1. Introduction
Thank you for purchasing the RCA HSB5812 Soundbar. This manual provides essential information for setting up, operating, and maintaining your new soundbar. Please read this manual thoroughly before use to ensure proper functionality and to maximize your listening experience. Keep this manual for future reference.
2. Product Overview
2.1 Key Features
- Bluetooth Connectivity
- 40 Watts RMS Output Power
- Auxiliary 3.5mm Input
- FM Radio Functionality
- Digital Optical Output
2.2 Included Components
- RCA HSB5812 Soundbar
- Remote Control
2.3 Product View
This image displays the RCA HSB5812 Soundbar in a piano black finish. The front panel features a digital display showing '328', indicating a setting or status. The RCA logo is visible on the left side. The soundbar has a sleek, elongated design.
3. Setup
3.1 Placement
Place the soundbar on a stable, flat surface, such as a TV stand or shelf, directly in front of your television for optimal sound dispersion. Ensure there are no obstructions blocking the front of the soundbar.
3.2 Power Connection
- Connect the AC power cord to the power input on the back of the soundbar.
- Plug the other end of the power cord into a wall outlet.
3.3 Audio Connections
Choose one of the following methods to connect your audio source:
- Optical Digital Input: Connect an optical cable (not included) from your TV or other audio source's optical output to the OPTICAL IN port on the soundbar. This provides high-quality digital audio.
- Auxiliary 3.5mm Input: Connect a 3.5mm audio cable (not included) from your device's headphone jack or audio output to the AUX IN port on the soundbar.
- Bluetooth: For wireless connection, refer to section 4.1 for Bluetooth pairing instructions.
4. Operating Instructions
4.1 Power On/Off
Press the POWER button on the remote control or on the soundbar to turn the unit on or off.
4.2 Input Selection
Press the INPUT button on the remote control or on the soundbar repeatedly to cycle through the available input sources: Bluetooth, AUX, OPTICAL, FM.
4.3 Volume Control
Use the VOL+ and VOL- buttons on the remote control or on the soundbar to adjust the volume level.
4.4 Bluetooth Pairing
- Turn on the soundbar and select the Bluetooth input mode. The display will show 'BT' and flash, indicating it is in pairing mode.
- Enable Bluetooth on your mobile device (smartphone, tablet, etc.) and search for available devices.
- Select 'RCA HSB5812' from the list of devices.
- Once paired, the soundbar will emit a confirmation tone, and the 'BT' indicator will stop flashing. You can now play audio from your device through the soundbar.
4.5 FM Radio Operation
- Select FM input mode using the INPUT button.
- Press the PLAY/PAUSE button to automatically scan and save available FM stations.
- Use the PREV/NEXT buttons to navigate through the saved stations.
5. Maintenance
5.1 Cleaning
To clean the soundbar, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the finish. Ensure the soundbar is unplugged before cleaning.
5.2 Storage
If storing the soundbar for an extended period, unplug it from the power outlet and store it in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Troubleshooting
If you encounter issues with your soundbar, please refer to the following common problems and solutions:
- No Power:
Ensure the power cord is securely connected to both the soundbar and a working wall outlet. Try plugging another device into the same outlet to confirm it has power. - No Sound:
Check that the soundbar is powered on and the volume is not muted or set too low. Verify that the correct input source is selected (Bluetooth, AUX, OPTICAL). Ensure all audio cables are securely connected. If using optical, confirm your TV's audio output is set to PCM. - Bluetooth Not Connecting:
Ensure the soundbar is in Bluetooth pairing mode (BT flashing). Make sure your device's Bluetooth is enabled and within range (typically 10 meters). Try unpairing and re-pairing the device. Disconnect any other Bluetooth devices from the soundbar. - Remote Control Not Working:
Check the battery in the remote control and replace it if necessary. Ensure there are no obstructions between the remote and the soundbar's sensor.
If the problem persists after trying these solutions, please contact customer support.
7. Specifications
| Specification | Value |
|---|---|
| Model Name | HSB5812 |
| Speaker Type | Surround Sound |
| Special Feature | Bluetooth |
| Compatible Devices | Laptop, MP3 Player, Smartphone, Tablet, Television |
| Surround Sound Channel Configuration | 2.0 |
| Color | Piano Black |
| Included Components | Soundbar, Remote Control |
| Product Weight | 10 kg |
| Warranty Type | Limited |
| Number of Items | 1 |
| Control Method | Remote Control |
| Wireless Communication Technology | Bluetooth |
| Power Source | AC |
| Manufacturer | Rca |
| Part Number | HSB5812 |
| Remote Control Description | remote_control |
| Speaker Connectivity | Bluetooth, RCA, Optical |
| Average Battery Life (Remote) | 5 Hours |
| Batteries Included | No |
| Batteries Required | No |
| Product Dimensions | 87 x 8 x 5 cm |
| Maximum Speaker Output Power | 40 Watts |
| Connectivity Technology | Auxiliary, Bluetooth, RCA |
| Audio Output Mode | Stereo |
| Mounting Type | Tabletop Mount |
8. Warranty and Support
8.1 Warranty Information
This product comes with a Limited Warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. Retain your proof of purchase for warranty claims.
8.2 Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact RCA customer support. Contact information can typically be found on the product packaging or the official RCA website.
