Beats A1680

Beats Pill Plus Portable Wireless Speaker (Model A1680) - Instruction Manual

Introduction

This instruction manual provides essential information for the safe and efficient use of your Beats Pill Plus Portable Wireless Speaker, Model A1680. Please read this manual thoroughly before operating the device and retain it for future reference.

Beats Pill Plus Portable Wireless Speaker, front view

Figure 1: Front view of the Beats Pill Plus Portable Wireless Speaker.

Key Features

Package Contents

Ensure all items are present in the package:

Setup

1. Initial Charging

  1. Locate the charging port on the back of the speaker, usually covered by a rubber flap.
  2. Connect the Lightning end of the charging cable to the speaker's charging port.
  3. Connect the USB-A end of the charging cable to the provided power adapter.
  4. Plug the power adapter into a standard 110V wall outlet.
  5. Allow the speaker to charge completely before first use (approximately 3 hours). The LED indicator lights on the top of the speaker will show charging progress and full charge status.
Beats Pill Plus Portable Wireless Speaker, rear view showing ports

Figure 2: Rear view of the Beats Pill Plus showing the covered ports for charging and auxiliary input.

Operating Instructions

1. Power On/Off

2. Bluetooth Pairing

  1. Ensure the speaker is powered on.
  2. The 'b' logo button in the center of the speaker will blink, indicating it's in pairing mode.
  3. On your mobile device (phone, iPad, iPhone), go to the Bluetooth settings.
  4. Select "Beats Pill+" from the list of available devices.
  5. Once connected, the 'b' logo will glow solid white, and a confirmation tone will sound.

3. Volume Control

4. Audio Playback

5. Call Management

6. Auxiliary Input

Maintenance

Troubleshooting

ProblemSolution
Speaker does not power on.Ensure the battery is charged. Connect the speaker to a power source and allow it to charge for at least 30 minutes before attempting to power on again.
Cannot pair via Bluetooth.
  • Make sure the speaker is in pairing mode (blinking 'b' logo).
  • Ensure your device's Bluetooth is enabled and within range.
  • Forget "Beats Pill+" from your device's Bluetooth list and try pairing again.
  • Restart both the speaker and your device.
No sound or low volume.
  • Check the volume levels on both the speaker and your connected device.
  • Ensure the speaker is properly paired via Bluetooth or the 3.5mm cable is securely connected.
  • Try playing a different audio source.
Speaker not charging.
  • Verify the charging cable and power adapter are correctly connected and functioning.
  • Try a different power outlet.
  • Inspect the charging port for any debris or damage.

Specifications

FeatureDetail
BrandBeats
Model NameBeats Pill+ (A1680)
Wireless TechnologyBluetooth
Audio Output ModeStereo
Speaker Maximum Output Power5 Watts
Battery LifeUp to 12 hours
Charging TimeApproximately 3 hours
Power Source110V (via adapter)
Control MethodTouch buttons
MaterialPlastic
Item Weight1.28 Pounds
Water Resistance LevelNot Water Resistant

Warranty and Support

This renewed product comes with a minimum 90-day supplier-backed warranty. For support, please refer to the contact information provided by your supplier or the Amazon Renewed program.

For additional product information or general inquiries, please visit the official Beats website or contact their customer service.

Related Documents - A1680

Preview Beats Pill+ User Guide
This guide provides instructions on how to use and set up your Beats Pill+ portable speaker, including charging, powering on, pairing via Bluetooth, and playing audio. It also details app download information and support resources.
Preview Beats Pill: Seriously Loud Portable Speaker with 24-Hour Battery
Discover the redesigned Beats Pill portable speaker. Experience seriously loud sound, powerful bass, 24-hour battery life, IP67 water resistance, and seamless Apple/Android compatibility. Learn about its features, specifications, and design.
Preview Beats Studio³ Wireless Headphones User Guide
Comprehensive user guide for Beats Studio³ Wireless headphones, covering setup, pairing, charging, usage, troubleshooting, and firmware updates.
Preview Beats Headphones & Earphones Troubleshooting Guide | Sound & Bluetooth Issues
Troubleshoot common audio, Bluetooth, and connection problems with Beats headphones and earphones. This guide covers sound issues, connectivity, and detailed reset procedures for various models.
Preview Beats Pro Headphones: Safety, Usage, and Remote Mic Guide
A comprehensive guide for Beats Pro headphones, detailing important safety information, responsible listening practices, and instructions for using the integrated remote microphone and controls with various devices.
Preview Set Up and Use Beats Studio Buds: Pairing, Features, and Controls
Comprehensive guide to setting up and using Beats Studio Buds. Learn how to pair with iPhone, iPad, Android, and Mac. Master music playback, volume control, call handling, Siri, and noise cancellation modes.