CalExotics SE-0649-15-3

CalExotics Enchanted Bunny Massager - User Manual

Model: SE-0649-15-3

1. Introduction

Thank you for choosing the CalExotics Enchanted Bunny Massager. This manual provides essential information for the safe and effective use of your device. Please read it thoroughly before first use and retain it for future reference.

The Enchanted Bunny Massager is designed for personal use, featuring a unique combination of rotating beads and independent vibration functions to enhance your experience.

2. Safety Information

  • This product is intended for adult use only.
  • Do not use if the product appears damaged or defective.
  • Discontinue use immediately if you experience any discomfort or pain.
  • Consult a healthcare professional if you have any medical concerns or conditions before using this product.
  • Keep out of reach of children.
  • Store in a clean, dry place away from direct sunlight and extreme temperatures.

3. Setup and Charging

3.1 Initial Charge

Before first use, fully charge your Enchanted Bunny Massager. The device is USB rechargeable and includes a charging cord.

  1. Locate the charging port on the device.
  2. Connect the included USB charging cord to the device and to a standard USB power source (e.g., computer, USB wall adapter).
  3. The LED light will flash while charging. A complete charge typically takes 2 hours.
  4. The LED light will glow solid when fully charged.

A full charge provides approximately 65 minutes of use on high speed and 80 minutes on low speed.

CalExotics Enchanted Bunny Massager connected to a USB charging cable, with the cable plugged into a laptop. The device is purple with a silver control panel.

Figure 1: USB Charging Connection

4. Operation

The Enchanted Bunny Massager features easy push-button controls for various functions.

Close-up of the CalExotics Enchanted Bunny Massager showing the control panel with three buttons: power, and two wave-patterned buttons for function control. The device is purple with a silver trim.

Figure 2: Control Panel

4.1 Power On/Off

  • To turn on: Press and hold the power button (circular button with a vertical line) for 2 seconds.
  • To turn off: Press and hold the power button for 2 seconds.

4.2 Function Control

The device offers two main types of stimulation: rotating beads in the shaft and independent vibration in the stimulator (teaser).

  • Rotating Beaded Shaft: The shaft features 4 functions of rotating beaded action. Use the wave-patterned buttons to cycle through these functions.
  • Independent Vibration: The stimulator (teaser) offers 12 functions of independent vibration, pulsation, and escalation. Use the other wave-patterned button to cycle through these functions.
  • Memory Chip: The device includes a memory chip that resumes on the last function used when powered on again.
The CalExotics Enchanted Bunny Massager, purple in color, showing its full length and the rabbit-ear shaped stimulator. The image also highlights the rotating beaded shaft and the control panel.

Figure 3: Product Overview with Features

4.3 Video Demonstration

Video 1: CalExotics Enchanted Bunny Product Features. This video demonstrates the various functions and features of the Enchanted Bunny Massager, including its independent vibration modes and rotating beaded shaft.

5. Care and Maintenance

5.1 Cleaning

  • Clean the device thoroughly before and after each use.
  • Wash with warm water and a mild soap or a specialized toy cleaner.
  • Rinse thoroughly and pat dry with a lint-free cloth.
  • The device is waterproof and can be used in or out of water.
The back of the CalExotics Enchanted Bunny Massager packaging, highlighting features like 12 independent functions, memory chip, body-safe silicone, and waterproof design.

Figure 4: Packaging highlighting waterproof feature and other details.

5.2 Storage

Store the massager in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid storing with other toys made of different materials to prevent material degradation.

6. Troubleshooting

ProblemPossible CauseSolution
Device does not turn on.Battery is depleted.Charge the device fully (approximately 2 hours). Ensure the charging cable is securely connected.
Functions are weak or inconsistent.Low battery.Recharge the device.
Device stops working unexpectedly.Battery depleted or internal malfunction.Charge the device. If the issue persists after charging, contact customer support.

7. Specifications

  • Model Number: SE-0649-15-3
  • Brand: CalExotics
  • Material: Silicone, ABS Plastic Metallic Plating
  • Color: Purple
  • Dimensions: 1.75 x 4 x 11 inches (L x W x H)
  • Weight: 11.8 ounces
  • Battery: 1 Lithium Polymer battery (included)
  • Charging: USB Rechargeable (cord included)
  • Charge Time: Approximately 2 hours
  • Run Time: 65 minutes (high speed), 80 minutes (low speed)
  • Functions: 4 rotating shaft functions, 12 independent stimulator vibration functions
  • Waterproof: Yes

8. Warranty and Support

The CalExotics Enchanted Bunny Massager comes with a 1-year manufacturer warranty. For warranty claims, technical support, or any questions regarding your product, please contact CalExotics customer service.

Please refer to the official CalExotics website or your purchase documentation for the most up-to-date contact information and warranty details.

© 2024 CalExotics. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.