1. Introduction
This manual provides detailed instructions for the safe and effective use of your GODOX QS600II Studio Strobe Flash Light. The QS600II series is designed for professional photography applications, offering high performance and comprehensive functions for various lighting effects. Please read this manual thoroughly before operation to ensure proper usage and to prevent damage to the unit or injury.
Image 1.1: GODOX QS600II Studio Strobe Flash Light with included reflector and cleaning cloth.
2. Product Overview
The GODOX QS600II is a high-speed studio flash featuring a robust design and advanced technology. It is suitable for wedding, advertisement, portrait, and fashion photography.
Key Features:
- High Power Output: 600Ws for powerful illumination.
- Built-in Godox 2.4G Wireless X System: Enables wireless control of flash power, modeling lamp, and triggering.
- Fast Recycling Time: 0.3 to 1.5 seconds for rapid shooting.
- Short Flash Duration: 1/2000 to 1/800 seconds for freezing motion.
- Precise Power Adjustment: 50 steps from 1/32 to 1/1 in 0.1 increments.
- 150W Modeling Lamp: Steplessly adjustable from 5% to 100%.
- Multiple Slave Trigger Modes: OFF, S1, and S2 for synchronization with various camera pre-flash systems.
- Bowens Mount: Compatible with a wide range of light modifiers.
- Stable Color Temperature: 5600±200K.
Component Identification:
Image 2.1: Detailed view of the GODOX QS600II components and control panel.
- Flash Tube: Emits the main flash light.
- Modeling Bulb: Provides continuous light for previewing lighting effects.
- Glass Protective Cover: Protects the flash tube and modeling bulb.
- Bowens Mount: Standard mount for attaching light modifiers like reflectors, softboxes, and beauty dishes.
- Reflector: Directs and shapes the light output.
- Light Control Receiver: Detects optical slave triggers.
- Direction Adjusting Handle: Allows for tilting and positioning the flash head.
- Control Panel: Features an LCD display and buttons for adjusting settings.
Image 2.2: Examples of Bowens mount accessories compatible with the QS600II.
3. Setup
Follow these steps to set up your GODOX QS600II Studio Strobe Flash Light:
- Mounting: Securely attach the flash unit to a sturdy light stand using the mounting bracket and tightening knob.
- Attach Reflector/Modifier: Align the desired light modifier (e.g., standard reflector) with the Bowens mount on the front of the flash head. Rotate it clockwise until it locks into place.
- Install Modeling Lamp: Carefully insert the 150W modeling bulb into its socket. Ensure it is seated correctly.
- Connect Power: Plug the power cord into the flash unit's power input, then connect the other end to a suitable AC power outlet.
- Power On: Press the power button on the control panel to turn on the unit.
Image 3.1: Contents included in the GODOX QS600II package.
4. Operating Instructions
The QS600II offers various modes and controls for precise lighting adjustments.
Control Panel and LCD Display:
Image 4.1: The control panel and LCD display of the QS600II.
- LCD Panel: Provides a clear display of current settings, including power output, channel, group, and slave mode.
- Power Adjustment Dial: Rotate to increase or decrease flash power output.
- CH/GR Button: Press to switch between channel and group settings.
- BUZZ Button: Toggles the audible flash ready indicator.
- MOD/OFF Button: Controls the modeling lamp (on/off, proportional, percentage).
- S1/S2 Button: Selects the slave trigger mode.
- TEST Button: Fires a test flash.
Power Adjustment:
The flash power can be adjusted from 1/32 to 1/1 in 50 steps, with 0.1 increments. Use the adjustment dial to set the desired power level. The LCD panel will display the current power setting.
Image 4.2: LCD panel displaying flash power adjustment and modeling lamp settings.
Modeling Lamp Control:
The 150W modeling lamp can be adjusted from 5% to 100% output. Press the MOD/OFF button to cycle through modes: OFF, PROPORTIONAL (power output linked to flash power), and PERCENTAGE (manual adjustment). Use the adjustment dial to set the percentage in manual mode.
