1. Important Safety Information
WARNING: Risk of electric shock. Disconnect power at the main circuit breaker panel or main fuse box before installation or servicing. Failure to do so may result in serious injury or property damage.
Always ensure wiring is safely disconnected from power before beginning any work on the fixture. Use a non-contact voltage tester to confirm power is off.
Consult a qualified electrician if you have any doubts or questions regarding the installation process or if your home's wiring does not match standard black and white wires.
Please check your local laws and electrical codes before installing this product.
2. Product Overview
The Kichler Shailene 18-inch 3-Light Square Semi-Flush Ceiling Light (Model 43693NI) is designed to provide ambient lighting. It features a brushed nickel finish with a satin etched white diffuser and a white microfiber shade.
Figure 2.1: Kichler Shailene Semi-Flush Ceiling Light, Model 43693NI.
Figure 2.2: Product dimensions showing 18 inches width and 11 inches height.
3. What's in the Box
Carefully unpack all components and check against the list below. Ensure all parts are present before discarding packaging materials.
- (1) Mounting Strap
- Strap Mounting Screws
- Mounting Screws
- Lockwasher
- Lock up Knobs
- Wire Nuts
- Trim
- Finial
- Bead Pipe
- (1) Shade(s)
- Bulb(s) (not included)
4. Tools Required (Not Included)
The following tools are recommended for safe and efficient installation:
- Step Ladder
- Phillips Head Screwdriver
- Flat Head Screwdriver
- Wire Strippers/Pliers
- Non-Contact Voltage Tester
- Safety Glasses (recommended)
5. Installation Instructions
Follow these steps carefully to install your Kichler Shailene semi-flush ceiling light. It is recommended to have an additional person for assistance during installation, especially when lifting the fixture.
5.1. Prepare for Installation
- Disconnect Power: Locate the main circuit breaker panel or fuse box and turn off the power to the circuit where you will be installing the light fixture.
- Verify Power is Off: Use a non-contact voltage tester to ensure that the wiring at the ceiling junction box is safely disconnected from power.
- Remove Existing Fixture: Carefully remove any existing light fixture from the ceiling. Disconnect all wires and remove the old mounting bracket.
- Review Instructions: Keep the printed instructions provided with your fixture close by for specific details, as each fixture may have unique instructions.
5.2. Mount the Fixture
- Attach Mounting Bracket: Secure the new mounting bracket to the junction box on your ceiling using the provided mounting screws. Ensure it is firmly attached.
- Prepare Wires: If necessary, cut excess wiring from the fixture, leaving a minimum of 6 inches from the top of the canopy for connections. Strip approximately 3/4 inch of insulation from the ends of the wires.
- Connect Ground Wire: Connect the bare copper ground wire from the fixture to the ground wire from the junction box (usually bare copper or green) using a wire nut. Secure the ground wire to the mounting bracket's ground screw.
- Connect Supply Wires:
- Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Tuck Wires: Carefully tuck all connected wires into the junction box, ensuring they are not pinched.
- Secure Canopy: Raise the fixture's canopy to the ceiling and secure it to the mounting bracket using the provided lock up knobs or finial.
5.3. Final Assembly
- Install Bulbs: Carefully screw the appropriate light bulbs (E26 Medium base, up to 75W equivalent) into the sockets.
- Attach Shade: Secure the satin etched white diffuser and white microfiber shade to the fixture according to the specific instructions for your model.
5.4. Restore Power
- Turn Power On: Return to the main circuit breaker panel or fuse box and restore power to the circuit.
- Test Fixture: Turn on the wall switch to test your new Kichler Shailene semi-flush ceiling light.
5.5. Installation Video Guide
For a visual guide on installing Kichler semi-flush and flush mount fixtures, please refer to the video below. Note that specific steps may vary slightly depending on your fixture model.
Video: How to Install Kichler Semi Flush and Flush Mounts at Home. This video provides general installation guidelines; always refer to your specific product's printed instructions.
6. Operation
The Kichler Shailene semi-flush ceiling light operates via a standard wall switch. Ensure the switch is in the "ON" position for the light to function. If using a dimmer switch, ensure it is compatible with the type of bulbs installed.
7. Maintenance
Regular cleaning will help maintain the appearance and performance of your fixture.
- Before Cleaning: Always ensure the electric current is turned off at the circuit breaker before cleaning any part of the fixture.
- Metal Components: Clean metal components with a soft cloth moistened with a mild liquid soap solution. Wipe clean and buff with a very soft dry cloth to prevent water spots or streaks.
- Shade and Diffuser: For the satin etched white diffuser and white microfiber shade, use a dry, soft cloth to gently wipe away dust. For more stubborn marks, a slightly damp cloth with plain water may be used, followed by immediate drying. Avoid abrasive cleaners or harsh chemicals.
- Bulb Replacement: When replacing bulbs, ensure the power is off. Allow bulbs to cool completely before handling. Use E26 Medium base bulbs, up to 75W equivalent.
8. Troubleshooting
If your Kichler Shailene light fixture is not functioning correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check the circuit breaker and wall switch. Ensure power is restored. |
| Light does not turn on. | Loose or incorrect wiring connections. | Turn off power at the breaker. Recheck all wire connections (black to black, white to white, ground to ground). Ensure wire nuts are secure. |
| Light does not turn on. | Faulty bulb. | Replace the bulb(s) with new, working ones of the correct type and wattage. |
| Light flickers. | Loose bulb or wiring. | Ensure bulbs are screwed in tightly. Check wire connections at the junction box (with power off). |
| Light is dim. | Incorrect bulb wattage or type. | Ensure bulbs meet the specified wattage (up to 75W equivalent) and are fully functional. |
If these steps do not resolve the issue, contact a qualified electrician or Kichler customer support for further assistance.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Kichler |
| Model Name | Shailene |
| Model Number | 43693NI |
| Product Dimensions | 18"L x 18"W x 11"H |
| Number of Light Sources | 3 |
| Bulb Base | E26 Medium |
| Max Wattage (per bulb) | 75 watts equivalent |
| Voltage | 120 Volts |
| Fixture Material | Alloy Steel |
| Shade Material | Glass, Microfiber |
| Finish Type | Brushed Nickel |
| Shade Color | White |
| Installation Type | Semi Flush Mount |
| Indoor/Outdoor Usage | Indoor |
| Item Weight | 6.8 Pounds |
10. Warranty and Support
This Kichler Shailene fixture comes with a 1-year limited warranty. This warranty covers defects in materials and workmanship under normal use and service.
For warranty claims, technical support, or additional information, please contact Kichler customer service. Refer to the official Kichler website or your purchase documentation for the most current contact details.
Kichler Website: www.kichler.com
