Introduction
Welcome to the user manual for your Redragon Mitra K551RGB-1 Mechanical Gaming Keyboard. This guide provides essential information for setting up, operating, maintaining, and troubleshooting your new device. Please read this manual thoroughly to ensure optimal performance and longevity of your keyboard.
Setup
1. Unpacking
Carefully remove the keyboard and all accessories from its packaging. Ensure no components are missing or damaged.
2. Connecting the Keyboard
Locate the USB-A connector on the keyboard cable. Plug the USB-A connector into an available USB port on your computer. The keyboard is plug-and-play, meaning it should be recognized automatically by your operating system without additional driver installation.
Image: Top view of the Redragon Mitra K551RGB-1 keyboard with its integrated USB-A cable, ready for connection.
3. Physical Placement
Place the keyboard on a stable, flat surface. You can adjust the tilt of the keyboard using the foldable feet located on the underside for improved ergonomic comfort.
Image: Bottom view of the Redragon Mitra K551RGB-1 keyboard, highlighting the foldable feet for angle adjustment.
Operating Instructions
1. Basic Keyboard Functions
The Redragon Mitra K551RGB-1 features a standard ABNT-2 QWERTY layout with 107 keys, providing full functionality for typing and gaming.
Image: Top-down view of the Redragon Mitra K551RGB-1 keyboard, showcasing its full layout and active RGB backlighting.
2. RGB Backlighting Control
The keyboard's RGB backlighting can be customized directly from the keyboard. The official software may not be functional, so use the following key combinations:
- Fn + Insert: Cycle through various preset lighting modes.
- Fn + Home: Activate or change static color modes.
- Fn + Page Up / Page Down: Adjust the brightness level of the backlighting.
- Fn + Left Arrow / Right Arrow: Adjust the speed of dynamic lighting effects.
- Fn + Up Arrow / Down Arrow: Adjust the direction or intensity of certain lighting effects.
Image: Angled view of the Redragon Mitra K551RGB-1 keyboard, demonstrating the vibrant RGB lighting effects.
3. Multimedia Keys
Access multimedia functions by pressing the Fn key in combination with the corresponding F-keys (F1-F12). Refer to the keycap legends for specific functions such as volume control, media playback, and more.
4. Anti-Ghosting
The Redragon Mitra K551RGB-1 features full N-key rollover (NKRO) with anti-ghosting on all 107 keys, ensuring that every keystroke is registered accurately, even during intense gaming sessions.
Maintenance
1. Cleaning
- Surface Cleaning: Use a soft, dry, lint-free cloth to wipe down the keyboard surface. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the keyboard.
- Keycap Cleaning: For deeper cleaning, keycaps can be carefully removed using a keycap puller (not included) and cleaned with water and mild soap. Ensure keycaps are completely dry before reattaching.
- Under Keycaps: Use compressed air to remove dust and debris from underneath the keycaps.
2. Switch Replacement
The Redragon Mitra K551RGB-1 features hot-swappable Outemu Red mechanical switches. If a switch becomes faulty, you can replace it without soldering:
- Carefully remove the keycap using a keycap puller.
- Use a switch puller (not included) to gently grip the top and bottom clips of the switch and pull it straight up.
- Align the pins of the new Outemu Red switch with the holes on the PCB and press it firmly into place until it clicks.
- Reattach the keycap.
3. Cable Management
Avoid sharp bends or excessive pulling on the USB cable to prevent damage. Use the included cable tie to manage excess cable length.
Troubleshooting
- Keyboard Not Responding:
- Ensure the USB cable is securely connected to both the keyboard and the computer.
- Try plugging the keyboard into a different USB port on your computer.
- Restart your computer.
- Test the keyboard on another computer to rule out a system-specific issue.
- Specific Keys Not Working:
- If the keyboard is hot-swappable, try replacing the faulty switch with a spare one.
- Clean around and under the affected keycap to remove any debris.
- RGB Lighting Issues:
- Ensure the brightness is not set to the minimum level (Fn + Page Up/Down).
- Cycle through different lighting modes (Fn + Insert) to see if the issue persists across modes.
Specifications
| Brand | Redragon |
| Model | K551RGB-1 |
| Connectivity Technology | USB-A |
| Keyboard Type | Mechanical |
| Switch Type | Outemu Red (Linear) |
| Keyboard Layout | ABNT-2 (QWERTY) |
| Backlighting | RGB |
| Number of Keys | 107 |
| Material | ABS Plastic |
| Dimensions (LxWxH) | 43 cm x 12.5 cm x 4 cm |
| Item Weight | 1.26 kg |
| Compatible Devices | PC, Notebook |
Warranty and Support
1. Warranty Information
The Redragon Mitra K551RGB-1 Mechanical Gaming Keyboard comes with a 12-month manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
2. Customer Support
For technical assistance, warranty claims, or any other inquiries regarding your Redragon product, please contact Redragon customer service. Visit the official Redragon website for contact information and support resources.