Wireless Control (Godox 2.4G Wireless X System):
The QS600II has a built-in Godox 2.4G Wireless X System. This allows for wireless control of the flash unit's power output, modeling lamp, and buzzer using compatible Godox transmitters such as the X1, X2T, XT16, or FT16. The system supports 32 channels and 16 groups.
Image 4.3: Wireless control of the QS600II using a Godox X-series transmitter.
Slave Trigger Modes:
The unit features three slave trigger modes: OFF, S1, and S2. These modes allow the flash to synchronize with cameras that have a single pre-flash firing system.
- S1 Mode: The flash will fire in response to the first flash from a master unit. This is suitable for manual flash or TTL flash systems without a pre-flash.
- S2 Mode: The flash will ignore a single pre-flash from a master unit and fire in response to the main flash. This is suitable for TTL flash systems that emit a pre-flash for exposure measurement.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your GODOX QS600II Studio Strobe Flash Light.
- Cleaning: Regularly clean the exterior of the unit with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Do not use harsh chemicals or abrasive cleaners.
- Flash Tube and Modeling Lamp: Handle these components with care. Avoid touching the glass surfaces directly with bare hands, as oils can reduce their lifespan. If necessary, clean with a lint-free cloth and alcohol.
- Storage: When not in use, store the flash unit in a dry, dust-free environment. Disconnect it from power and allow it to cool completely before storing.
- Ventilation: Ensure the ventilation holes are not obstructed during operation to prevent overheating.
6. Troubleshooting
If you encounter issues with your GODOX QS600II, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Flash does not fire | Unit not powered on; Trigger not connected or faulty; Incorrect trigger settings (channel/group); Flash tube faulty; Overheating protection activated. | Ensure power is on. Check trigger connection and battery. Verify channel and group settings match. Replace flash tube if necessary. Allow unit to cool down. |
| Modeling lamp does not light up | Lamp faulty; Modeling lamp mode set to OFF; Power issue. | Replace modeling lamp. Press MOD/OFF button to cycle through modes. Check power connection. |
| Inconsistent flash output | Low battery in trigger; Flash tube nearing end of life; Power fluctuations. | Replace trigger batteries. Consider replacing flash tube. Ensure stable power supply. |
| Wireless trigger not connecting | Incorrect channel/group settings; Trigger out of range; Interference. | Verify channel and group settings on both flash and trigger. Move trigger closer to flash. Change channel to avoid interference. |
If the problem persists after attempting these solutions, please contact GODOX customer support or your retailer for further assistance.
7. Specifications
| Feature | Specification |
|---|---|
| Model | QS600II |
| Flash Output | 600Ws |
| Recycling Time | 0.3 - 1.5 seconds |
| Flash Duration | 1/2000 - 1/800 seconds |
| Color Temperature | 5600±200K |
| Power Adjustment | 50 steps (1/32 - 1/1) in 0.1 increments |
| Modeling Lamp | 150W, adjustable 5% - 100% |
| Wireless System | Built-in Godox 2.4G Wireless X System |
| Channels/Groups | 32 Channels / 16 Groups |
| Slave Modes | OFF, S1, S2 |
| Mount Type | Bowens Mount |
| Product Dimensions | 18.75 x 11 x 8.75 inches |
| Item Weight | 10.12 pounds |
8. What's in the Box
The GODOX QS600II Studio Strobe Flash Light package typically includes the following items:
- GODOX QS600II Flash Head x1
- Standard Reflector x1
- Glass Protective Cover x1
- Protection Case x1
- 150W Modeling Bulb x1
- Charger/Power Cord (UK/EU/US Plug) x1
9. Warranty and Support
Specific warranty details for the GODOX QS600II Studio Strobe Flash Light are not provided in this document. Please refer to the warranty card included with your product or visit the official GODOX website for detailed warranty information and terms.
For technical support, service, or inquiries, please contact your authorized GODOX dealer or GODOX customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
