Domus Line Spot Smally Plus Recessed LED Light User Manual

1. Product Overview

The Domus Line Spot Smally Plus is a compact, high-quality LED light designed for recessed installation in indoor environments. It features a natural white light color (4300K) and a durable alloy steel finish in grey. This 3W, 12V LED spot is engineered for easy and efficient setup, requiring a minimal recess depth and bore hole, and utilizes a convenient Plug & Play system for electrical connection.

Its design ensures a spot-free illumination, providing uniform light distribution. Ideal for various interior lighting applications where discreet and effective lighting is desired.

2. Safety Information

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Disconnect Power: Always ensure the main power supply to the installation area is turned off at the circuit breaker before beginning any installation, maintenance, or cleaning procedures.
• Correct Voltage: This product operates on 12 Volts (DC). Ensure your power supply is compatible and provides the correct voltage. Connecting to an incorrect voltage may damage the product and void the warranty.
• Qualified Installation: If you are unsure about electrical wiring or installation procedures, consult a qualified electrician.
• Indoor Use Only: This product is designed for indoor use only. Do not expose it to moisture, water, or extreme outdoor conditions unless explicitly stated otherwise.
• Avoid Obstruction: Do not cover the light fixture with any materials that could impede heat dissipation, as this may lead to overheating.
• No User Serviceable Parts: The LED light source is not replaceable. Do not attempt to open or modify the fixture.

3. Package Contents

Verify that all components are present and undamaged upon unpacking:

• 1x Domus Line Spot Smally Plus Recessed LED Light
• 1x Integrated Connection Cable (with Plug & Play connector)

4. Setup and Installation

The Domus Line Spot Smally Plus is designed for straightforward recessed mounting. Follow these steps for proper installation:

1. Prepare the Installation Area: Ensure the power supply to the intended installation location is completely disconnected at the main circuit breaker.
2. Drill the Bore Hole: Using an appropriate drill bit, create a circular bore hole with a diameter of 57 mm (approximately 2.24 inches) at the desired mounting point. Ensure the recess depth is at least 12 mm (approximately 0.47 inches) to accommodate the fixture.
3. Insert the Light Fixture: Gently push the Domus Line Spot Smally Plus into the prepared bore hole. The integrated spring clips on the sides of the fixture will automatically engage and secure the light in place.
4. Connect Power: Locate the integrated connection cable from the light fixture. Connect this cable to your compatible 12V DC power supply using the Plug & Play connector. Ensure a secure and proper connection.
5. Test Operation: Once the light is securely installed and connected, restore power to the circuit. Test the light to ensure it functions correctly.

Figure 4.1: Dimensional drawing indicating required bore hole (Ø57) and recess depth (12).

Figure 4.2: Rear view of the light fixture, illustrating the Plug & Play connector for power supply.

5. Operating Instructions

The Domus Line Spot Smally Plus LED light operates by receiving a 12V DC power supply. There are no direct controls on the fixture itself.

• Power On/Off: The light will illuminate when power is supplied to the circuit it is connected to. Operation is typically controlled via an external wall switch, dimmer, or other control device connected to your 12V power system (these external controls are not included with the light fixture).
• Light Output: The fixture provides a natural white light at 4300K with a power output of 3 Watts.

Figure 5.1: The Domus Line Spot Smally Plus in operation, emitting natural white light.

6. Maintenance

The Domus Line Spot Smally Plus requires minimal maintenance.

• Cleaning: To clean the light fixture, ensure the power supply is disconnected. Gently wipe the surface with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or internal components.
• No User Servicing: This product contains no user-serviceable parts. Any attempt to disassemble or repair the unit will void the warranty and may result in damage or injury.

7. Troubleshooting

If you encounter issues with your Domus Line Spot Smally Plus, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support or a qualified electrician.

8. Specifications

9. Warranty and Support

Specific warranty details for the Domus Line Spot Smally Plus are not provided in the product information. For warranty claims or detailed support, please retain your proof of purchase and contact the retailer from whom you purchased the product.

Information regarding the availability of spare parts for this product is currently unavailable.

For general inquiries or technical assistance, you may also visit the official Domus Line website or contact their customer service directly.