1. Setup
Follow these steps to set up your Capello Dual Alarm Clock.
- Power Connection: Plug the AC adapter into a standard wall outlet and connect it to the DC input jack on the back of the alarm clock. The display will illuminate.
- Battery Backup Installation: For backup power during outages, open the battery compartment on the bottom of the unit. Insert two 'AAA' batteries (not included), observing the correct polarity (+/-). This will preserve time and alarm settings.
- Initial Time Setting: Upon first power-up, the clock display may flash. Refer to the 'Setting Time' section under Operating Instructions to set the current time.
Image: Front view of the Capello Dual Alarm Clock. The digital display shows '12:43 AM' and two small bell icons, indicating dual alarm capability. A USB charging port is visible below the display.
2. Operating Instructions
This section details how to operate the various functions of your alarm clock.
2.1 Setting Time
- Press and hold the 'TIME SET' button (located on the top of the unit) until the hour digits begin to flash.
- Use the 'HOUR' and 'MINUTE' buttons to adjust the time. Pressing and holding these buttons will advance the time quickly.
- Press 'TIME SET' again to confirm the time.
2.2 Setting Alarms
The clock features two independent alarms (Alarm 1 and Alarm 2).
- Press and hold the 'ALARM 1' or 'ALARM 2' button until the alarm hour digits flash.
- Use the 'HOUR' and 'MINUTE' buttons to set the desired alarm time.
- Press 'ALARM 1' or 'ALARM 2' again to confirm the alarm time. The corresponding alarm icon will appear on the display.
- To turn an alarm off, press the respective 'ALARM 1' or 'ALARM 2' button once. The alarm icon will disappear.
2.3 Snooze Function
When an alarm sounds, press the 'SNOOZE' button (located on the top) to temporarily silence the alarm for approximately 9 minutes. The alarm will sound again after the snooze period.
2.4 Adjusting Display Brightness
Press the 'DIMMER' button (located on the top) repeatedly to cycle through different brightness levels for the blue backlit display.
2.5 Using the USB Charging Port
The front-facing USB port provides 2A power for charging compatible smartphones, tablets, and other USB-powered devices. Simply connect your device's USB charging cable to the port.
Image: Angled view of the Capello Dual Alarm Clock, showing the digital display with '12:46 AM' and the top panel with control buttons for time, alarm, snooze, and dimmer functions.
Image: The Capello Dual Alarm Clock with a white USB cable connected to its front charging port, demonstrating its charging capability.
3. Maintenance
Proper care ensures the longevity of your alarm clock.
- Cleaning: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace the 'AAA' backup batteries annually or when the clock loses time during power outages, even if the unit is plugged in. Ensure correct polarity when replacing.
- Storage: If storing the unit for an extended period, remove the backup batteries to prevent leakage.
4. Troubleshooting
If you encounter issues with your Capello Dual Alarm Clock, refer to the following common solutions:
- Clock Not Displaying / No Power:
- Ensure the AC adapter is securely plugged into both the clock and a working wall outlet.
- Check if the wall outlet is functional by plugging in another device.
- Alarm Not Sounding:
- Verify that the alarm is set and the corresponding alarm icon (bell 1 or bell 2) is visible on the display.
- Ensure the alarm time is set correctly (AM/PM).
- USB Port Not Charging Device:
- Confirm the alarm clock is powered on and connected to an AC outlet.
- Check the USB cable for damage and ensure it is properly connected to both the clock and your device.
- Ensure your device is compatible with USB charging and does not require a higher power output than 2A.
- Time/Settings Lost After Power Outage:
- Check if the 'AAA' backup batteries are installed and are fresh. Replace if necessary.
- Ensure the batteries are inserted with correct polarity.
5. Specifications
| Feature | Detail |
|---|---|
| Brand | Capello |
| Model Number | 8541846860 |
| Product Dimensions | 4.72 x 4.57 x 4.25 inches |
| Weight | 10.23 ounces |
| Color | White |
| Display Type | Digital, Blue Backlit |
| Special Features | Adjustable Brightness, Dual Alarm, Snooze, USB Charging Port (2A) |
| Power Source | Corded Electric |
| Backup Battery | 2 x 'AAA' batteries (not included) |
| Material | Plastic |
| Indoor/Outdoor Usage | Indoor |
6. Warranty Information
Specific warranty details for this product are not provided in the available information. Please refer to the product packaging or contact Capello customer support for warranty terms and conditions.
7. Support
For further assistance or inquiries regarding your Capello Dual Alarm Clock, please refer to the contact information provided on the product packaging or the official Capello website. No specific support contact details are available in this manual.
