Fischer & Honsel Sten 30702 Dimmable LED Reading Lamp User Manual

Introduction

Thank you for choosing the Fischer & Honsel Sten 30702 Dimmable LED Reading Lamp. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lamp. Please read these instructions carefully before use and retain them for future reference.

Figure 1: Front view of the Sten 30702 Dimmable LED Reading Lamp.

Safety Instructions

• Ensure the power supply is disconnected before installation or maintenance.
• This product is designed for indoor use only.
• Do not attempt to modify or repair the lamp yourself. Contact qualified personnel for service.
• Keep the lamp away from water and high humidity environments.
• Do not look directly into the LED light source for extended periods.
• Use only the specified voltage (230V ~ 50Hz) for operation.

Package Contents

Verify that all components are present before proceeding with installation:

• Sten 30702 Dimmable LED Reading Lamp (with integrated LED module)
• Wall mounting bracket
• Mounting hardware (screws, wall plugs)
• User Manual (this document)

Setup and Installation

The Sten 30702 lamp is designed for wall mounting, ideal for placement near beds or furniture.

1. Choose a Location: Select a suitable indoor location for mounting, ensuring it is within reach of a power outlet. The lamp has a flexible arm with a reach of approximately 45 cm.
2. Mark Drilling Points: Hold the wall mounting bracket against the desired surface and mark the positions for drilling. Ensure the bracket is level.
3. Drill Holes: Drill holes at the marked positions using an appropriate drill bit for your wall type. Insert wall plugs if necessary.
4. Attach Bracket: Secure the wall mounting bracket to the wall using the provided screws.
5. Mount Lamp: Attach the lamp body to the secured wall bracket. Ensure it is firmly seated.
6. Connect Power: Plug the lamp's power cord into a standard 230V ~ 50Hz electrical outlet.

Figure 2: Illustration of the wall mounting process.

Figure 3: Lamp dimensions, indicating a flexible arm reach of approximately 45 cm and a total height of 48 cm.

Operating Instructions

The Sten 30702 lamp features intuitive gesture control for power and dimming.

• Power On/Off: Wave your hand briefly in front of the sensor located on the lamp head to turn the light on or off.
• Dimming: To adjust the brightness, hold your hand steadily in front of the sensor. The light will gradually dim or brighten. Remove your hand when the desired brightness level is reached. The lamp offers continuous dimming.
• Adjusting Position: The flexible gooseneck arm allows you to direct the light precisely where needed. Gently bend the arm to adjust the lamp head's position.

Figure 4: Demonstrating gesture control for adjusting light intensity.

Maintenance

• Cleaning: Disconnect the lamp from the power supply before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
• LED Module: The LED module is integrated and not user-replaceable. Its long lifespan ensures years of maintenance-free operation.
• Inspection: Periodically check the power cord and connections for any signs of damage. If damage is found, discontinue use and contact customer support.

Troubleshooting

Specifications

Figure 5: EU Energy Label for the Sten 30702 lamp. For more details, visit eprel.ec.europa.eu/qr/991502.

Warranty and Support

Fischer & Honsel products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact your retailer.

If you encounter any issues or have questions regarding your Sten 30702 lamp that are not covered in this manual, please contact Fischer & Honsel customer support or your authorized dealer for assistance.