1. Introduction
Thank you for choosing the Keter Ontario 870L Storage Box. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new storage solution. Please read this manual thoroughly before beginning assembly and retain it for future reference.
Figure 1: Keter Ontario 870L Storage Box in closed position.
2. Safety Information
To ensure safe use of this product, please observe the following warnings:
- Read all instructions carefully before assembly and use.
- Do not stand on the product.
- Do not allow children to play inside the box to prevent suffocation.
- Ensure the box is placed on a flat, stable surface.
- Do not store hazardous materials or flammable liquids inside the box.
- Keep hands clear of hinges and closing lid to prevent pinching.
3. Parts List
Before beginning assembly, please verify that all components are present and undamaged. If any parts are missing or damaged, please contact Keter customer support.
| Part | Description | Quantity |
|---|---|---|
| A | Side Panels | 2 |
| B | Front Panel | 1 |
| C | Back Panel | 1 |
| D | Base Panel | 1 |
| E | Lid | 1 |
| F | Gas Struts | 2 |
| G | Locking Mechanism | 1 |
| H | Fasteners/Screws | Assorted |
4. Setup and Assembly
Assembly typically requires two people and takes approximately 40 minutes. No special tools are required beyond a screwdriver.
- Prepare the Base: Place the Base Panel (D) on a flat, level surface where the storage box will be located.
- Attach Side Panels: Connect the Side Panels (A) to the Base Panel (D) by aligning the grooves and pressing firmly until they click into place. Ensure the handle cutouts on the side panels are facing outwards.
- Install Front and Back Panels: Attach the Front Panel (B) and Back Panel (C) to the assembled side and base panels. Ensure all connections are secure.
- Secure the Structure: Use the provided fasteners (H) to reinforce the connections between all four wall panels and the base.
- Attach the Lid: Carefully align the Lid (E) with the top edges of the assembled box. Secure the lid using the hinge mechanisms and fasteners (H) as indicated in the diagram.
- Install Gas Struts: Attach the Gas Struts (F) to the designated points on the inside of the box and the underside of the lid. These struts assist in opening and holding the lid open. Ensure they are securely fastened.
Figure 2: Detail of the gas strut for smooth lid operation.
- Install Locking Mechanism: Attach the Locking Mechanism (G) to the front of the lid and the front panel. This allows for securing the box with a padlock (not included).
Figure 3: The integrated latch for securing the lid.
5. Operating Instructions
The Keter Ontario 870L Storage Box is designed for easy and secure storage of various outdoor items.
- Opening the Lid: Lift the front edge of the lid. The gas struts will assist in smoothly raising the lid and holding it open.
- Closing the Lid: Gently pull the lid downwards. The gas struts will provide resistance for a controlled closure. Ensure no objects or body parts are in the way of the closing lid.
- Storage Capacity: The box offers a generous 870-litre capacity, suitable for garden tools, cushions, pool equipment, and other outdoor accessories.
Figure 4: Interior view demonstrating the spacious storage capacity.
- Security: The integrated latch allows for the addition of a standard padlock (not supplied) for enhanced security of your stored items.
6. Maintenance
To ensure the longevity and appearance of your Keter storage box, follow these simple maintenance guidelines:
- Cleaning: Clean the box regularly with a soft cloth, mild soap, and water. Avoid abrasive cleaners or harsh chemicals, as these can damage the plastic.
- Stains: For stubborn stains, a non-abrasive plastic cleaner can be used. Always test on an inconspicuous area first.
- Winter Care: While the box is weather-resistant, it is advisable to clear any heavy snow accumulation from the lid to prevent excessive weight.
- Ventilation: Ensure adequate ventilation if storing items that may be susceptible to moisture build-up.
7. Troubleshooting
Here are solutions to common issues you might encounter:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lid does not close properly. | Obstruction, uneven surface, misaligned panels. | Check for items blocking the lid. Ensure the box is on a level surface. Verify all panels are securely clicked into place. |
| Lid is difficult to open/close. | Gas struts not installed correctly or damaged. | Ensure gas struts are securely attached at both ends. If damaged, contact customer support for replacement. |
| Water inside the box. | Lid not fully closed, extreme weather, damaged seal. | Ensure lid is fully closed and latched. Check for any visible damage to the box or lid seal. Consider placing in a more sheltered area during heavy rain. |
8. Specifications
Detailed technical specifications for the Keter Ontario 870L Storage Box:
| Feature | Detail |
|---|---|
| Model Number | 235131 |
| Capacity | 870 Litres |
| External Dimensions (L x W x H) | 147 cm x 86 cm x 83 cm (approx.) |
| Item Weight | 25 kg (approx.) |
| Material | Durable Resin Plastic |
| Color | Brown |
| Special Features | Weather-resistant, UV protected, Gas Struts for easy opening, Lockable (padlock not included) |
Figure 5: Product dimensions for the Keter Ontario 870L Storage Box.
9. Warranty and Support
Keter products are manufactured to the highest standards and undergo strict quality control. For information regarding warranty coverage or to obtain replacement parts, please contact Keter customer service directly. Please have your model number (235131) and proof of purchase ready when contacting support.
For further assistance, visit the official Keter website or refer to your purchase documentation for contact details.
