 90 |
| Input Voltage | 120V |
| Switch Type | Dimmer |
| Material | Alloy Steel, Aluminum, Glass, Metal (Perimeter structure in mirror stainless steel, Lateral diffuser in matte finish prismoptic, Reflector in polished aluminum, Front diffuser in engraved transparent methacrylate) |
| Finish Type | Matte Finish, Polished |
| Color | Black |
| Product Dimensions | 0.01"D x 0.01"W x 0.01"H (Note: These dimensions appear to be placeholder values. Please refer to product packaging or official Artemide documentation for accurate measurements.) |
| Item Weight | 0.16 ounces (Note: This weight appears to be a placeholder value. Please refer to product packaging or official Artemide documentation for accurate weight.) |
| Indoor/Outdoor Usage | Indoor |
Warranty and Support
For warranty information, technical support, or service inquiries, please contact Artemide customer service. Keep your purchase receipt and model number (USC-1833035A) readily available.
Visit the official Artemide website for the most up-to-date support information: www.artemide.com
