Ariete 2875
Contents
Ariete 2875 Wireless Electric Kettle User Manual
Brand: Ariete | Model: 2875
1. Product Overview
The Ariete 2875 Wireless Electric Kettle is designed for quick and efficient water boiling. Its cordless design and 1.7-liter capacity make it ideal for daily use in any kitchen. Key features include a clear water level indicator, automatic shut-off, and a durable plastic construction.
- Capacity: 1.7 Liters (approximately 7 cups)
- Power: 1850 - 2200 Watts
- Voltage: 220 Volts
- Material: Durable Plastic
- Features: Cordless design, Automatic Shut-off, Clear Water Level Indicator

2. Safety Instructions
Please read all safety instructions carefully before using the appliance to prevent personal injury or damage to the kettle.
- Do not immerse the kettle, power base, cord, or plug in water or any other liquid.
- Ensure the voltage indicated on the appliance matches your local mains voltage before connecting.
- Always place the kettle on a firm, flat, heat-resistant surface, away from the edge of the worktop.
- Do not operate the kettle if the cord or plug is damaged, or if the kettle malfunctions or has been damaged in any way.
- Keep the appliance out of reach of children.
- Do not fill above the 'MAX' mark or below the 'MIN' mark to prevent boiling dry or overflow.
- Always close the lid securely before operating.
- Exercise caution when pouring hot water.
3. Setup
Follow these steps for initial setup of your Ariete electric kettle:
- Unpacking: Carefully remove the kettle and its power base from the packaging. Retain the packaging for future storage or transport.
- First Use Cleaning: Before first use, fill the kettle with clean water up to the 'MAX' level. Boil the water, then discard it. Repeat this process two to three times to remove any manufacturing residues.
- Placement: Place the power base on a stable, flat, and dry surface. Ensure the power cord is not dangling or in a position where it can be tripped over.

4. Operating Instructions
Operating your Ariete kettle is simple and straightforward:
- Fill the Kettle: Press the lid release button to open the lid. Fill the kettle with the desired amount of water, ensuring it is between the 'MIN' (0.5L) and 'MAX' (1.7L) marks on the water level indicator. Close the lid firmly until it clicks.
- Place on Base: Place the filled kettle onto its power base.
- Power On: Plug the power base into a suitable electrical outlet. Press the ON/OFF switch located on the handle downwards. The indicator light will illuminate, signifying that the kettle is heating.
- Automatic Shut-off: The kettle will automatically switch off once the water has boiled. The indicator light will turn off, and the switch will return to the UP position.
- Pouring: Carefully lift the kettle from its base and pour the hot water.
- Re-boiling: If you need to re-boil, wait a few moments for the automatic shut-off mechanism to reset before pressing the switch again.


5. Maintenance and Cleaning
Regular cleaning and maintenance will prolong the life of your kettle.
5.1. Daily Cleaning
- Always unplug the kettle and allow it to cool completely before cleaning.
- Wipe the exterior of the kettle with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
- Rinse the interior of the kettle with clean water.
- The filter at the spout can be removed for cleaning by rinsing it under running water. Ensure it is properly re-inserted before use.
5.2. Descaling
Over time, mineral deposits (limescale) may build up inside the kettle, especially in hard water areas. Descale your kettle regularly to maintain performance.
- Fill the kettle with a mixture of one part white vinegar and two parts water.
- Bring the mixture to a boil and then let it stand for at least 30 minutes, or longer for heavy scale.
- Empty the kettle and rinse thoroughly with fresh water several times.
- For stubborn deposits, gently scrub the interior with a non-abrasive brush or sponge.
- Alternatively, use a commercial descaling solution following the product's instructions.
6. Troubleshooting
If you encounter issues with your kettle, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Kettle does not heat up. | Not plugged in; Power switch not pressed; Kettle not properly seated on base; No power at outlet. | Ensure plug is fully inserted; Press the ON/OFF switch down; Re-seat kettle firmly on base; Check power outlet with another appliance. |
| Kettle switches off before boiling. | Too much limescale build-up; Kettle is boiling dry (insufficient water). | Descale the kettle (refer to Maintenance section); Ensure water level is above 'MIN' mark. |
| Water tastes strange or has particles. | New kettle residue; Limescale particles. | Perform initial cleaning (refer to Setup section); Descale the kettle. |
| Lid does not close properly. | Obstruction; Misalignment. | Check for any foreign objects preventing closure; Gently adjust the lid until it aligns and clicks into place. |
If the problem persists after trying these solutions, please contact customer support.
7. Specifications
| Brand | Ariete |
| Model Number | 2875 |
| Color | White |
| Product Dimensions | 22 x 17 x 20 cm |
| Item Weight | 750 grams |
| Capacity | 1.7 Liters (7 cups) |
| Power / Electrical Power | 2200 Watts |
| Electrical Voltage | 220 Volts |
| Material | Plastic |
| Automatic Shut-off | Yes |
| Noise Level | 44 dB |
| Special Features | Automatic shut-off, Water level indicator, Wireless |
| First Available Date | January 8, 2018 |

8. Warranty and Support
Information regarding specific warranty terms and customer support contact details is not available in the provided product data. Please refer to the product packaging or the manufacturer's official website for warranty information and support contacts.
For general inquiries or assistance, you may visit the Ariete official website or contact their customer service department.
9. Official Product Videos
No official product videos from the seller were found in the provided data for this product.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.