Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Hyperkin SupaRetroN HD Gaming Console. This console is designed to play Super NES and Super Famicom game cartridges on modern high-definition displays. Please read this manual thoroughly before use to ensure proper functionality and longevity of your device.
Package Contents
Verify that all items listed below are included in your package:
- 1 x Hyperkin SupaRetroN HD Gaming Console
- 2 x "Scout" Premium Classic-Style Controllers (8 ft. cable each)
- 1 x 3 ft. HD Cable (HDMI)
- 1 x 6 ft. Micro USB Charge Cable with USB AC Adapter
- 1 x AV Cable (for composite video and stereo audio)
Image: Hyperkin SupaRetroN HD Gaming Console, including two controllers and the retail packaging.
Console Overview
Familiarize yourself with the various components and ports of the SupaRetroN HD console.
Front Panel
- Power Button: Turns the console on or off.
- Eject Button: Releases the game cartridge from the slot.
- Reset Button: Resets the console, returning to the game's title screen or initial state.
- Controller Ports: Two ports for connecting SNES-compatible controllers.
Rear Panel
- Micro-USB Port: For power input.
- HD Output Port: For connecting to an HD display via HDMI cable.
- Video Output (Yellow RCA): For composite video output.
- Audio Output (Red/White RCA): For stereo audio output.
- 16:9/4:3 Aspect Ratio Switch: Toggles between widescreen and original aspect ratios.
Bottom Panel
- NTSC/PAL Region Switch: Selects the appropriate region setting for game cartridges.
Image: The SupaRetroN HD console shown with two connected controllers.
Image: Detail of the console's cartridge slot, featuring Hyperkin's Pin Perfect technology for enhanced compatibility.
Setup Instructions
Follow these steps to set up your Hyperkin SupaRetroN HD Gaming Console:
- Connect Power: Connect the Micro USB cable to the Micro-USB port on the rear of the console. Plug the other end into the included USB AC adapter, then plug the adapter into a wall outlet.
- Connect to Display:
- For HD Displays (Recommended): Connect one end of the included HD cable (HDMI) to the HD Output port on the console and the other end to an available HDMI input on your television or monitor.
- For Standard Definition Displays: Connect the included AV cable to the Video (yellow), Audio Left (white), and Audio Right (red) RCA ports on the console. Connect the other end to the corresponding input ports on your television.
- Connect Controllers: Plug the two "Scout" controllers into the controller ports on the front of the console. The console also supports original SNES controllers.
- Insert Game Cartridge: Gently insert a Super NES or Super Famicom game cartridge into the cartridge slot on top of the console until it clicks into place. Ensure the cartridge is facing the correct direction.
Image: The rear of the console, showing the HD Output port for connecting to modern displays.
Image: The rear of the console, indicating the Micro-USB port for power connection.
Image: A close-up of the included "Scout" premium classic-style controller with its 10 ft. cable.
Operating Instructions
Once the console is set up, follow these steps to begin playing:
- Power On: Press the Power button on the front of the console. The power indicator light will illuminate.
- Select Input: Switch your television or monitor to the correct HDMI or AV input channel where the console is connected.
- Start Game: The game should load automatically. If not, press the Reset button.
- Eject Cartridge: To remove a game cartridge, gently pull it upwards from the slot. While an eject button is present, manual removal is often smoother.
NTSC/PAL Region Switch
The Hyperkin SupaRetroN HD console features a region switch on its bottom panel to ensure compatibility with both NTSC (North America, Japan) and PAL (Europe, Australia) Super NES/Super Famicom cartridges.
- NTSC: Select this setting for cartridges from NTSC regions.
- PAL: Select this setting for cartridges from PAL regions.
If a game does not load or displays an error message, ensure this switch is set to the correct region for your cartridge. You may need to power cycle the console after changing the switch setting.
Image: The bottom of the console, showing the NTSC/PAL switch for region compatibility.
Aspect Ratio Switch
The console includes a switch on the rear panel to toggle between 16:9 (widescreen) and 4:3 (original) aspect ratios for video output.
- 16:9: Stretches the image to fill a widescreen display.
- 4:3: Preserves the original aspect ratio of the game, often resulting in black bars on the sides of a widescreen display.
Adjust this switch according to your preference and display type. Changes take effect immediately.
Image: The rear of the console, showing the 16:9/4:3 aspect ratio switch.
Maintenance
To ensure the longevity and optimal performance of your console:
- Keep the console in a clean, dry environment, away from direct sunlight and extreme temperatures.
- Avoid spilling liquids on the console or controllers.
- Clean the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Periodically inspect controller cables for damage.
- Ensure game cartridges are clean before inserting them into the console.
Troubleshooting
If you encounter issues with your SupaRetroN HD console, refer to the following common solutions:
- No Power: Ensure the Micro USB cable is securely connected to both the console and the AC adapter, and that the adapter is plugged into a working power outlet. Try a different outlet or USB power source.
- No Video/Audio:
- Verify that the HDMI or AV cables are securely connected to both the console and the display.
- Ensure your television is set to the correct input source (HDMI 1, AV, etc.).
- If using HDMI, try a different HDMI port on your TV or a different HDMI cable.
- Game Not Loading/Displaying Errors:
- Ensure the game cartridge is fully and correctly inserted.
- Clean the cartridge contacts with a cotton swab and rubbing alcohol.
- Check the NTSC/PAL region switch on the bottom of the console and ensure it matches the region of your game cartridge. Power cycle the console after adjusting this switch.
- Press the Reset button on the console.
- Controller Issues (e.g., unresponsive, diagonal input problems):
- Ensure controllers are firmly plugged into the console's front ports.
- Test with a different game or controller if available to isolate the issue.
- Some games, particularly those requiring precise diagonal inputs (e.g., fighting games), may exhibit limitations with certain third-party controllers.
Specifications
| Model Number | M06888 |
| Brand | Hyperkin |
| Compatibility | Super NES (NTSC) and Super Famicom (PAL) Cartridges |
| Video Output | 720p HD (HDMI), Composite Video (RCA) |
| Audio Output | Stereo (HDMI, RCA) |
| Aspect Ratio | Switchable 16:9 / 4:3 |
| Power Input | Micro USB |
| Dimensions | 11 x 4 x 8 inches |
| Weight | 2.6 Pounds |
| Included Controllers | 2 x "Scout" Premium Classic-Style Controllers (8 ft. cable) |
Warranty and Support
For warranty information or technical support, please refer to the official Hyperkin website or contact Hyperkin customer service directly. Keep your proof of purchase for warranty claims.
Hyperkin Official Website: www.hyperkin.com
