AMOCAM Electric Electronic Door Lock Model SJ1073 User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your AMOCAM Model SJ1073 Electric Electronic Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Safety Information

• Ensure all power is disconnected before installation or maintenance to prevent electrical shock.
• Use only the specified 12V DC power supply.
• Do not attempt to disassemble or modify the lock. This may void the warranty and compromise security.
• Keep keys in a secure location and do not leave them unattended.
• Consult a qualified electrician or locksmith if you are unsure about any part of the installation process.

Package Contents

Verify that all items are present in the package:

• 1 x AMOCAM Metal Electronic Control Lock
• 3 x Keys
• 1 x Door Rim
• 1 x Installation Package (screws and mounting hardware)

Image: All components of the AMOCAM Electronic Control Lock, including the main lock body, door rim, and keys.

Product Features

• Fail-Secure Operation: The lock unlocks when power is supplied and remains locked when power is absent, ensuring security during power outages.
• Durable Construction: Made from stainless steel with wire drawing processing for anti-corrosion properties, featuring a solid brass deadbolt and roller tongue.
• Versatile Compatibility: Suitable for various door types including wooden, metal, and fireproof doors. Can be installed on both left and right-hand doors by rotating the lock 180 degrees.
• Multiple Unlocking Methods: Supports electric control, manual knob operation, and traditional key unlocking.
• Low Power Consumption: Designed for static electricity power consumption, contributing to a long service life.
• Integrated Security: Features an electronic anti-theft mechanism and a reliable locking system tested for up to 1,000,000 cycles.
• Intercom System Integration: Easily connects to video intercom doorbell systems and other electric access control systems via a 2-wire connection.

Specifications

Image: Detailed dimensions of the AMOCAM Electronic Control Lock, showing length, width, and height measurements.

Installation Guide

This section outlines the steps for installing the AMOCAM Model SJ1073 Electric Electronic Door Lock. Ensure you have all necessary tools and components before beginning.

1. Prepare the Door

The lock is suitable for wooden, metal, and fireproof doors. Determine the desired mounting location on your door frame and door. The lock can be rotated 180 degrees to accommodate both left and right-hand opening doors.

Image: Examples of the AMOCAM Electronic Control Lock installed on a wooden door and a metal/fireproof door.

2. Mount the Main Lock Body

1. Position the main lock body on the door at the desired height.
2. Mark the screw holes and the opening for the lock tongue.
3. Drill pilot holes for the screws and create the necessary opening for the lock mechanism.
4. Secure the main lock body to the door using the provided screws from the installation package.

Image: The main unit of the AMOCAM Electronic Control Lock, showing its robust stainless steel construction.

3. Install the Door Rim (Strike Plate)

1. Align the door rim (strike plate) with the main lock body on the door frame, ensuring proper engagement with the lock tongue.
2. Mark the screw holes for the door rim.
3. Drill pilot holes and secure the door rim to the door frame using the provided screws.
4. Test the alignment by closing the door and checking if the lock tongue smoothly enters the door rim. Adjust if necessary.

Image: Side view of the AMOCAM Electronic Control Lock, showing the lock body and the door rim in a closed position.

4. Wiring the Lock

The AMOCAM SJ1073 lock requires a 12V DC power supply. It can be connected to a video intercom doorbell system or other access control systems.

• Locate the two-wire connection points on the back of the lock.
• Connect these wires to your 12V DC power source or the appropriate terminals on your video intercom/access control system.
• Ensure correct polarity if specified by your power source or system.
• Secure all wiring connections and insulate them properly.

Image: Back view of the AMOCAM Electronic Control Lock, showing the wiring terminals and mounting points.

5. Final Testing

1. Apply power to the lock.
2. Test the electric unlock function via your intercom or access control system. The lock should retract when power is applied.
3. Test the manual knob operation from the inside.
4. Test unlocking with the physical keys from the outside.
5. Ensure the door locks securely when closed and power is removed (Fail-Secure mode).

Operation

The AMOCAM Model SJ1073 Electric Electronic Door Lock offers multiple ways to operate:

• Electric Control: When connected to a video intercom or access control system, the lock can be electronically unlocked by activating the system. The lock will retract, allowing the door to be opened.
• Manual Knob: From the inside, turn the manual knob to retract the lock and open the door.
• Key Operation: From the outside, insert one of the provided keys into the keyhole and turn it to unlock the door.

Note: This lock operates in Fail-Secure mode. It will remain locked without power and unlock when power is applied. This ensures security in case of a power failure.

Maintenance

Regular maintenance helps ensure the longevity and reliable operation of your AMOCAM Electric Electronic Door Lock:

• Cleaning: Wipe the lock body with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
• Lubrication: Periodically apply a small amount of graphite lubricant to the keyhole and moving parts of the lock mechanism to ensure smooth operation. Do not use oil-based lubricants as they can attract dust.
• Check Connections: Periodically inspect all wiring connections to ensure they are secure and free from corrosion.
• Functionality Test: Regularly test all unlocking methods (electric, knob, key) to confirm they are working correctly.
• Alignment: Check the alignment between the lock body and the door rim. Misalignment can cause excessive wear and affect performance.

Troubleshooting

Warranty and Support

AMOCAM products are designed for reliability and durability. For warranty information and technical support, please refer to the official AMOCAM website or contact your retailer.

For further assistance, you may visit the AMOCAM Store on Amazon.