GODOX TT520II

Download PDF
Contents

Godox TT520II Wireless 433MHz GN33 Camera Flash Speedlite Instruction Manual

Model: TT520II | Brand: GODOX

1. Introduction

The Godox TT520II is a versatile camera flash speedlite designed for various DSLR cameras, offering both on-camera and off-camera flash capabilities through its built-in 433MHz wireless transmission system. This manual provides detailed instructions for setting up, operating, and maintaining your TT520II flash to achieve optimal lighting in your photography.

2. Key Features

  • Wireless Transmission: Features 433MHz wireless transmission with a built-in receiver and 16 channels for reliable triggering.
  • Fast Flash Duration: Offers a flash duration of 1/300s to 1/20000s for clear and vivid images.
  • Multiple Flash Modes: Includes M (Manual), S1, and S2 modes for enhanced versatility.
  • Adjustable Power Output: Provides 8 variable flash output levels from 1/128 to full power.
  • Safety Features: Equipped with multiple auto-self protections for power saving and against overheating.
  • External Power Port: Includes a sync socket and a quick charge port for an external power pack.
  • Integrated Light Modifiers: Features an integrated reflection board for eye highlights and a built-in wide panel diffuser for soft, natural illumination.
  • Wide Compatibility: Compatible with Canon, Nikon, Sony, Olympus, Pentax, and Fuji DSLR cameras.

3. Package Contents

  • 1x Godox TT520II Camera Flash
  • 1x RT Remote Transmitter
  • 1x Protection Bag
  • 1x Mini Stand
  • 1x Instruction Manual
  • 1x Diffuser
  • 1x Color Filter Set

4. Product Overview

Godox TT520II Flash Speedlite with included accessories
The Godox TT520II Flash Speedlite shown with its wireless transmitter, diffuser, and color filter set.
Rear view of Godox TT520II Flash Speedlite controls
Rear panel of the TT520II, displaying the control buttons for mode, test, power adjustment, and the on/off switch.
Godox TT520II Flash Speedlite and RT Transmitter
The TT520II flash unit alongside its dedicated RT Remote Transmitter, used for wireless triggering.
Battery compartment of Godox TT520II Flash Speedlite
Open battery compartment of the TT520II, showing slots for AA batteries.
Integrated reflection board and wide panel diffuser of the flash
Close-up of the integrated reflection board and wide panel diffuser, designed to soften light and create eye highlights.
Sync socket and external power port on the flash unit
Detail of the sync socket and external power pack port on the side of the flash unit.
Hot shoe mount of the Godox TT520II flash
The universal hot shoe mount at the base of the flash for attaching to a camera or stand.

5. Setup

5.1 Battery Installation

  1. Open the battery compartment cover on the side of the flash unit.
  2. Insert four (4) AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  3. Close the battery compartment cover securely.

5.2 Mounting the Flash

On-Camera Mounting:

  1. Slide the hot shoe of the TT520II flash into your camera's hot shoe mount.
  2. Rotate the locking ring on the flash's hot shoe clockwise until it is securely fastened to the camera.

Off-Camera Mounting (using Mini Stand):

  1. Attach the mini stand to the hot shoe of the TT520II flash.
  2. Place the flash with the mini stand on a flat surface or mount it onto a light stand using the threaded socket on the mini stand.

5.3 RT Transmitter Setup

  1. Insert the RT Remote Transmitter into your camera's hot shoe mount.
  2. Ensure the channel switches on both the flash unit and the transmitter are set to the same channel (1-16) for proper wireless communication.

6. Operating Instructions

6.1 Power On/Off

  • To power on, slide the ON/OFF switch to the 'ON' position. The indicator lights will illuminate.
  • To power off, slide the ON/OFF switch to the 'OFF' position.

6.2 Mode Selection

Press the 'MODE' button to cycle through the available flash modes:

  • M (Manual Mode): Allows you to manually set the flash power output.
  • S1 (Slave Mode 1): The flash will fire in sync with the first flash detected from a master flash.
  • S2 (Slave Mode 2): The flash will ignore the pre-flash of a master flash and fire on the main flash.

6.3 Power Output Adjustment (Manual Mode)

  • In M mode, use the '+' and '-' buttons to adjust the flash power output from 1/128 to 1/1 (full power).
  • The power level is indicated by the illuminated bars on the rear panel.

6.4 Test Flash

  • Press the 'TEST' button to fire a test flash and check the current power output.

6.5 Using Integrated Light Modifiers

  • Reflection Board: Pull out the small white card from the flash head to create a catchlight in your subject's eyes.
  • Wide Panel Diffuser: Pull out the wider white panel from the flash head to soften the light and broaden its spread.

6.6 Angle Adjustment

  • The flash head can be rotated horizontally from 0 to 270 degrees and tilted vertically from 0 to 90 degrees to direct light as needed for bouncing or direct illumination.

6.7 Wireless Triggering

  • With the RT Transmitter mounted on your camera and the flash unit set to a matching channel (M, S1, or S2 mode), the flash will fire wirelessly when you press your camera's shutter button.

7. Maintenance

  • Keep the flash unit dry. Do not handle with wet hands.
  • Clean the flash head and body with a soft, dry cloth. Avoid using solvents or harsh chemicals.
  • Remove batteries when the flash is not in use for extended periods to prevent leakage.
  • Store the flash in a cool, dry place, preferably in its protective bag.

8. Troubleshooting

  • Flash not firing: Check battery levels, ensure the flash is powered on, and verify that the transmitter and flash are on the same channel if using wireless mode.
  • Weak flash output: Increase the power output setting in Manual mode or ensure fresh batteries are installed.
  • Overheating: Allow the flash to cool down if it becomes hot after rapid consecutive flashes. The auto-self protection will temporarily disable firing.
  • Wireless triggering issues: Confirm the transmitter is correctly mounted and powered, and that both devices are set to the same channel. Ensure no obstructions are blocking the signal.

9. Specifications

FeatureSpecification
Product Dimensions2.15 x 2.95 x 7.5 inches
Item Weight1.21 pounds
Item Model NumberTT520II(GN33)
BrandGODOX
Compatible MountingsCanon Nikon Sony Olympus Pentax Fuji
Camera Flash TypeBuilt-In
Flash Sync Speed1/10000
Wireless Transmission433MHz
Guide NumberGN33 (ISO 100)

10. Official Product Videos

Video 1: Godox Wireless 433MHz GN33 Camera Flash Speedlite with Built-in Receiver with RT Transmitter
This video provides a comprehensive overview of the Godox TT520II flash, demonstrating its key features and components, including the wireless transmitter and various accessories. It highlights the ease of use and the wireless capabilities of the unit.
Video 2: Godox Wireless 433MHz GN33 Camera Flash Speedlite
This video showcases the Godox TT520II in action, demonstrating its use in a photography setting. It illustrates how the flash can be used both on-camera and off-camera to achieve desired lighting effects.
Video 3: Godox TT520II Camera Flash
This video provides a quick demonstration of the Godox TT520II flash, including unboxing, basic controls, and a test fire. It highlights the simplicity of its operation.

11. Warranty and Support

For warranty information and customer support, please refer to the documentation included in your product packaging or visit the official Godox website. Keep your purchase receipt as proof of purchase for any warranty claims.

© 2025 GODOX. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.