Introduction
This manual provides essential instructions for the safe assembly, operation, and maintenance of your Dream On Me 2-in-1 Lightweight Folding Portable Stationary Side Crib. Please read all instructions carefully before assembly and use. Keep this manual for future reference.
Safety Information
WARNING: Failure to follow these warnings and the assembly instructions could result in serious injury or death.
- Always ensure all parts are correctly assembled and securely fastened before use.
- Do not use this crib if any parts are missing, damaged, or broken. Contact Dream On Me for replacement parts.
- The maximum weight limit for this crib is 35 lbs.
- The stationary (non-drop side) rail system is designed for product safety. Do not attempt to modify it.
- Always engage the locking wheels when the crib is stationary to prevent accidental movement.
- Ensure the mattress used is no thicker than 2 inches to prevent entrapment hazards. The crib includes a 1-inch mattress.
- Keep cords, blinds, and other potential strangulation hazards away from the crib.
- This product meets applicable ASTM/CPSC standards.
Image: Safety features of the Dream On Me crib, highlighting Greenguard Gold certification, water-based paint, sustainably sourced New Zealand pine wood, and Baby Safety Alliance membership.
Included Components
Your Dream On Me 2-in-1 Lightweight Folding Portable Stationary Side Crib package includes:
- Crib Frame (pre-assembled folding sections)
- 1-inch Crib Mattress
- Assembly Tool (Allen wrench)
- Instruction Manual (affixed to the mattress support board)
Setup and Assembly
The Dream On Me 2-in-1 crib is designed for quick assembly. The main frame components are pre-assembled and fold flat for shipping. The instructions are typically found on the mattress support board.
- Unpack Components: Carefully remove all parts from the packaging. Verify all included components are present.
- Unfold the Crib Frame: Place the folded crib on a flat, stable surface. Gently pull the sides apart to unfold the main frame. Ensure the hinges lock into place.
- Install Mattress Support: Position the mattress support board inside the crib frame. Secure it according to the instructions provided on the board itself, using the included assembly tool. Ensure it is level and firmly attached.
- Insert Mattress: Place the provided 1-inch crib mattress into the crib.
- Lock Wheels: If the wheels are not already locked, engage the locking mechanism on each wheel to prevent movement.
Image: Fully assembled Dream On Me 2-in-1 Lightweight Folding Portable Stationary Side Crib in Pebble Grey.
Image: The crib positioned in a nursery, showcasing its compact size and design.
Video: A demonstration of the Dream On Me 2-in-1 Lightweight Portable Mini Crib, showing its features and ease of use. This video is provided by Jenna Glavan, a seller.
Operating Instructions
Crib to Playpen Conversion
The U.S. patented rail design allows for easy conversion from a crib to a playpen. Refer to the specific instructions on the mattress support board for detailed steps on adjusting the mattress height or converting the unit.
Folding for Storage or Transport
The crib features a unique hinge system that allows it to fold flat for compact storage or easy transport.
- Remove Mattress: Take the mattress out of the crib.
- Unlock Hinges: Locate and disengage the locking mechanisms on the hinges, typically found on the side rails.
- Fold Flat: Gently push the sides of the crib inward until the unit folds flat. This can often be done with one hand.
- Secure in Folded Position: Ensure any latches or clips engage to keep the crib securely folded.
Image: Visual guide demonstrating how to fold the crib flat for storage, highlighting its space-saving design.
Image: The crib folded and stored in a closet, illustrating its compact storage capability.
Image: The crib folded and placed against a wall, demonstrating how it can be discreetly stored when not in use.
Using Locking Wheels
The crib is equipped with dual hooded, locking wheels for easy maneuverability and stability.
- To Move: Unlock all wheels by flipping the lever on each wheel. Carefully push the crib to the desired location.
- To Secure: Once the crib is in position, engage the locking mechanism on all wheels to prevent accidental movement.
Image: Close-up of the crib's 360-degree swivel and locking wheels, illustrating their functionality for mobility and stability.
Maintenance
- Cleaning: Wipe the crib with a dry cloth. Avoid abrasive cleaners or strong chemicals that could damage the finish.
- Inspections: Regularly check all screws, bolts, and fasteners to ensure they are tight and secure. Periodically inspect the crib for any signs of damage or wear.
- Storage: When storing the crib, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight or extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Crib wobbles or feels unstable. | Loose fasteners or uneven surface. | Check and tighten all screws and bolts. Ensure the crib is on a flat, level surface. |
| Crib does not fold flat easily. | Hinges are not fully disengaged or obstructed. | Ensure all hinge locking mechanisms are released. Check for any obstructions preventing the crib from folding smoothly. |
| Wheels do not lock or roll smoothly. | Debris in wheel mechanism or faulty lock. | Clean wheels and check for obstructions. Ensure the locking lever is fully engaged/disengaged. If issues persist, contact customer support. |
Specifications
- Model Number: 681-PG
- Product Dimensions (L x W x H): 40" x 26" x 38"
- Product Weight: 30.5 lbs
- Material: Pine Wood
- Color: Pebble Grey
- Maximum Baby Weight Limit: 35 lbs
- Special Features: Convertible (Crib to Playpen), Folding Design, Wheeled
- Certifications: Greenguard Gold Certified, Meets ASTM/CPSC standards
Image: Dimensional diagram of the crib, indicating its length, width, height, and product weight.
Warranty and Support
This product comes with a 30-day limited warranty from the date of purchase. For warranty claims, replacement parts, or any product-related inquiries, please contact Dream On Me customer service.
Dream On Me Customer Service: Refer to the contact information provided in the original packaging or on the official Dream On Me website.