EKYLIN AC360-FT Front View Camera Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your EKYLIN AC360-FT Front View Camera. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. This camera is designed to enhance vehicle safety by providing a clear, non-mirror image of the area in front of your vehicle, without grid lines.

Key Features:

• Professional car front view camera.
• Screw Front Bumper Mount for secure installation.
• Waterproof design with 7070 HD Sensor for clear imaging.
• Non-mirror image output without grid lines, ideal for front view applications.
• Universal compatibility with most car models.

2. Package Contents

Please verify that all items listed below are included in your package:

• Front View Camera x 1
• 6M/20FT Video Cable with trigger lead (RCA) x 1
• 1.2M Power Cable x 1
• Screws x 2 (Note: Some packages may vary. If screws are missing, please contact customer support.)
• Retail Package x 1

Image: Components of the EKYLIN AC360-FT Front View Camera package, including the camera unit, video cable, and power cable.

3. Specifications

4. Setup and Installation

This section outlines the steps for installing your EKYLIN AC360-FT Front View Camera. Professional installation is recommended, but DIY installation is possible with basic tools and automotive knowledge.

4.1 Before You Begin

• Ensure your vehicle's ignition is off and the battery is disconnected to prevent electrical shorts.
• Gather necessary tools: drill, drill bits (appropriate size for camera mount and wiring), screwdriver, wire strippers, electrical tape, zip ties, multimeter (optional).
• Identify a suitable mounting location on the front bumper or grille that provides a clear, unobstructed view.

4.2 Mounting the Camera

1. Select Location: Choose a central and low-profile position on your front bumper or grille for optimal viewing.
2. Drill Hole: Using an appropriate drill bit (typically 3/4 inch, but verify with the camera's mounting sleeve), carefully drill a hole at the chosen location. Ensure there are no obstructions behind the drilling area.
3. Insert Camera: Insert the camera into the drilled hole. The camera is designed for flush mounting. Secure it from the back using the provided nut and washer.
4. Adjust Angle: The camera features a 360-degree adjustable angle. Once mounted, you can fine-tune the vertical and horizontal viewing angle by gently rotating the camera body within its housing.

Image: The EKYLIN AC360-FT Front View Camera, showing its compact design and screw-in mounting mechanism.

Image: Illustration of the flush mount design for the EKYLIN AC360-FT Front View Camera, showing how it sits within the bumper or grille.

Image: A hand demonstrating the 360-degree angle adjustment capability of the EKYLIN AC360-FT Front View Camera.

4.3 Wiring Connections

The camera requires power and a video signal connection to your vehicle's display unit (monitor).

1. Power Connection:
   • Connect the red wire of the 1.2M Power Cable to a 12V DC ignition-switched power source (e.g., ACC power).
   • Connect the black wire of the 1.2M Power Cable to a vehicle ground point.
   • Connect the small power cable from the camera to the 1.2M Power Cable.
2. Video Connection:
   • Connect the RCA male connector from the camera's video cable to the RCA input on your display unit (monitor).
   • The 6M/20FT Video Cable is designed to reach from the front of the vehicle to the dashboard.
   • The video cable includes a trigger lead (red wire) which can be connected to a 12V trigger source if your monitor requires a signal to switch to the front camera input. For a front camera, this is typically connected to an auxiliary switch or a constant 12V source that activates when you want to view the front camera.
3. Cable Routing: Carefully route all cables through the vehicle, avoiding moving parts, sharp edges, and heat sources. Use zip ties to secure cables.

Image: The 1.2-meter power cable for the EKYLIN AC360-FT Front View Camera, showing the bare wire ends for connection to vehicle power and ground.

Image: The 6-meter RCA video cable with a trigger lead, used to transmit the video signal from the camera to the display unit.

5. Operating Instructions

Once properly installed and wired, operating the EKYLIN AC360-FT Front View Camera is straightforward.

1. Power On: Turn on your vehicle's ignition. If the camera is wired to an ignition-switched power source, it will receive power.
2. Activate Display: Activate your vehicle's display unit (monitor) and select the appropriate video input channel where the camera is connected. This may involve pressing a button on your head unit or selecting an input source.
3. View Front Area: The camera will display a non-mirror image of the area directly in front of your vehicle. This is useful for parking, navigating tight spaces, or observing obstacles.
4. Night Vision: The camera features internal night vision assistance, providing improved visibility in low-light conditions.

Important Notes:

• The camera provides a non-mirror image and does not display grid lines, making it suitable for front-view applications where a true representation of the forward view is desired.
• Always use your mirrors and perform head checks in conjunction with the camera view for complete situational awareness.

6. Maintenance

To ensure optimal performance and longevity of your EKYLIN AC360-FT Front View Camera, follow these simple maintenance guidelines:

• Cleaning the Lens: Regularly clean the camera lens with a soft, damp cloth to remove dirt, dust, and water spots. Avoid abrasive cleaners or materials that could scratch the lens.
• Inspect Wiring: Periodically check all wiring connections for signs of wear, corrosion, or damage. Ensure all connections are secure.
• Check Mounting: Verify that the camera remains securely mounted and has not loosened over time due to vehicle vibrations.
• Avoid High-Pressure Washing: While the camera is waterproof (IP68 rated), avoid directing high-pressure water jets directly at the camera lens or housing during car washes, as this could potentially compromise the seal over time.

7. Troubleshooting

If you encounter issues with your EKYLIN AC360-FT Front View Camera, refer to the following troubleshooting steps:

If the problem persists after attempting these solutions, please contact EKYLIN customer support for further assistance.

8. Warranty and Support

EKYLIN products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official EKYLIN website.

Customer Support:

If you have any questions, require technical assistance, or need to report a defective product, please contact EKYLIN customer support through the retailer where you purchased the product or via the contact information provided on the official EKYLIN website.

Please have your product model number (AC360-FT) and purchase date available when contacting support.