VASAGLE HSR40B Coat Rack Hall Tree Instruction Manual

1. Introduction

Welcome to your new VASAGLE HSR40B Coat Rack Hall Tree. This manual provides detailed instructions for assembly, operation, and maintenance to ensure safe and efficient use of your product. Please read through these instructions carefully before beginning assembly and retain this manual for future reference.

Image 1.1: The VASAGLE HSR40B Coat Rack Hall Tree in a home entryway, showcasing its design and functionality.

2. Product Components

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

Parts List:

• A x 2 (Side Frames)
• B x 2 (Wire Shelves)
• C x 2 (Top Horizontal Bars)
• D x 1 (Bench Board)
• E x 2 (Lower Horizontal Bars)
• F x 2 (Upper Side Bars)
• G x 1 (Top Hanging Rail)
• H x 2 (Hook Boards)

Hardware List:

• I x 9 (Removable Hooks)
• J x 4 (Adjustable Feet)
• K x 12 (Long Screws for Frame)
• L x 8 (Screws for Hook Boards)
• M x 8 (Small Screws for Bench Board)
• N x 8 (Screws for Upper Side Bars)
• O x 2 (Anti-tipping Kit)
• P x 1 (Hex Key)

3. Setup and Assembly

Follow these steps to assemble your VASAGLE HSR40B Coat Rack Hall Tree. Refer to Video 2.1 for visual guidance.

Step 1: Assemble the Base Frame

• Attach the adjustable feet (J) to the bottom of the side frames (A). (Refer to Video 2.1, 0:09)
• Connect the two wire shelves (B) to the side frames (A) using screws (K) and the hex key (P). Ensure the shelves are securely fastened. (Refer to Video 2.1, 0:25)

Step 2: Attach the Bench Board

• Secure the bench board (D) to the top of the assembled base frame using screws (M) and the hex key (P). (Refer to Video 2.1, 0:55)

Step 3: Assemble the Upper Frame

• Connect the lower horizontal bars (E) to the upper side bars (F) using screws (M) and the hex key (P). (Refer to Video 2.1, 1:41)
• Attach the assembled upper side bars (F) to the main base frame using screws (N) and the hex key (P). (Refer to Video 2.1, 2:11)
• Secure the top hanging rail (G) to the top of the upper side bars (F) using screws (L) and the hex key (P). (Refer to Video 2.1, 2:23)

Step 4: Install Hook Boards and Anti-tipping Kit

• Attach the hook boards (H) to the upper frame using screws (L) and the hex key (P). (Refer to Video 2.1, 2:35)
• Insert the removable hooks (I) into the designated slots on the hook boards.
• Install the anti-tipping kit (O) to secure the unit to the wall, preventing accidental tipping. Drill pilot holes, insert wall anchors, and secure the straps to the unit and the wall. (Refer to Video 2.1, 2:49)

4. Operating Instructions

Your VASAGLE HSR40B Coat Rack Hall Tree is designed for versatile storage in your entryway or other living spaces.

4.1 Coat Rack Functionality

The top rail is designed for hanging coats, jackets, and shirts on hangers. The 9 removable hooks can be adjusted along the wooden panels to suit your needs, each supporting up to 3 kg for bags, scarves, and hats.

Image 4.1.1: Detail of the adjustable hooks, showing how they can be moved along the wooden panel.

4.2 Entryway Bench

The sturdy bench provides a comfortable seating area for changing shoes. It has a maximum load capacity of 80 kg. The side handles offer additional support when sitting down or standing up.

Image 4.2.1: A person comfortably using the bench to put on shoes.

4.3 Shoe Rack

The two lower mesh shelves offer convenient storage for multiple pairs of shoes, helping to keep your entryway tidy and organized.

Image 4.3.1: Detail of the two-tier shoe rack, showing its capacity for footwear.

4.4 Adjustable Feet

The adjustable feet at the base of the unit allow you to stabilize the hall tree on uneven floors, preventing wobbling and ensuring safety. They also protect your flooring from scratches.

Image 4.4.1: Detail of an adjustable foot, illustrating its leveling capability.

5. Maintenance

To ensure the longevity and appearance of your VASAGLE HSR40B Coat Rack Hall Tree, follow these maintenance guidelines:

• Cleaning: Wipe the surfaces with a soft, damp cloth. For stubborn dirt, a mild detergent can be used, followed by wiping with a dry cloth. Avoid abrasive cleaners.
• Fasteners: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain stability.
• Environment: Avoid exposing the product to direct sunlight for extended periods or to excessive moisture, as this can cause damage to the materials.

6. Troubleshooting

If you encounter any issues with your product, refer to the following common troubleshooting tips:

• Instability/Wobbling: Ensure all assembly screws are fully tightened. Check if the unit is on an even surface; adjust the leveling feet (J) as needed to compensate for unevenness.
• Missing Parts: If you find any parts missing upon unboxing, please refer to the 'Product Components' section and contact VASAGLE customer support with your model number and the specific part(s) required.
• Difficulty with Assembly: Review the assembly video (Video 2.1) and ensure all steps are followed correctly. Verify that you are using the correct screws for each connection point.

7. Specifications

8. Warranty and Support

For detailed warranty information, product registration, or to contact customer support for any inquiries or assistance, please refer to the documentation included with your product packaging or visit the official VASAGLE website. Please have your model number (HSR40B) and purchase information ready when contacting support.