1. Introduction
The Progress Lighting AirPro 3-Light Ceiling Fan Light Kit is designed to provide illumination and enhance the functionality of compatible ceiling fans. This kit features three lights with white washed alabaster style glass shades and a brushed nickel finish. It includes a chrome pull-chain with a maple fob for operation and an innovative spring clip glass attachment system for easy installation without visible hardware. This light kit is suitable for use with Progress Lighting P2500 and P2501 ceiling fans and comes with quick connectors for simplified wiring. Three 3000K, 800 lumen, Title 24 certified LED bulbs are included.
2. General Safety Information
WARNING: To reduce the risk of electric shock, fire, or injury, always turn off the power at the main circuit breaker or fuse box before beginning installation or performing any maintenance. Ensure all electrical connections comply with local codes and ordinances. If you are unsure about wiring, consult a qualified electrician. Do not install this light kit on a ceiling fan that is not specifically designed to accept a light kit. Always use bulbs of the specified wattage and type.
3. Package Contents
Verify that all components are present before beginning installation:
- 3-Light Ceiling Fan Light Kit Assembly (Brushed Nickel)
- White Washed Alabaster Style Glass Shades (3)
- 3000K, 800 Lumen, Title 24 Certified LED Bulbs (3)
- Chrome Pull-Chain with Maple Fob
- Installation Sheet
4. Installation
This light kit is designed for easy installation on compatible Progress Lighting ceiling fans (models P2500 and P2501). Ensure power is disconnected at the circuit breaker before proceeding.
- Prepare the Ceiling Fan: Remove any existing light kit or cap from the bottom of your ceiling fan. Locate the wiring for the light kit, typically a black (hot) and white (neutral) wire, and a ground wire.
- Connect Wiring: Use the provided quick connectors to attach the light kit's wiring to the ceiling fan's light wiring. Connect the white wire from the light kit to the white wire from the fan, and the black wire from the light kit to the black wire from the fan. Secure any ground wires as per local electrical codes.
- Attach Light Kit: Align the light kit assembly with the mounting holes on the bottom of the ceiling fan. Secure the light kit using the screws provided with your ceiling fan or light kit.
- Install Glass Shades: The innovative spring clip glass attachment system allows for easy installation. Gently push the glass shade upwards into the light kit housing until the spring clips engage and hold the shade securely in place. Repeat for all three shades.
- Insert Bulbs: Screw the three included LED bulbs into the sockets.
- Attach Pull Chain: Thread the pull chain through the designated opening in the light kit and attach the maple fob.
Visual Aid:
Image 1: Assembled Progress Lighting AirPro 3-Light Ceiling Fan Light Kit.
Image 2: Dimensions of the Progress Lighting AirPro 3-Light Ceiling Fan Light Kit, showing a width of 15 inches and a height of 6-5/8 inches.
5. Operation
Once installed and power is restored, the light kit can be operated using the pull chain or a compatible remote control (if your ceiling fan supports it and a remote is installed).
- Pull Chain Operation: Pull the chrome chain once to turn the lights ON. Pull it again to turn the lights OFF.
- Remote Control Operation: If your ceiling fan is equipped with a remote control system, refer to your fan's manual for instructions on how to operate the light function via the remote.
6. Maintenance
To maintain the appearance and performance of your light kit:
- Cleaning: Dust the light kit regularly with a soft, dry cloth. For more thorough cleaning, turn off the power, remove the glass shades, and wipe them with a damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
- Bulb Replacement: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before handling. Replace with E26 base LED bulbs of similar wattage and color temperature for consistent lighting.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power to the fan/light kit; Loose wiring connection; Faulty bulb; Faulty pull chain switch. | Check circuit breaker; Verify all wire connections are secure; Replace bulb; Contact customer support if pull chain is faulty. |
| Lights flicker. | Loose bulb; Incompatible dimmer switch (if applicable); Loose wiring. | Tighten bulbs; Ensure dimmer is compatible with LED bulbs; Check wiring connections. |
| Glass shade falls out. | Spring clips not properly engaged. | Re-install glass shade, ensuring spring clips securely hold it in place. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | P2600-09WB |
| Brand | Progress Lighting |
| Color | Brushed Nickel |
| Material | Alloy Steel (Fixture), Glass (Shades) |
| Dimensions (L x W x H) | 15"L x 15"W x 6.63"H |
| Item Weight | 4.6 pounds |
| Light Source | LED |
| Number of Light Sources | 3 |
| Bulb Base | E26 |
| Light Color Temperature | 3000K |
| Brightness | 2400 lumens (total) |
| Wattage (per bulb) | 9 watts |
| Voltage | 120 volts |
| Control Method | Pull Chain, Remote (with compatible fan) |
| Indoor/Outdoor Usage | Indoor |
9. Warranty
This Progress Lighting AirPro 3-Light Ceiling Fan Light Kit is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty information included with your product or contact Progress Lighting customer support.
10. Support
For further assistance, technical support, or to inquire about replacement parts, please contact Progress Lighting customer service or visit their official website.
You can also visit the Progress Lighting Store on Amazon for more information and products.
Helpful Video: How to Select a Progress Ceiling Fan
This video from Progress Lighting provides guidance on selecting a ceiling fan, which can be helpful when pairing with this light kit.
