Rug Doctor 93196

Rug Doctor FlexClean All-in-One Floor Cleaner User Manual

Model: 93196

Brand: Rug Doctor

Introduction

The Rug Doctor FlexClean All-in-One Floor Cleaner is designed to effortlessly extract grime, grease, grit, and gunk from both carpet and sealed hardwood floors. This versatile machine eliminates the need for multiple cleaning devices, offering a single solution for various floor surfaces in your home or office. Its ergonomic design ensures ease of use, handling like a regular vacuum cleaner with natural backward and forward movement.

Equipped with revolving brush penetration, powerful suction, and a squeegee nozzle, the FlexClean is tough on dirt while remaining gentle enough for use on all surfaces, including hardwood, stone, plush carpets, and area rugs.

Rug Doctor FlexClean All-in-One Floor Cleaner, front view.

Figure 1: The Rug Doctor FlexClean All-in-One Floor Cleaner. This image shows the complete unit with its clean water tank, dirty water tank, and cleaning head, alongside a bottle of cleaning solution.

Setup

Before first use, ensure all packaging materials are removed. Assembly of the Rug Doctor FlexClean is straightforward and typically takes less than a minute.

  1. Unpack the Unit: Carefully remove the FlexClean machine and all components from its packaging.
  2. Attach the Handle: Securely attach the main handle to the body of the machine. Ensure it clicks into place or is fastened according to the visual guides on the unit.
  3. Remove Protective Plastic: Peel off any protective plastic films from the machine's surfaces and tanks.
  4. Fill the Clean Water Tank: Locate the clean water tank (typically the upper, clear tank). Fill it with the appropriate Rug Doctor cleaning solution and warm water as per the solution's instructions. Do not overfill.
Hand removing the clear dirty water tank from the Rug Doctor FlexClean.

Figure 2: Detaching the clean water tank for filling. The clear tank is easily removable for adding water and cleaning solution.

Operating Instructions

The FlexClean is designed for ease of use across various floor types. Always vacuum or sweep the area thoroughly before using the FlexClean to remove loose debris.

General Operation

  • Power On: Plug the machine into a grounded electrical outlet. Press the power button to turn on the unit.
  • Select Floor Type: The FlexClean features adjustable spray rates. Select the appropriate setting for carpet or hard floors. This optimizes the amount of solution dispensed for effective cleaning and quicker drying.
  • Cleaning Passes: For best results, make slow, overlapping passes. Push the machine forward to dispense cleaning solution and scrub the surface. Pull the machine backward to activate the powerful suction and extract the dirty solution. Repeat as necessary until the area is clean.
  • Strong Suction: Be aware that the machine has extremely strong suction. While beneficial for cleaning, this may require physical strength to maneuver, especially on carpeted surfaces.

Cleaning Specific Surfaces

Carpet Cleaning

The carpet cleaning head is pre-attached. The FlexClean excels at deep cleaning carpets, removing both old and new stains, pet accidents, and odors. Its performance is comparable to, or even surpasses, that of rental machines.

Rug Doctor FlexClean in use on a light-colored carpet, showing the cleaning head.

Figure 3: FlexClean actively cleaning a carpeted surface.

Hardwood Floor Cleaning

The FlexClean effectively cleans sealed hardwood floors, providing a superior clean compared to many dedicated hard floor cleaners. Ensure the hard floor attachment is securely in place for optimal suction.

Rug Doctor FlexClean in use on a dark hardwood floor, showing the cleaning head.

Figure 4: FlexClean cleaning a hardwood floor, demonstrating its squeegee nozzle.

Tile and Grout Cleaning

This machine is highly effective on tile surfaces and can even help clean grout lines, providing a thorough clean for hard-to-reach areas.

Rug Doctor FlexClean cleaning carpet, hardwood, and tile surfaces.

Figure 5: The FlexClean demonstrating its versatility across different floor types including carpet, hardwood, and tile.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your Rug Doctor FlexClean.

  • Empty and Rinse Dirty Water Tank: After each use, immediately empty the dirty water tank. Rinse it thoroughly with clean water to prevent odors and residue buildup.
  • Clean the Machine: The machine can accumulate dirt in various parts during operation. It is crucial to clean all accessible components, including the cleaning head, brushes, and suction nozzle, to prevent blockages and maintain spray and vacuuming power.
  • Store Properly: Store the FlexClean in a dry, safe place. Ensure the tanks are empty and clean before storage.
Hand removing the clear dirty water tank from the Rug Doctor FlexClean.

Figure 6: The dirty water tank being removed for emptying and cleaning. Regular cleaning of this component is essential.

Troubleshooting

If you encounter issues with your Rug Doctor FlexClean, refer to the following common problems and solutions:

Problem Possible Cause Solution
Machine not spraying solution or losing spray power. Clogged spray nozzle or dirty water tank/lines. Ensure clean water tank is properly filled. Clean all parts of the machine, especially the spray nozzle and internal lines, to remove any blockages.
Machine not picking up water (poor suction). Hard floor attachment not securely in place; uneven floor surface; clogged suction path. Verify the hard floor attachment is correctly installed and sealed. Ensure the dirty water tank is properly seated. Clean the suction nozzle and dirty water tank for any obstructions. Note that some uneven floor spots may naturally retain more moisture.
Machine stops working entirely. Power issue; internal malfunction. Check power connection and outlet. If the issue persists after checking power, contact customer support.
Difficulty maneuvering the machine. High suction on carpet; machine weight. This is a characteristic of the powerful suction. Use slow, deliberate movements. Consider wearing gloves if prolonged use causes discomfort.

Specifications

Feature Detail
Brand Rug Doctor
Model Name FlexClean Machine; Lightweight, Easy-Maneuver
Model Number 93196
Color Red and Black
Item Weight 21 pounds
Product Dimensions (L x W x H) 18.5 x 12 x 29 inches
Capacity 1.5 Gallons
Power Source Electric
Included Components Flex Clean Carpet Cleaner, Cord, Filter, Water tanks
Diagram showing the height of the Rug Doctor FlexClean compared to an average person.

Figure 7: Visual representation of the FlexClean's height, approximately 3.7 feet.

Warranty Information

The Rug Doctor FlexClean All-in-One Floor Cleaner comes with a Five year limited consumer warranty. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official warranty documentation provided with your product or contact Rug Doctor customer support.

Support and Resources

For further assistance, additional resources, or to purchase accessories, please use the following:

  • Official User Manual (PDF): For a comprehensive guide, you can download the official PDF user manual: Download PDF Manual
  • Rug Doctor Store: Explore other products and accessories from Rug Doctor: Visit Rug Doctor Store

© 2024 Rug Doctor. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.